Search the Community

Hey, I am trying to buy a proper Draw Gauge online. Quality is the most important thing to me, and I want to get the best return for my money. Is "Weaver Leathercraft" a good website to buy from? Thanks for your help, Karl

Beginner wants to know where to buy colored and thin veg tan leather. I know Rocky Mountain but seems a little expensive. I tried Springfield but I think they only have original colored tooling sides. Just wonder if you guys know any other places selling dyed veg tan except RM. If not, I will go for Rocky Mountain.

Hey everybody. I am looking to purchase a 5 in 1 cutting machine or something along the lines. I live in Maine and would travel anywhere inside New England to pick up but would also pay shipping to any willing parties. I am also looking for a sole press of any short, hand crank, lever, pneumatic. Considered making one but thoiught I'd try here first. Thanks

I will be building New yankee workshop's cigar chair. How can I order a whole hide of upholstery leather brown and know that I'm getting a quality product? This will be my first leather project ever.

(I was told this was the right area to post this in, so sorry for those who see this as a doublepost.) Hello! So, this is my first post on leatherworker.net, and I have quite a few questions regarding leather weight, purchase inquiries, leather types, and copper rivets. But first, some background... My name is Caracal Keithrafferty, and I'm located right by Milwaukee, WI. I made my first large purchase of leather tools, dyes, and hardware late last summer. The tools I have are: Knives V-Gouge Awl Edge Beveler (Sz. 3) Parallel Stitch Groover 2 Overstitch Wheels (Sz. 5 + 6) Bone Folder Edge Slicker Wood Hammer (I was considering an epoxy or rubber hammer; can't afford a good rawhide one) 2 cutting mats Dyes and liquids (and related items) I have are: Wool Daubers EvoStik Time Bond Contact Adhesive (haven't used it; not really sure when, how, or where one would use it) Carnauba Creme Gum Tragacanth Tan-Kote Neatsfoot Oil (Never used it, not quite sure what it's for) Leather Sheen 8 different dyes Hardware (and related items) I have are: Lots of scrap leather from Hobby Lobby; mostly small pieces. A couple different hammering tools 2 small anvils (one is damaged) O-Rings D-Rings TIny buckles Various rivets *Note: To describe the rivets and other hardware further might be challenging. I know I have some snaps, and I can set those properly. I have many tiny eyelets (the ones that mushroom out; one piece). I have a couple of grommets (2 pieces, brass look to them), but I don't believe I have any of the necessary setting tools. I have some single cap rivets I believe, but they are missing the male end I believe. I used all my copper rivets; even with improper tools, I made use of them (and I plan to purchase many more in the future. Any suggestions on what I'd want?). Aside from those, I have some other ones I'll call mystery rivets... I've got some that are long tubes (7/16 inch or so) that are unthreaded on the inside. I'm not sure how they're used. I've got other ones that look like grommets, but are non-flowering like the eyelets, and have a short shaft. I don't know if they're part of something. There's another kind that seems similar in for to the snaps, but is missing a 4th piece. They are definitely different from the standard ones; one cap has a little piece of metal lifted up, another part has tiny holes and grooves on it, maybe implying that it's supposed to change shape when tooled. Another kind I have are only few in number, but they're flat-bottomed, have a moderate/small sized shaft, and have a tiny hole at the end of the shaft. Lastly, I've got some solid ones that I have no idea how to set. They have long shafts, end in a dome on one end, and about 2/3 of the way down from the dome have a disc solidly on the item. It may be related to a Sam Brown rivet, but I am unsure. I also have several split pins, but I don't know if they're related to leatherworking at all. Those are all the leatherworking related items I have at my disposal currently. I do not know how to sew leather, and