Kovac Report post Posted August 5, 2020 Hello there, i have a pfaff 335 and have encountered some issues. The hook grabs the top thread and drags it all around the bobbin casing and then makes a stitch. I made some progress on it, but hoping fore some help Im using a size 100 needle with 92 thread, top and bottom. Adding some pictures below Thanks in advance Quote Share this post Link to post Share on other sites
Constabulary Report post Posted August 5, 2020 I`m not sure what the problem is.... Quote Share this post Link to post Share on other sites
Kovac Report post Posted August 5, 2020 I realised im an idiot and this is ok. Juat never noticed it beforw and it seemed weird. Another question is why does my thread bunch in the beginning and end? I think the extra thread on top is getting caught? Quote Share this post Link to post Share on other sites
jimi Report post Posted August 5, 2020 Do you hold the two threads when doing the first 2 or 3 stitches?? If not, you should. Quote Share this post Link to post Share on other sites
Hockeymender Report post Posted August 5, 2020 ^^^What Jimi said^^^ Quote Share this post Link to post Share on other sites
Pintodeluxe Report post Posted August 5, 2020 I'd be using a 120-125 size needle (#19-20) for 92 weight thread. Otherwise, there's too much friction as the thread moves through the eye of the needle. Quote Share this post Link to post Share on other sites
RockyAussie Report post Posted August 6, 2020 5 hours ago, Pintodeluxe said: I'd be using a 120-125 size needle (#19-20) for 92 weight thread. Otherwise, there's too much friction as the thread moves through the eye of the needle. I agree fully Quote Share this post Link to post Share on other sites
shoepatcher Report post Posted August 6, 2020 Using too small a needle for #92 thread. glenn Quote Share this post Link to post Share on other sites
