Juki LU 562

[Wizcrafts]

1 hour ago, Tejas said:

I don't have an original copy. However, the Keysew copy is quite legible. Send me a PM and I'll print and send you a copy -- no reimbursement.

I wonder how much postage will be for a large hard envelope of printouts mailed to Costa Rica? That's where Fifi6464 is located, based on their IP address.

[brmax]

Should be cheaper because I thought it was near Greece

[mikesc]

Floria ( city ) is in Erbil ..Kurdistan.

Maybe Fifi6464 is running through a proxy ?

 

I tend to agree with something dikman said in another thread, it would make much more sense, and be much more helpful, if both the city and country fields in the member "profile" were compulsory / mandatory..should be easy enough to tweak the CMS to do that.

PDF is 15 sheets..so about 5-10 dollars to send by slow mail to almost anywhere, from almost anywhere.

Edited October 1, 2016 by mikesc

[Tejas]

Folks following this link because of interest in the Juki LU-562 or 563 might also be interested in chapter 4 -- Sewing Machine Repair -- of the following link, which states.

Your shop may have the Consew Model 225, the Juki LU-562, or the Singer Model 111 W 155 sewing machine. These three sewing machines are essentially identical, and all specifications and instructions are the same for all three sewing machines.

http://militarynewbie.com/wp-content/uploads/2013/11/NAVEDTRA-14217-Aircrew-Survival-Equipmentman-1-C.pdf

[dikman]

 Good link, Tejas, excellent section on the 111W155 (and clones). I might print that out for reference.

[Firestar1485]

LU-562 v LU-563 ... anyone know if you can increase the bobbin capacity in the 562 by switching the full sewing hook assembly from the 562 with one from a 563?

[shoepatcher]

You can but it also requires a different take up lever and some other adjustments.   Not a quick change.

glenn

[CowboyBob]

The larger hook is also taller so it requires a mill because the top of the hook saddle needs to be milled.