Search the Community
Showing results for tags 'clicker'.
Found 98 results
-
Local Pickup Only. Denver Area For sale, this was a custom made, standing hand clicker press. Works fine, but I’m no longer doing any leather work. Comes with a few custom made dyes also. $800 obo
-
hello i have a herman schwabe model d clicker that broke a return spring. i was wondering if anyone here had the procedure for replacing the spring? i have a new spring but im not sure of exactly hoe to go about replacing it. Do i thread the spring adjustment all the way out until i can get the hook out of the bracket and then spin it back in? which end of the spring to attach first and are there any special tools ill need. Thanks in advance
-
Hello! I've been researching all the leather cutting options for a while now. So I am new at leathercrafting but I would like to find a way to make perfect cuts so I could make good products. I have very little space - 1.5x1.5 sq.m. and I need a little machine for that purpose. The options I researched are as follows: Laser To use a laser for cutting skin, it is necessary that the laser has a power of at least 10 watts. Mandatory should be added air assist to get less skin burns, encloser, as well as perfect ventilation. My space is easy open air area and I would not have problem with ventilating. Lasers that would work for me are the following: Wainlux K8 - That would be the best option due to size and portability. The big downside is the working area /130x130 mm maximum/; Longer Ray5 10 W - may the best option for me. Ortur LM3 Laser Ortur LM3 LE Laser Engraving & Cutting Machine Atomstack X12 Pro Atomstack P9 M50 xTool M1 10W - best quality. May be the first laser and also with blade for cutting. CNC with drag knife - looks good but very big and loudly. Not compatible for me. Cricut Maker 3 & Cameo 5 - both look amazing. They can cut leather but I don`t know. i would like to know your opinion about that those two. Sizzix - I find on amazon "superdant" store. There cutting dies for leather which work with sizzix - 1/2/3/4 . But that`s it. I don`t know if they can make it custom patterns and I have doubts for the quality. Clicker press - I think that would be the best option for me to buy low cost clicker press. I was looking that ones by vevor: 1/2/3 . I have problem with their weight - around 30-40 kg. I was looking for a smaller by zonesun like that ones: 1/2/3 - but I would by a machine for 120-200 $ and pay 200 $ shipping .... Arbor press - looks good for 50-100 $ I could buy an arbor press 1 or 2 tons. But than I have to order a base and the only good option I found is that one - link . The cost is 120 $ without taxes and shipping so no thanks. I would like to start with wallets and small stuff - no bigger than a medium bag. I try to cut by hand but the finish is not good enough for me. I don`t like it and got frustrated. I'm already seriously confused about which path to choose to start with. I ask for your opinion.
-
20 TON CLICKER PRESS AVAILABLE $6900 Leather Press/Clicker available for sale. Gently used only once or twice a day for four years Sarasota Florida Local Delivery Available ASKING ONLY $6900 MSRP $12,300 -
Hello crafters and business people. I have a used 25 ton Herman Schwabe clicker press to sell. It is a beast and works like a charm. It has a giant cutting bed that measures 30”x39” which is big enough to click out most anything. It runs off of 3 phase electric but it comes with a power converter so that it can be run about anywhere. Asking 4k or better offer.
-
Strong, reliable workhorse 20 ton hydraulic click press for sale. This machine has been in almost daily use in our shop, has been regularly professionally serviced, and is in great shape. The only trouble it's given us has been the occasional relay switch wearing out. Asking $5000 CDN If you're interested, or have questions about the machine, please shoot me a message. Thanks. Specs as follows: 220 v / 3 phase Bed 20" x 40" Head 24" x 18" Overall Depth - 34" Overall Width - 40" Overall Height - 66" Weight 2000 lbs Located in Toronto, Ontario, Canada
-
Clicker services available. 25 ton Model D Schwabe. Please feel free to contact with any questions.
