Members Scoutmom103 Posted April 14, 2020 Members Report Posted April 14, 2020 Thanks Folker. Space is an issue. So many beautiful cast irons being destroyed and so little space. Quote
Members arashikage Posted April 14, 2020 Members Report Posted April 14, 2020 Amazing work! I might have to try something like that with my Cowboy 810. Quote
Members iron1951 Posted April 15, 2020 Members Report Posted April 15, 2020 Beautiful. Your work inspires me. Thank you for your posts and support. Quote
Members shoepatcher Posted April 17, 2020 Members Report Posted April 17, 2020 Folker, Great restoration. Great attention to detail as well.. You keeping this one I presume???? glenn Quote
Brownie1 Posted April 18, 2020 Report Posted April 18, 2020 Wow, those are some serious modifications, it looks great! You definitely possess the ability to design and construct. I totally understand about space being at a premium .... love to put more machines in my small shop. Quote
Members eddo Posted July 21, 2021 Members Report Posted July 21, 2021 Wow... I was feeling envious of your machine restoration skills, but now you have lifted the bonnet.. and raised the bar. This is an incredible piece of restoration work, with some practical elements too meet spatial needs... please never change out that motor, it is just too nice to look at as part off the whole. I am about to purchase an old 51W56 on a similar table... I will be revisiting your restoration posts on this one and most likely pestering you for information.. and yes, my 45k is still seized, but the electrolysis bath is ready- I'm just stuck in another part of the country with Covid lockdown again... so too much time for searching for new projects! Quote
Members AJGator Posted February 2, 2022 Members Report Posted February 2, 2022 @Constabulary I recently acquired a 52W19 head and am working to put it into a table. The head came with the "male" parts of the table hinges attached. Where did you find the "female" parts of the table hinges? The parts that are actually attached to the table? I'm unable to find anything that looks like those in your pictures. Thank you. Quote
Members shoepatcher Posted February 2, 2022 Members Report Posted February 2, 2022 Certain dealers can get them. Where are you located? glenn Quote
Members AJGator Posted February 2, 2022 Members Report Posted February 2, 2022 Northern Virginia Quote
Members Constabulary Posted February 3, 2022 Author Members Report Posted February 3, 2022 (edited) They usually cost a few bucks only singer parts # is 202259 https://www.trojansewing.co.uk/?s=202259&post_type=product&type_aws=true Edited February 3, 2022 by Constabulary Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.