All Activity

Is leatherworker.net a tool? It's been a great learning resource for me.

Besides books, especially by Al Stohlman my other things are; A Tandy Pro-Press. I use it a lot, for pressing stamps, as a clicker press, for making sewing holes with chisels Sets of sewing chisels with different spacing; 3mm, 4mm, 5mm, 6mm and my stitching pliers and lacing pliers A couple of sewing clamps; a light-weight one for taking out to places and a larger heavier one for use at home base My special stamping table Which is adaptable for various jobs

Thank you!

please post pictures of your machine from the rear and when tilt back from the underside and how you have installed the foot lifter.

yes, that's right, both machines were only fixed/sitting on those rubber feet.

Ah, but they haven't. Only the two top dogs resigned but those responsible for the wrongful editing remain in their jobs

Looks good from here . . . May God bless, Dwight

yup all the tool answers above need special knowledge to use them and care for them correctly, and it can all be found in a book. Also, the saddler will have a different answer than the shoemaker or the guy who makes watch straps lol. What each of us envisions as leather work usually is diferent. And I'll add this forum as a great tool also.😁 You can see those who take the critiques and advice seriously improve as time goes on, while those who blow off the help or ignore helpful tips and good advice just don't improve as fast or as well. It's not the tool in the hand, it's the hand that drives the tool. A knowledgeable craftsman with mediocre tools can outperform the ignorant man with the best tools.

I wanna thank @Dwight for recently sharing some of the knife sheaths he built. He inspired this design for some fixed blade knife sheath I made for a local knife maker. Welt on all edges. I also engraved the sheaths, as well as one of the blades and handles. I used my laser to create the template out of 1/8" acrylic. If you are interested in a template let me know.

That's a fantastic idea! Thank you!

Hello, I'm looking for help with the knee lifter placement for my recently purchased Singer 112W115 double needle machine. I purchased a table top and had some difficulty finding mounts for the machine head, but finally got that resolved (I think). I installed the oil drip pan, motor and belt. I purchased a knee lift (photo attached) and lined it up with the space in the oil drip pan, but when I try to engage the knee lifter it does nothing. What am I missing or doing wrong? Where should the knee lifter make contact with the machine?

Mablung is right. I could shave with any of mine. I strop before using, every couple cuts during and after before putting it away.

Thank you very much for getting back to me. @nejcek74 thank you for confirming where I need to place the machine to the table. I was told recently I should the placement in the pictures attached and that I can use the rubber insulator without any additional bolts to rest the machine head on.

Whenever something upsetting, concerning or important happens in the world, I try to remember to look at what the severely TDS affected authors publishers and presstitutes have to say. Now that the BBC has fired those guys, my options are narrowing...

A blade can never be too sharp for skiving, but it sure as shootin' can be too dull, even if it's plenty sharp for cutting. Sharp, sharp, and sharper.

Books are always tools, in a different sense. Intellectual tools, which are the best kind. To paraphrase another saying, the mind is the final tool.

Some things never change. In 1787 Thomas Jefferson called out the British gazetteers of the day for fake news: "Wonderful is the effect of impudent and persevering lying. The British ministry have so long hired their gazetteers to repeat and model into every form lies about our being in anarchy, that the world has at length believed them, the English nation has believed them, the ministers themselves have come to believe them, and what is more wonderful, we have believed them ourselves. Yet where does this anarchy exist? Where did it ever exist, except in the single instance of Massachusets?"

Welcome from SW Missouri! As mentioned...lots of good stuff here.

oh, i get it now. Of course, the maker logo on the front/face of the hub and maybe the specs of the machine age and any pertinent info around the hub.

Welcome! There's a wealth of knowledge among current participants and in the archived posts. A tip that I regularly use is to search the site with Google using the syntax: site leatherworker.net your key words here Look forward to seeing your work.

Books, books, and more books! Don't know if you would classify them as a tool. but the knowledge I have gained from them has enhanced my work much more than any specific tools have.

the parts list may help you pfaff_471-474-491.pdf

I have few old US machines, like 52900 and 53100. They are not in use at the time, as of lack of space :)))) Here is a pictures of the original table. At least for those two machines the tables are the same. They are very finely engineered, with pre-made holes for rubber fits, hinged access for the machine etc, lower board that can be fine tuned into the position etc. For sure made with a rig in a factory. For a single use I would do it much simpler. Ok, I would have to do it much simpler, as I don't have necessary machines :))))

I should have clarified in my first post. This old gal's working days are OVER. She's a retired garage queen now. I'm not looking to rebuild the pulley, just want to make a nice leather "show cover" for it.

Witcher Leather Top Hat - Etsy UK