-
very lightly used clicker press. original owner (Bota of Boulder) used it as a back up in case his main one was down for service, which he said rarely happened. his business stopped operating 15 years ago and the press sat in his warehouse. i have owned it for 2+ years, but have only had power to it for the past month. sadly, i just found out i have to move and don't have anywhere for it. electrical hook ups, cutting boards and phase converter included. http://www.freemanschwabe.com/presses/schwabe-presses-machines-systems/schwabe-model-d-clicker-presses RATED CAPACITY ............................... 25 TONS STROKE ...........(ADJUSTABLE)................ 1/4" - 3" SWING ARM .................................... 13" X 24" TABLE ........................................ 20" X 40" MOTOR SPECS .................... 3 HP MOTOR, 208/220/440 VOLT FEATURES: - 2 HAND OPERATION - AUTOMATIC SPRING RETRUN FOR FASTER OPERATION DIMENSIONS: 48" X 40" X 72" H WEIGHT: 3,000 LBS. $2800 press is located in Boulder, Colorado 80304 thanks, joel, 646-246-4096
-
Schwabe Model D 25 Ton 14" Swing Arm Head Hydraulic Clicker Press - Baldor Motor Asking $4,000 Email for Pics Mtgreen32@gmail.com Click out Patterns in the thinnest or thickest leather, Kydex, Plastic & tons of other materials in seconds with the press of 2 buttons! The head swings side to side with just a finger push. If the Die fits on bottom table(About 45"x20") it will Click it out Every Saddle, Gun Holster, Knife Sheath or Tack set will be exactly PERFECT and uniform making much more professional products. Open to Partial Trades. Great Machine that is a great addition to any shop. SAVES TIME Instead of spending HOURS Cutting and it never comes out perfect, same amount of work in Seconds even have holes punched or anything else SAVES MONEY With a Clicker and Dyes you can lay them out to get the ABSOLUTE most out of your leather, no need for trim, every piece will be exactly how you want it and you can make every inch count! Can be moved or unloaded with Bobcat or Forklift Freight would be determined on distance, also could pick up from my shop or I could deliver if it was no more than 400 Miles from Greenville, SC for a price. Email me for Pictures Mtgreen32@gmail.com
-
Interested in selling a United Shoe Machinery Company ICM-C leather clicker, used in late 70s and early 80s by my father who made fire bellows for LL Bean. I last saw it up and running in 2015 but have not tried to run it since. Haven’t located a manual for it. Research shows the machine is from 1958, stamped ICM-901. Located in WI northwoods. I’ll help load anyway I can. Also have 500+ feet of Swiss chocolate Heritage leather, grade TR-X and other bellows-making material. Originally purchased from Cudahy Tanning Company out of Cudahy, WI which merged with Prime Tanning Company out of Maine in 2007. -
Lightly used Mighty Wonder clicker press and sturdy, adjustable height workbench for sale! Both pieces in great shape. Asking $1,200 for the pair together. The press was originally $1,500, and the workbench was over $300. The workbench has a solid butcher block top, with holes drilled for the clicker to bolt securely through the surface. Very sturdy and heavy duty, it's been a great set-up. Pick up in Memphis, TN.
-
NYC company is selling an almost new Master Tools 8 Ton Clicker. Approx. 1 year old. It's their newest version, with a welded top. Selling with cutting board -- one side completely new, the other side has some cuts into the board. It can handle fairly large dies for cutting and embossing. They used it to cut 10oz leather. Can be shipped on a pallet from Brooklyn New York. If you'd like to estimate shipping cost, the machine on a pallet is about 370lb. Here's the link from Weaver Master Tools: http://www.weaverleathersupply.com/catalog/item-detail/37758/001/156 $2500 + shipping DM with details and where it would ship to purchase. Please serious inquiry, ready to buy, only. Thank you!
-
From my shop that closed in 2015. Good sharp Weaver-made clicker dies. Billets shown with ruler for size. The regular and crossdraw holsters are Meanea patterns and make the final product pictured. The holster dies are for 7 1/2" Colts and clones and the pattern can be shortened to fit shorter guns. Pictures are of 7 1/2" and 5 1/2" holsters Sorry I didn't have better images. Prefer to sell as a lot for total $450. PM me for additional info. Shipping at cost.
