CFM chuck123wapati Posted February 5, 2023 CFM Report Posted February 5, 2023 So after searching the globe for a new ball cap and not finding anything i liked i decided to just make one. Pulled a wallymart hat on close out for 4 bucks. Made it into oil cloth first then added the brim and band. It is dyed and finished only with antiquing and super shene, Skived the edges so it doesn't look bulky and sewed it on with my Chinese shoe patcher. I screwed up a few stitches but the patcher didn't, it ran flawlessly. This was the test run for my patcher and my it did great I'll be selling these bad boys they are soooo redneck lol. Quote
Members 327fed Posted February 5, 2023 Members Report Posted February 5, 2023 You have outdone yourself again Chuck. That’s off the hook. Quote
Members Ddat Posted February 5, 2023 Members Report Posted February 5, 2023 That's awesome... Might have to follow suit on my favorite hat Quote
Contributing Member Samalan Posted February 5, 2023 Contributing Member Report Posted February 5, 2023 Nice job Chuck per usual, yup red neck is right but very cool. Quote
CFM chuck123wapati Posted February 5, 2023 Author CFM Report Posted February 5, 2023 1 hour ago, 327fed said: You have outdone yourself again Chuck. That’s off the hook. 22 minutes ago, Ddat said: That's awesome... Might have to follow suit on my favorite hat 17 minutes ago, Samalan said: Nice job Chuck per usual, yup red neck is right but very cool. Thanks guys !! Quote
Contributing Member fredk Posted February 5, 2023 Contributing Member Report Posted February 5, 2023 I really hate wearing ball caps but that one is sooooo good. It just looks the right one for a-goin huntin in Quote
CFM chuck123wapati Posted February 5, 2023 Author CFM Report Posted February 5, 2023 22 minutes ago, fredk said: I really hate wearing ball caps but that one is sooooo good. It just looks the right one for a-goin huntin in Thanks Fred you know i was thinking about your your hat bands and contemplated making the band a bit wider and adding about three 22 cal bullet loops on each side. Quote
Members Bawarrior Posted February 5, 2023 Members Report Posted February 5, 2023 Great job, I like you oak leaves and meandering design. Kinda looks like I might have done it. I like what you did. Keep up to good work. Quote
Members DwightT Posted February 5, 2023 Members Report Posted February 5, 2023 That looks awesome Chuck. Quote
MikeRock Posted February 5, 2023 Report Posted February 5, 2023 Chuck, Make Fred's like a Sherlock Holmes deerstalker with two brims..... :)) Derned fine piece of red necking. Fred, do you have a pipe?? Quote
Contributing Member fredk Posted February 6, 2023 Contributing Member Report Posted February 6, 2023 I have several pipes, but not a meerschaum, and I keep my baccy in an air-tight glass jar Quote
Members bladegrinder Posted February 6, 2023 Members Report Posted February 6, 2023 That's awesome! Quote
Members Gezzer Posted February 6, 2023 Members Report Posted February 6, 2023 Redneck Chic !!!! Quote
Members Handstitched Posted February 6, 2023 Members Report Posted February 6, 2023 Well done on that friend ' If you can't buy it, make it ' HS Quote
Members PastorBob Posted February 6, 2023 Members Report Posted February 6, 2023 Great tooling work on that! Does it make the bill much heavier where it wants to ride down while wearing? Quote
CFM chuck123wapati Posted February 6, 2023 Author CFM Report Posted February 6, 2023 16 hours ago, Bawarrior said: Great job, I like you oak leaves and meandering design. Kinda looks like I might have done it. I like what you did. Keep up to good work. thanks!! your work does inspire folks lol. Quote
CFM chuck123wapati Posted February 6, 2023 Author CFM Report Posted February 6, 2023 1 hour ago, PastorBob said: Great tooling work on that! Does it make the bill much heavier where it wants to ride down while wearing? Thanks no it doesn't i thought it would but its not noticeable at all. 11 hours ago, Handstitched said: Well done on that friend ' If you can't buy it, make it ' HS lol that comes from living in Wyoming to long. Quote
CFM chuck123wapati Posted February 6, 2023 Author CFM Report Posted February 6, 2023 15 hours ago, DwightT said: That looks awesome Chuck. thanks!! Quote
CFM chuck123wapati Posted February 6, 2023 Author CFM Report Posted February 6, 2023 14 hours ago, MikeRock said: Chuck, Make Fred's like a Sherlock Holmes deerstalker with two brims..... :)) Derned fine piece of red necking. Fred, do you have a pipe?? lol that would be awesome but what motif? i know redneck, 13 hours ago, bladegrinder said: That's awesome! 1 hour ago, kgg said: Nicely done. kgg 12 hours ago, Gezzer said: Redneck Chic !!!! thanks guys!! Quote
Members DaveP Posted February 6, 2023 Members Report Posted February 6, 2023 That's very cool! Great job on the tooling! Quote
CFM chuck123wapati Posted February 6, 2023 Author CFM Report Posted February 6, 2023 9 minutes ago, MikeRock said: Redneck, of course! lol i could do redneck on one and English gent on the other that way you could just turn it around depending on which pub or bar you were in . 17 minutes ago, DaveP said: That's very cool! Great job on the tooling! thank you!! Quote
Contributing Member fredk Posted February 6, 2023 Contributing Member Report Posted February 6, 2023 What defines 'redneck' and what defines 'English Gent' ? I'm pretty bad at dropping people or cultures in to definitions that are sort-of not very definitive I'm not being silly, just stoopid I mean 'viking', 'eskimo', 'native American' I can get but some others ?? Its the same with music - what goes into what style? I dunno with most Quote
kgg Posted February 6, 2023 Report Posted February 6, 2023 (edited) 4 hours ago, MikeRock said: Redneck, of course! Nice hat I guess for those that don't know if they are coming or going. kgg Edited February 6, 2023 by kgg Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.