I am not quite sure where to start. All the items I've seen sewn so far have been with very thin leather, and I hardly to never work with thin leather. Can anyone suggest some hand tools for me to use? I did some brief research and though about buying, but I have no idea where to start. I cannot afford machinery, but hand tools might work. I have dyed some leather a fair amount, and I've learned how to smooth edges and backs of leather well enough. So, as far as that goes, I have down the technique, just not the perfection. I can hammer rivets well, and I can cut leather just fine. But what I need now is information on leather weight, proper leather types, and other items needed for making basic armor for LARPing. I've got a friend who wants me to make him some armor. It doesn't need to protect much, and he's seeking form over function. I also want to sell at other LARPing conventions. More details on armor: My friend Geoff has commissioned me to make him a set of armor consisting of: pauldrons (shoulder armor) that go from arm-to-arm over the shoulders, covering the arms up to the elbows; greaves (shin armor) that go up to the knees, but don't cover them too much (I have this part mostly done, should I post photos?); sabatons (foot armor) that cover the instep of the foot, and covers the ankle bone on either side; and that largest part being the breastplate (front body armor), which only needs to cover the chest, the belly, part of the sides, the collarbone, and little to none of the lower back. He also told me that a long term project I could do with him would be a plumed helmet. Another one would be a Romanesque skirt. The overall look he's going for would be somewhat similar to a roman soldier with a mix of some medieval aspects. It does not need to be historically correct, just similar in its look. What I'm not worried about is making the whole project aesthetically pleasing. Geoff said he doesn't mind nicks and damages to the leather, as long as the overall product is good. It can be made of lots of straps and things on it without much worry. What matters is that it looks good, fits semi-comfortably, and is thick enough to protect against foam swords (they can actually hit fairly hard, should I get 7-8, 8-9, or 9-10 oz leather?) For reference, Geoff is a pretty big guy; he's about 6' 2" and weighs around 230 lbs. What I seek to learn: What I really need to know now is what kind of leather I should purchase. To cover the pauldrons, sabatons, and breastplate, I hope to spend less than $175 on leather. I'd like to purchase leather that's bleached or white so I can dye it easily to my liking. So, what suggested weight (oz) leather should I grab, what specific type of leather should I grab (rawhide?), and where should I get it? I have a Federal Tax ID #, so I can purchase from wholesale suppliers, but I don't know if I'd be purchasing enough for the venture to be worth it, or if I should just stick with eBay or wherever you guys suggest. I currently have only a catalog from Weaver (thoughts on the company?), and I'm curious where I should go from here. Overall list of questions: Important: What leather weight do I want for making pauldrons, sabatons, and a breastplate? What type of leather do I want for making pauldrons, sabatons, and a breastplate? What amount of leather would I want for making pauldrons, sabatons, and a breastplate? Where should I purchase my leather? What other leather related items should I purchase? Not as important, but still curious: Should I post pictures of my leather progress and various works? Should I post pictures of the mystery rivets? What tools should I get for copper rivets? When is leather adhesive used? When is stitching used in leatherwork? Is stitching the same as sewing (if not, when is sewing used in leatherwork?)? Any ideas on what the mystery rivets were? (Sorry if some questions seem like they can just be googled; I really prefer to ask people because it allows me to respond for clarification.) Thanks much for reading all this. If any parts need clarifying, please let me know! This is a large project for me, and I hope to learn a lot from it!