-
Selling a turn-key leather goods business (www.gifthighland.com) with over $2.2M in sales since 2012. Second kid, two companies and classic cars take precedence at this time. Wanted to store equipment with the hopes of starting up again in the future, but doesn't make sense at the moment with my growing family. Located in design district of Dallas, TX. Asking $95,000 includes everything below: Leather Equipment Fortuna 12' Band Knife Splitter w/ new blade Atom 20 ton Clicker Consew 206RB Sewing Machine Techsew 2700 Sewing Machine Brother Walking Foot Sewing Machine Cowboy CB4500 Cylinder Arm (all black model ) Cobra NP4 Skiver Cobra NP10 Double Feed Skiver Rossley Pneumatic Edge Folder Kwickprint Debossing Model 86 Kwickprint Debossing Model 64 (pneumatic setup, foot pedal activated, mounted on cast iron stand) Gluefast 20" Colonel Glue Up Machine RC50 Edge Painter Hand Press Rivet/Button Setter (x2) Heritage Foot Press Weaver Power Edge Sander/Slicker Misc Steel Clicker Dies (105 dies - wallets, key chains, mouse pads, coasters, portfolios, etc) Font Sets (x4) Company Logo Dies (200+...Nike, Adidas, JP Morgan, Gulfstream, etc) Speedtron 2403cx photography setup (all lights, controller unit and all cables in perfect working order) misc tools, needles, threads, heat stamping foils, cutting boards, snaps, buttons, etc Misc Shop Equipment Uline Plastic Bag Sealers (x2 - 12" and 8") 10'h x 8'w x 4'd Metal Warehouse Storage Racks (x8 Units) Small Metal Warehouse Racks (x3 units) Rolling Metal Storage Rack for shipping boxes Rolling Kitchen Rack w/ 12 trays Rolling Stainless Cart Air Compressor Quiet 5500LB Pallet Jack Packing Paper Roll Cutter 4'x8' Wooden Work Tables (x3) Misc plastic uline storage bins for tools, snaps, conchos, etc Customer List - I will provide historical sales data and all contact phone numbers, emails, company names, etc. (sample of customer list - MGM Properties, Gulfstream, New York Jets, JP Morgan, Montage Properties) Website & Product Photography - www.gifthighland.com , all hi-res product images (hundreds), latest product catalog in Ai format Leather and Misc Inventory- Approximately $5k worth of leather sides (Sepici, Horween, Hide House) and $20k of excess inventory from old orders including check book presenters, key chains, portfolios, tote bags, golf club head covers, briefcases, etc. I am including this inventory at no cost since some items have corporate branding. Consider it as free marketing materials. Manufacturing Partners- I will also introduce you to my manufacturing groups in Hong Kong and Los Angeles, perfect for large orders, custom products and anything you cannot make in-house.
-
Hello everyone! I’m new to the forum. I started my leathercraft journey earlier this year. My business has been taking off and I’m now in the market for a clicker press. I’d like to find a nice used one that’s not to expensive. ~ $400 - $800 range depending on the press, including shipping costs. I’m hoping there’s someone out there that has upgraded to something larger, power, or even laser and doesn’t need their 4 ton or smaller manual clicker press anymore. It will really help my small business production wise. Looking forward to seeing what you guys have. God Bless, Anthony.
-
I have a Tippmann 1500 Clicker press with table and a Husky 20 Gal. 175 PSI air compressor for sale. I am moving to a smaller place and sadly the Tippmann won't be able to come with me. I'm asking for $2000.00 for everything.
-
Hi folks! I’m new to the forum, I hope this is the right place to post this. I’m considering purchasing a Hytronic cutting press that came up for sale for a good price (I think?) but I really don’t know anything about them so I don’t know what I’m getting myself into. Google search isn’t giving me much info about the press, I’m wondering if the person selling it didn’t give me the whole model number, or if there just isn’t any info online about these things. It’s in the seller’s storage so I can’t test it out first, but I want it to cut 5oz chromexel pieces with the largest die measuring 12” x 6.” My understanding is that the machine is a 220v power, not air compressor. Any info or familiarity you might have with this machine is appreciated. Thank you!
-
These two dies are for armbands, which retail at $30 each. Asking $50 per die.
