RMB Custom Leather

I will keep trying stuff, it has been very inconsistent the whole time I have had it. Wish I would have kept my class 3 now even thought it shouldn't matter. I am sure it's just an adjustment issue. Thanks for all the suggestions!

Yea I will post a longer better video. Yes I do hold it for the first 2 or 3 stitches. The top tension has been a pain since I have had the machine not sure. My class 3 that I had ran smooth the whole 5 years I had it this machine not so much.

Yes but I re threaded it a couple of times just to make sure I didn't forget something.

No idea why it wouldn't let me type a post along with attach the video but anyway. Been having issues with my class 4 off/on for a while. It often times skips stitches, has loops on top, and loops on the bottom all spastic. Now it is getting all bunched up and binding up from what appears to be the bottom or bobbin assembly. Have no idea what to do really I have adjusted the top tension and the bottom via the small screws on the bobbin. I have also tried to adjust the timing. The needle is installed correctly. Can anyone suggest anything else to check or give me some feedback after watching the short video of what it is doing? No idea why it wouldn't let me type a post along with attach the video but anyway. Been having issues with my class 4 off/on for a while. It often times skips stitches, has loops on top, and loops on the bottom all spastic. Now it is getting all bunched up and binding up from what appears to be the bottom or bobbin assembly. Have no idea what to do really I have adjusted the top tension and the bottom via the small screws on the bobbin. I have also tried to adjust the timing. The needle is installed correctly. Can anyone suggest anything else to check or give me some feedback after watching the short video of what it is doing?

IMG_2735.MOV

Thank you for taking the time to put the list together

email pics rob@rmbcl.com

I will take dies paypal rob@rmbcl.com . Tried to PM but site is screwed up on PM's I will take dies paypal rob@rmbcl.com

Here is another maker that has impressed me. I have used these molds to make Kydex and leather holsters and they have performed surprisingly well. They are rough around the edges but they work good and are only $24.99 free shipping. New molds are added periodically. http://www.bluegunstore.com/privatelabelmolds.aspx

Not sure if your wanting that exact clip or the standard version http://www.bluegunstore.com/metal-holster-clip---lot-of-12---clip6-07.aspx Quantity Amount 12 to 49 $2.24 50 to 99 $1.24 100 to 499 $1.10 500 to 999999 $1.00 FREE SHIPPING

Jason, I plan to get that going again just haven't done it since I changed sites a couple years ago. That will be added to my list to do in 2016.

I hope this will solve the mystery. You can click the links to go to the items on the site. The CZ's are very confusing due to how close the part numbers range. It seems like some of mold manufacturers name them differently which helps with the confusion. I am pretty sure after some back in forth we now have the pictures matched with the correct gun but if you see an error let me know so we can investigate more. CZ P-07 CZ75 P07 CZ P-09

As most know we don't have much room on our prices to offer many promotional discounts especially since (except for a few items) have free shipping on all orders. But we are offering $5 off your next order of at least $100. This is in addition to the quantity and other discounts that are applied automatically depending on quantity purchased and total order amounts. The discount code is :BW2015 Valid: 11/26 - 11/29

As most know we don't have much room on our prices to offer many promotional discounts especially since (except for a few items) have free shipping on all orders. But we are offering $5 off your next order of at least $100. This is in addition to the quantity and other discounts that are applied automatically depending on quantity purchased and total order amounts. The discount code is :BW2015 Valid: 11/26 - 11/29

January 1, 2016 All Bluegun items will increase $2 in cost. This will be necessary in order to offset the manufacturers increase in price. There hasn't been a price increase in two years. As long as you order before January 1 you will get the current pricing, after January 1 it will go to $49.99 free shipping for an unweighted gun. I haven't heard from the other manufactures yet if an increase will be coming, I will share information once I get it. Holiday schedule. There will not be any orders shipping during the below dates, unless they are showing in stock. You will still be able to place orders anytime but they will not ship during these dates. It is best to get your orders in by this week. 11/26 – 11/27 12/23 – 1/3 www.bluegunstore.com

I have a clicker die to make this one I'm assuming you want it in plastic but this is another option. Price depends on the amount you want http://www.rmbcl.com/custom-leather-shoulder-holster-mag-holder-vertical-holster44/#

Take a look and watch the videos http://www.bluegunstore.com/ULTICLIPHolsterClip.aspx

Pretty cool

Well deserved! Well deserved

Here are several styles some pics below but more on site. http://www.bluegunstore.com/search.aspx?find=backers

Very sorry for you loss. I haven't ever heard of a leather urn either. Have you thought about a wood one covered with leather so you could still do tooling patterns on the leather?

Bob I would say the vendor will not charge a restocking fee in this case most of the time those are for the person who orders item after item and continues to return in without a good reason. What was their response when you contacted them about it?

Sounds like you may have found a contact but I figured I would offer up mine as well http://www.rmbcl.com/options/ . Located in NC.

There are several ways to do this this is just one of them and it isn't as detailed as hand tooling the lines in like a lot on here do. You can also do this by hand but this sure makes it much easier . Here is the link to the press if interested well worth the money http://www.bluegunstore.com/VerticalHolsterPress-Kydex/LeatherFormer.aspx .

I've made alot of holsters but not a back holster. I see that most small of the back holsters generally hold the gun in an almost up side down position. I have a customer who wants his holster the opposite way so that the gun sits in the holster right side up at a cant. Would there be a reason not to make it this way?