All Activity

My first call would be to Campbell-Randall. They are on here as a member but you will get faster results calling them.

I’ve found a singer 29k171 that is an offer I can’t pass up in Connecticut where I’m visiting. I live in AZ does anyone have any ideas on how I can get this monster back home with me for the most reasonable cost? Thanks!

I just wanted to thank everyone that responded to my other post looking for help picking a machine. Without your advice, I might have ended up with a much more expensive machine and disappointment. Instead, I spent $200 and a several hours cleaning and swapping out the motor on this beautiful Singer 211g165. I got the servo for free from a friend that had it lying around collecting dust, so I got a great deal on that! Anyway, allow me to show off DeVille #9 (the factory it once lived in, and the number on the table). If anyone has stories to tell of theirs, helpful info and links, etc. please share!

welcome and nice items

Beautiful work with some unique style. well done.

Hello Today my skiver decided to literally scream at me and shut off. She still gets power but will not turn on. I don’t have a manual and it’s such an old machine I can’t find much info online. Has anyone had this issue? I appreciate any help you can give me. It’s a Fortuna HIGH PRECISION BAND KNIFE SPLITTING MACHINE Thank you Morgan

Great work! Welcome!

What fun stuff! I love all of it.

Thanks for the kind words. I'm gonna have to look for a set of maple grips now haha.

Pictures this afternoon. From the tool marks and screw heads I think this was worked on several times for sure. I'll update. Thanks!

You're on a slippery slope now. Might as well start saving up for that walking foot industrial.

Thanks everybody! With the thread I have and a 110-18 needle it’s working good! I’m traveling slow but somewhat erratic on this practice piece. Will check the chart! Thanks! Dano

does not sound like a 7-34 - just from what I have in mind it sounds a bit like Singer 7-10 (or similar) thread regulator spring - but I´m just guessing... We need pictures I´d say. 😉 Barrel hooks always appear a bit sloppy cause the thread needs to slide around it.

The largest needle commonly available for domestic sewing machines is a #18/110. I once found some #20 needles for an old iron body Singer from yesteryear. Those machines held up much better than the plastic body machines of today. I mentioned this because most so-called Upholstery thread is #69 bonded nylon. This size is normally sewn using a #18 (Metric 110) needle. Leather point needles work best on leather, as opposed to round points. You should be able to get a decent stitch using #69 thread with a #18 needle by balancing the bobbin vs top tension and enough foot pressure to keep the leather from lifting with the ascending needle. But, if you plan to sew leather on a regular basis, buy an iron body walking foot machine that's mounted on a 20 x 48 inch industrial k-legs frame and table and powered by a 3/4 HP servo motor.

I did mean the marketplace here. That's why I linked to it. In fact, I'm not on fb so it never occurred to me that there might be confusion... 😄

To me, that shredding still looks like the needle is too small for the thread. If that thread came from a regular fabric store, I wouldn't think it's bigger than v69. According to this handy chart it wants a 16 OR 18 needle. Maybe an 18 will solve the shredding. How about trying some smaller thread with your size 16 needle on some scrap? It might prove the concept.

Wonderful Work Welcome to the forum.

Hi! I’m Olena, a leather designer who enjoys creating a bit unusual patterns. I love animals, so you’ll often see them in my work 🐾, but I also get inspired by steampunk and fantasy ideas. I share my projects on leatherpatternts.com and make video tutorials for each pattern on my YouTube channel.

I moved your post to Leather Sewing Machines

But now it’s doing this, took off walking foot but this is just two scraps.

Part of the process of tanning is adding back oils/fats and one of the treatments is called fat-liquor. From what I read - not a single substance but various sorts of sulfonated oils depending on tannery. I was told years ago that sulfonated neatsfoot oil was one of them - one of the major ingredients in Lexol leather conditioner. The reason that the historic casing mix recipe I was given contains Lexol conditioner.

I'd go for the for sale section on Leatherworker.com before I did anything else. Going over to marketplace you're not gonna have the same people looking that they do at Leather worker

I like how you're thinking, but I'm not gonna find my work truck in a scrapyard. I should have specified it's a semi.

Trying to help someone who just acquired one of these, but no help or info from the previous owners. New owner isn't experienced. Threading through the tensioner and check spring - parts don't look the same as the parts manual. Check spring has an external little coil along with the standard U-shaped bend. The check spring adjuster/stop has a wide range possible. Timing seems off, Hook/shuttle, bobbin case mechanisms appear sloppy. Any guidance appreciated! Can get pictures later today.

Changing needle seemed to work!