Members ChipperBags Posted November 1, 2022 Members Report Posted November 1, 2022 Hi everyone! This is the quick Sheath I made with my new Leatherwork. Sorry about the video being sideways, I am going to try and fix that! My first sheath Chip from CHIPPPER BAGS Quote
CFM chuck123wapati Posted November 1, 2022 CFM Report Posted November 1, 2022 i would love to see it but i wont open unknown stuff, can you post a picture or two. Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
Members Gezzer Posted November 1, 2022 Members Report Posted November 1, 2022 Pics would be nice , I am not bad to open stuff either . I suffer from Pandora's box syndrome Quote
CFM tsunkasapa Posted November 1, 2022 CFM Report Posted November 1, 2022 3 hours ago, chuck123wapati said: i would love to see it but i wont open unknown stuff, can you post a picture or two. Quote Hoka Hey! Today, tomorrow, next week, what does it matter?
Members Bawarrior Posted November 3, 2022 Members Report Posted November 3, 2022 No pic no can see, sorry bro Quote
Members ChipperBags Posted November 5, 2022 Author Members Report Posted November 5, 2022 (edited) Yes, I will get a picture today when I go upstairs to the room. Chip p.s. The link is to a YouTube video. Edited November 5, 2022 by ChipperBags Adding pictures Quote
Members ChipperBags Posted November 5, 2022 Author Members Report Posted November 5, 2022 And 2 more Quote
Members Gezzer Posted November 5, 2022 Members Report Posted November 5, 2022 (edited) Looks like might have been a little small or you had planned on 2 rows of stitches . Straighten up the edge and that's not a bad sheath at all . You should have seen some of my early attempts Oh , and thanks for the pics ! Edited November 5, 2022 by Gezzer Quote
Members ChipperBags Posted November 5, 2022 Author Members Report Posted November 5, 2022 THanks, Gezzer! I was so excited to use the new machine, the first seam (outside one) was just to hold it folded over and was SUPPOSED to be cut off. And you are welcome for the pictures! Chip Quote
Members ChipperBags Posted November 5, 2022 Author Members Report Posted November 5, 2022 Another link to the video, which is no longer sideways! https://youtu.be/lVOkxomB7uc Quote
Members ChipperBags Posted November 5, 2022 Author Members Report Posted November 5, 2022 42 minutes ago, Gezzer said: …Straighten up the edge and that's not a bad sheath at all … Would you sand the edge, cut it or a combination of both? Chipper Quote
CFM chuck123wapati Posted November 5, 2022 CFM Report Posted November 5, 2022 21 minutes ago, ChipperBags said: Would you sand the edge, cut it or a combination of both? Chipper great job, yes cut the edges, bevel and /or sand then burnish them. Follow your stitches to make it look nice and even. pull only the stitches out that run off the leather under the other set of stitches, not many will notice the extra holes. Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
Members ChipperBags Posted November 5, 2022 Author Members Report Posted November 5, 2022 44 minutes ago, Gezzer said: What he said . I will do what you said! Great! Thanks! Chip Quote
Members ChipperBags Posted November 6, 2022 Author Members Report Posted November 6, 2022 I did this one as a test of the machine and stitch length. Quote
Members ChipperBags Posted November 6, 2022 Author Members Report Posted November 6, 2022 Other side Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.