Jump to content

Recommended Posts

  • Members
Posted

What is a good quality thread snip and where do you like to get them?

Have Consew 255RB-3, Pfaff 545 H4, Chandler 217, Pfaff 138 and Merrow 60W.  

Had a Singer 132K6, Singer 78-3 Consew 28, Consew 18, Singer 31-15 and regret selling each and every one of them :(

Posted (edited)

Cowboy 4500, Consew 206RB-4

  • Members
Posted

About 25 years ago I got a sewing machine to repair tents & rucsacs, and just got some thread snips from the haberdashery stall on my local market for about £1-25, probably less than $2. 

No idea what make they are, but they've worked perfectly ever since, for both machine sewing, and later when i started doing leatherwork 

  • Contributing Member
Posted

I use 'embroidery' scissors, bought in a knitting shop years ago. They are super sharp

I also have some pairs of snips for occasional use and for cutting thin leather lace.

like these

https://www.ebay.co.uk/itm/Thread-Snips-Scissors-Yarn-Sewing-Cutter-Craft-High-Quality-Seam-Ripper-Each/142076493897?hash=item21146b4049:g:aX8AAOSwi2lZjYJv

when I bought mine I got 3 for £1, so I bought a load and distributed them to friends

Al speling misteaks aer all mi own werk..

Posted

The tungsten scissors for Kevlar and micro tips for everything else.   Dr slick makes a dozen different models of fly tying scissors, but these are my favorites for sewing - great quality and the prices aren’t bad.

8EC0DD7C-E63D-43E9-87DA-E5F86A0A3B4C.jpeg

  • Members
Posted

Of the half dozen or so I’ve used, these made by Touro are the best that I’ve used. 
 

I bought mine on eBay, but this is a US source:  https://www.goldstartool.com/4-1-2-straight-ball-bearing-thread-nippers-touro-tesoura.htm  
 

No affiliation. 

"Make every product better than its ever been done before. Make the parts you cannot see as well as the parts you can see. Use only the best materials, even for the most everyday items. Give the same attention to the smallest detail as you do to the largest. Design every item you make to last forever."

-Shaker Philosophy of Furniture Making

  • Members
Posted

I have used a lot of thread nips over the years by many manufacturers.  I prefer the ones by Gold Seal.  Can be re-sharpened a number of times and parts are available.

glenn

  • Members
Posted

So I got of pair ones that look like this.  The pair got had poorly set rivets so maybe weren't top quality.  They are okay but I think I'll try some of the more $$ ones.

s-l1600.jpg

Have Consew 255RB-3, Pfaff 545 H4, Chandler 217, Pfaff 138 and Merrow 60W.  

Had a Singer 132K6, Singer 78-3 Consew 28, Consew 18, Singer 31-15 and regret selling each and every one of them :(

  • Members
Posted
4 hours ago, sandmanred said:

So I got of pair ones that look like this.  The pair got had poorly set rivets so maybe weren't top quality.  They are okay but I think I'll try some of the more $$ ones.

 

Those are meant to be disposable, so the Riveting is always cheaply done. Snip until there dull and just toss in the can and grab another sharp snip .
There not made to resharpen, but lightweight and fast, and if you have a bunch of machines, then it easy way to got,  just throw one of them on every machine .
I always buy couple dozen a year of ( eagle Brand ) snip's .  Buy them bulk-packs off Ebay and there only 1-$ each & free shipping .

The Snip's link that ( joon1911 ) posted, from goldstartool , right now are the Best bang for the buck-$
.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...