Members DJole Posted January 19, 2022 Members Report Posted January 19, 2022 Here's the round bag I'm making. I'm using a piped seam (for the first time) and a zipper opening. I have the first side sewn on, zipper done and strap rings all completed. But before I go to the next step, side #2, I need to check if I will be able to turn this bag through that opening. Both the round sides are 1 to 1.5mm thick veg tan, which is the sticky problem here -- will I be able to get it flexible enough to turn inside out? Or do I go to a plan B? Quote
Contributing Member fredk Posted January 19, 2022 Contributing Member Report Posted January 19, 2022 No, I do not think you will be able to turn it . . . . unless you totally soak the leather with water Quote
Members Bert03241 Posted January 19, 2022 Members Report Posted January 19, 2022 (edited) Not sure I made a loop holster out of 7 to 8 oz and I was able to fold it around and get it thru two loops. wasn't to hard. I know your situation is different but hey it might work. Whats plan B? Edited January 19, 2022 by Bert03241 Quote
Members DJole Posted January 20, 2022 Author Members Report Posted January 20, 2022 8 hours ago, Bert03241 said: Not sure I made a loop holster out of 7 to 8 oz and I was able to fold it around and get it thru two loops. wasn't to hard. I know your situation is different but hey it might work. Whats plan B? Plan B is to make one side turned, and the other side NOT turned. ;-) Quote
Members DJole Posted January 20, 2022 Author Members Report Posted January 20, 2022 9 hours ago, fredk said: No, I do not think you will be able to turn it . . . . unless you totally soak the leather with water That's what I was planning to do, so it's good to have a vote that this should work out okay. It's still going to be a pain, even with wet floppy leather, but I think it will be worth it in the end. Quote
Members chrisash Posted January 20, 2022 Members Report Posted January 20, 2022 As you have a seam allowance , why not try applying some paper staples along the edge and trying to see if it works, failing that you can just sort out the bag and lining , then turn in the seam allowance and sew around the top all the way What ever way dont forget to remove all the staples Quote
Members DJole Posted January 20, 2022 Author Members Report Posted January 20, 2022 1 hour ago, chrisash said: As you have a seam allowance , why not try applying some paper staples along the edge and trying to see if it works, failing that you can just sort out the bag and lining , then turn in the seam allowance and sew around the top all the way What ever way dont forget to remove all the staples That's an interesting suggestion-- some kind of temporary fastening around the edge. I could also just do a quick whip-stitch, like every 10 holes or so (I used a 4 mm stitching iron to make the holes), using cheap ugly thread, to test it out. Quote
Members TomMeyers Posted January 20, 2022 Members Report Posted January 20, 2022 My first thought Is a welt like a shoe sole and capture the piping. The piping will hide the raw edge the fabric can be turned. Or, roll the leather edge and sew without piping. Quote
Members Bert03241 Posted January 21, 2022 Members Report Posted January 21, 2022 what R paper staples? Quote
Members YinTx Posted January 21, 2022 Members Report Posted January 21, 2022 Don't know for sure, but I do know it won't turn at all if you don't open the zipper before you stitch that last side on. Don't ask me how I know.... It may work, considering the zipper opening is rather large, and the gusset is pretty large. You'll just have to take it slow and work it. You may get some bend marks in the tooled sides that you didn't want... YinTx Quote
Members DJole Posted January 21, 2022 Author Members Report Posted January 21, 2022 17 minutes ago, YinTx said: Don't know for sure, but I do know it won't turn at all if you don't open the zipper before you stitch that last side on. Don't ask me how I know.... It may work, considering the zipper opening is rather large, and the gusset is pretty large. You'll just have to take it slow and work it. You may get some bend marks in the tooled sides that you didn't want... YinTx Heh-- luckily, I anticipated that being a problem, so I made sure the zipper is open before starting on the last side! It will be a slow process, I bet. Quote
MtlBiker Posted January 21, 2022 Report Posted January 21, 2022 (edited) 1 hour ago, Bert03241 said: what R paper staples? Regular staples, like you use with a stapler in an office. If I've got a tricky assembly, like with a gusset that's hard to hold in place before sewing, I often use a stapler to staple the assembly just outside of where I will stitch. That way everything stays perfectly in place while I stitch and then I use a staple remover to remove them, or if far enough away from my stitch line I just use scissors to reduce the seam allowance, thus cutting them off. Edited January 21, 2022 by MtlBiker Quote
Members DJole Posted January 24, 2022 Author Members Report Posted January 24, 2022 Well, folks, thanks for the input! I didn't have to use temporary stitches or staples at all! I just finished the stitching, trimmed the piping down, dampened the leather, and turned it inside out! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.