Hello! So, this is my first post on leatherworker.net, and I have quite a few questions regarding leather weight, purchase inquiries, leather types, and copper rivets. But first, some background... My name is Caracal Keithrafferty, and I'm located right by Milwaukee, WI. I made my first large purchase of leather tools, dyes, and hardware late last summer. The tools I have are: Knives V-Gouge Awl Edge Beveler (Sz. 3) Parallel Stitch Groover 2 Overstitch Wheels (Sz. 5 + 6) Bone Folder Edge Slicker Wood Hammer (I was considering an epoxy or rubber hammer; can't afford a good rawhide one) 2 cutting mats Dyes and liquids (and related items) I have are: Wool Daubers EvoStik Time Bond Contact Adhesive (haven't used it; not really sure when, how, or where one would use it) Carnauba Creme Gum Tragacanth Tan-Kote Neatsfoot Oil (Never used it, not quite sure what it's for) Leather Sheen 8 different dyes Hardware (and related items) I have are: Lots of scrap leather from Hobby Lobby; mostly small pieces. A couple different hammering tools 2 small anvils (one is damaged) O-Rings D-Rings TIny buckles Various rivets *Note: To describe the rivets and other hardware further might be challenging. I know I have some snaps, and I can set those properly. I have many tiny eyelets (the ones that mushroom out; one piece). I have a couple of grommets (2 pieces, brass look to them), but I don't believe I have any of the necessary setting tools. I have some single cap rivets I believe, but they are missing the male end I believe. I used all my copper rivets; even with improper tools, I made use of them (and I plan to purchase many more in the future. Any suggestions on what I'd want?). Aside from those, I have some other ones I'll call mystery rivets... I've got some that are long tubes (7/16 inch or so) that are unthreaded on the inside. I'm not sure how they're used. I've got other ones that look like grommets, but are non-flowering like the eyelets, and have a short shaft. I don't know if they're part of something. There's another kind that seems similar in for to the snaps, but is missing a 4th piece. They are definitely different from the standard ones; one cap has a little piece of metal lifted up, another part has tiny holes and grooves on it, maybe implying that it's supposed to change shape when tooled. Another kind I have are only few in number, but they're flat-bottomed, have a moderate/small sized shaft, and have a tiny hole at the end of the shaft. Lastly, I've got some solid ones that I have no idea how to set. They have long shafts, end in a dome on one end, and about 2/3 of the way down from the dome have a disc solidly on the item. It may be related to a Sam Brown rivet, but I am unsure. I also have several split pins, but I don't know if they're related to leatherworking at all. Those are all the leatherworking related items I have at my disposal currently. I do not know how to sew leather, and I am not quite sure where to start. All the items I've seen sewn so far have been with very thin leather, and I hardly to never work with thin leather. Can anyone suggest some hand tools for me to use? I did some brief research and though about buying, but I have no idea where to start. I cannot afford machinery, but hand tools might work. I have dyed some leather a fair amount, and I've learned how to smooth edges and backs of leather well enough. So, as far as that goes, I have down the technique, just not the perfection. I can hammer rivets well, and I can cut leather just fine. But what I need now is information on leather weight, proper leather types, and other items needed for making basic armor for LARPing. I've got a friend who wants me to make him some armor. It doesn't need to protect much, and he's seeking form over function. I also want to sell at other LARPing conventions. More details on armor: My friend Geoff has commissioned me to make him a set of armor consisting of: pauldrons (shoulder armor) that go from arm-to-arm over the shoulders, covering the arms up to the elbows; greaves (shin armor) that go up to the knees, but don't cover them too much (I have this part mostly done, should I post photos?); sabatons (foot armor) that cover the instep of the foot, and covers the ankle bone on either side; and that largest part being the breastplate (front body armor), which only needs to cover the chest, the belly, part of the sides, the collarbone, and little to none of the lower back. He also told me that a long term project I could do with him would be a plumed helmet. Another one would be a Romanesque skirt. The overall look he's going for would be somewhat similar to a roman soldier with a mix of some medieval aspects. It does not need to be historically correct, just similar in its look. What I'm not worried about is making the whole project aesthetically pleasing. Geoff said he doesn't mind nicks and damages to the leather, as long as the overall product is good. It can be made of lots of straps and things on it without much worry. What matters is that it looks good, fits semi-comfortably, and is thick enough to protect against foam swords (they can actually hit fairly hard, should I get 7-8, 8-9, or 9-10 oz leather?) For reference, Geoff is a pretty big guy; he's about 6' 2" and weighs around 230 lbs. What I seek to learn: What I really need to know now is what kind of leather I should purchase. To cover the pauldrons, sabatons, and breastplate, I hope to spend less than $175 on leather. I'd like to purchase leather that's bleached or white so I can dye it easily to my liking. So, what suggested weight (oz) leather should I grab, what specific type of leather should I grab (rawhide?), and where should I get it? I have a Federal Tax ID #, so I can purchase from wholesale suppliers, but I don't know if I'd be purchasing enough for the venture to be worth it, or if I should just stick with eBay or wherever you guys suggest. I currently have only a catalog from Weaver (thoughts on the company?), and I'm curious where I should go from here. Overall list of questions: Important: What leather weight do I want for making pauldrons, sabatons, and a breastplate? What type of leather do I want for making pauldrons, sabatons, and a breastplate? What amount of leather would I want for making pauldrons, sabatons, and a breastplate? Where should I purchase my leather? What other leather related items should I purchase? Not as important, but still curious: Should I post pictures of my leather progress and various works? Should I post pictures of the mystery rivets? What tools should I get for copper rivets? When is leather adhesive used? When is stitching used in leatherwork? Is stitching the same as sewing (if not, when is sewing used in leatherwork?)? Any ideas on what the mystery rivets were? (Sorry if some questions seem like they can just be googled; I really prefer to ask people because it allows me to respond for clarification.) Thanks much for reading all this. If any parts need clarifying, please let me know! This is a large project for me, and I hope to learn a lot from it!

Greetings yall! First of all I want to say that I'm sorry if I duplicate posts but I simply don't have time to read through all the forums. I'm wondering where is a good place to find quality leather for belts at a good price. I bought some scraps from Tandy (5 lbs of leather strips). Are these any good? I have been waiting for over 2 weeks and it's still not here. Is this typical of Tandy? I appreciate any advice.

Hello all! I'm a very excited new member to the leather worker community. I'm putting together a small production of specialized unique wallets and I'm looking for some quality leather for them. I have found a bunch of great shops, however it seems that most of the best leather gets imported from countries in South America such as Brazil and Argentina. Can anyone point me in the right direction of who to contact down there so that I can look into buying some? I know that they will usually only work with individuals that will buy in bulk and I believe that I will be buying enough to appeas that. Any help will be greatly appreciated!