Jump to content

1hp

Contributing Member
 View Profile  See their activity

  • Posts

    85

  • Joined

  • Last visited

 Content Type 

Everything posted by 1hp

  1. 1hp
    the "Machinery's Handbook" has enough info on threads to make your head explode.
  2. 1hp
    maybe this helps: TORO3000_3200_4000seriesOperatorsManualVerSeptember2014.pdf
  3. 1hp
    you can remove pins from connectors without cutting the wires. https://www.cycleterminal.com/terminal-extraction-procedure.html
  4. 1hp
    It's too nice to use.
  5. 1hp
    there are at least two sizes of 4 wire plugs. bought the wrong one first. this instruction sheet may help: Servo Motor Technician User Manual(v3.7 L-Type 4-Bar for ShuangZheng).pdf
  6. 1hp
    7" from the hinge on my 206rb5
  7. 1hp
    ask here: https://www.facebook.com/groups/101589880193668
  8. 1hp
    this works for me: https://heprecision.com/shop/ols/products/narrow-presser-foot-set-stainless-tight-radius
  9. 1hp
    these work pretty well. https://durston.com/product/ring-shank-bender/
  10. 1hp
    my mother once put a needle through her thumb nail. very gnarly. i always wear safety glasses while using a machine. never know where broken needles might go.
  11. 1hp
    this guy makes some excellent parts: https://heprecision.com/shop/ols/products?page=1
  12. 1hp
    better to get your last machine first.
  13. 1hp
    these are oil wicks for Consew 206: https://parts.jacksew.com/oil-wick-consew-18110/?searchid=227348&search_query=18110
  14. 1hp
    on my 206rb5, the reverse lever shaft is on the right side of the head. there is a hole near your bobbin winder in a similar spot.
  15. 1hp
    looks similar to the original motor on my 206rb5. Consew_CS-1001 (1).pdf Motors-Con-Serv1000.pdf
  16. 1hp
    this craft, 2 machine minimum.
  17. 1hp
    on my Cobra 4, they are 11/64-40. got some on ebay.
  18. 1hp
    tig weld with nickel rod. pre-heat & post heat. cool slowly in insulation. we do this alot at work.
  19. 1hp
    if you highlight text & right click, chrome has translate in menu.
  20. 1hp
    Check out Bruce Johnson's web page
  21. 1hp
    $15 a foot at McMaster-Carr.
  22. 1hp

    made loop stick

    1hp replied to 1hp's topic in Leather Tools

    nice. this is 6061 aluminum.
  23. 1hp
    made loop stick as seen in J.H. Leather video: amazing leatherworking skills on display in her videos! it is 1"x1/2". taper is 8" long. 3/16" to 1/2". cut piece on table saw, tapered on mill & rounded edges on router table with 1/32" radius round ov
  24. 1hp
    @brucejohnson sells bleed knot tool.
  25. 1hp
    nice to have extra feed dogs to experiment on.
×
×
  • Create New...