-
Location: Los Angeles, CA 90057 I have a Master Tools Mighty Wonder 4 Ton Hand-Operated Clicker that is in near perfect condition for sale. The only part in need of replacing is the hard plastic where your leather sits. It currently is usable, just not in mint condition. This machine costs 1,450.00 brand new so this is a great deal. Nothing wrong with the machine, just don't need it anymore. $1,000 price is non-negotiable and this is local pickup only. Thanks! Here is the link to the original product site: http://www.weaverleathersupply.com/catalog/item-detail/25365/001/53 -
I was in the market for a steel rule die and searched online -- preferably for a local shop in NJ. After contacting 3 companies for quotes, 2 responded and one had the better price. I sent out my emails in the evening and by next morning, Eric from http://ruleonedies.com was the first to respond. He quoted me a good price, paid via paypal and was surprised to get an email the next day that it was shipped out. So, it took just 2 days from emailing a design to receiving my finished die. That's some insanely fast turn-around time. I ordered the steel rule in a clear base. I printed my Adobe Illustrator file onto paper and clicked over it with the die -- exact match! The die is sharp but I need two passes on my Weaver Might Wonder press to get the full knock-out due to the size. So, in summary: http://ruleonedies.com - good communication - good prices - very fast turn-around time
-
Weaver Mighty Wonder 4 Ton Clicker Press for Sale: Comes with extra clicking pads. Can use 3/4" or 1 1/4" dies. It's in great shape. Located in Austin TX, Prefer local pickup but I can look into shipping options. Asking $1000 obo You can reach me at 512-850-8564, call or text.
-
I have a Tippmann Clicker 1500 Die Cutting Machine on a rolling table for sale. I am moving to a smaller location and have to down size. I am asking $2500 OBO. If interested I can send pictures and details.
-
Hello! We are a small leather goods manufacturer and we are consolidating our machine inventory! We have several industrial machines available. All machines are in used, working condition and are sold as-is. They have all been in use in a production facility most recently in December 2018. Please DM me if you would like more information in regard to pricing and photos. Please make an offer! If you are in the Twin Cities area, we would be happy to coordinate a showing for you. Please arrange your own pick up/delivery/shipping - we have a loading dock for convenience. Cash only. We have the following machines for sale: Leather Machinery Fortuna 3443 Band Knife Splitter United-Carr M 235 Kickpress Judson L. Thomson 21. 2776 Kickpress Prym Press Pneumatic Snap Setter Schaefer TC 15 Topside Cementer Franklin Imprinting Machines A11593041 Hot Stamper Kwik Print 425 Hot Stamper Central Machine 37151 Metal Cutting Band Saw (x2) WSK PP-34F Pneumatic Embossing Machine (x2) USM Emhart Clicker Model B Brute Eastman Class 627 Table Knife Royersford Excelsior No. 10 Kickpress United-Carr M235 Kickpress Sewing Machinery (x3) Adler 267 Walking Foot - $900 Consew 206RB Walking Foot - $700 Consew 227R Walking Foot Cylinder Arm - $1,400 (x2) Juki LU-563 Walking Foot - $900 Juki DLN-415-4 Needle Feed, 220V - $750 (x5) Seiko STH-8BLD-3 Walking Foot - $900 (x2) Seiko LSWN-8BL-3 Walking Foot - $1,100 Seiko LSWN-8BL-3 Walking Foot, HEAD ONLY - $700 Singer 111W151 Needle Feed - $500 NEW - Typical GC2263V Walking Foot Cylinder Arm - $2,000 Thank you for your interest! -
Bata clicker press and dies for sale. Over 50 dies for saddle and tack, holsters etc.
-
When one of my hobbies demand a tool my other hobby skills come to the rescue. Starting out in leatherwork I may not have the money to have fancy equipment but I do have the means to build what I need. Maybe someday I may get into selling more leather creations but for now, I am just preparing in case I do get serious in the future by having fun building cool things now. The die bender is very simple and works well. Using Autodesk Inventor software I worked out a functioning model to build into a tables surface and a handle to push downward to counterforce any table movement that it may cause. I already have an idea to make a different version that will be able to change out the bending points (whatever they are called) and stay out of the way of the bending steel rule on itself by making most of the mechanism under the surface of the table like a few commercial designs out there. The manual clicker press (pictured below) I made after a mini hydraulic press I saw online. Made some improvements by welding the joints solid instead of nuts and bolts (nobody ever takes them apart) for better rigidity and with tighter tolerances on the sliding parts so the press works smooth and solid. Still, need a few tweaking on both machines but overall they were a success for my needs. I would not recommend anyone asking me to make one for them because you can purchase the same class of tools in the open market for the same cost of what I would charge to make plus, the shipping cost. That said, in material cost, the press was estimated 40$-50$ and the die bender was built from scrap I had laying around. I am always open to suggestions and ideas for DIY projects like this that starving artisans like myself can benefit.
