Jump to content

Recommended Posts

  • Members
Posted

Ok I am brand new at this, I saw online where many people use rubber cement as a temporary binder to hold things still till it is sewn. I do not like the smell but I may be able to handle it

Then comes the Barges in a blue tube.

WOW no matter the ventilation if I smell it once I have a headache for an hour. Even after it dries for hours if I go near it I get a headache.

What are  good replacements for them that have much less smell?

I was just using some Gorilla glue jell. I only used very little but I did not smell it at all!

Will that be as good for a permanent option as the Barges?

What can replace the rubber cement?

Thanks Sled.

 

Remember, Whether you think you can, or think you can't. You're Right!

Tell me and I forget. Show me and I remember. Involve me and I understand.

It is in the religion of ignorance that tyranny begins
 

  • Replies 33
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

  • Members
Posted
26 minutes ago, Instinctive said:

Go to Home Depot or other hardware store and get a bottle of Lepage Pres-Tite Green Contact Cement. No detectable odor and holds.

Does it stay flexible?

The Gorilla certainly did not.

 

Sled

Remember, Whether you think you can, or think you can't. You're Right!

Tell me and I forget. Show me and I remember. Involve me and I understand.

It is in the religion of ignorance that tyranny begins
 

  • Members
Posted (edited)

I would recommend Renias waterbased glue.

My two recommendations (What suits your needs best.)

 

Renia Aquilim 315 = Instant and permanent bond. But requires that you sand if you glue flesh to grain. Just put glue on one of the pieces and assemble and press/hammer and you have a good bond. If you glue lets say flesh to sanded grain, then put glue on the sanded grain. I did a test a couple of days ago. I glued two pieces of vegetable tanned leather together, and after dried i put it in water for 15 minutes. The bond was perfect even though the leather was dripping wet.

Renia Aquilim SG = Instant bond on almost everything, i glue my paddings to my granite plate with this (for easier shaping) But this bond is a temporary bond and is possible to remove, so only use this if you are stitching.

Aquilim 315: 

 

Aquilim SG:

 

Edited by Danne
Posted

Eric, unrelated, but your link to wordpress comes up blank. 

So much leather...so little time.

 

  • Members
Posted
4 minutes ago, alpha2 said:

Eric, unrelated, but your link to wordpress comes up blank. 

Unrelated but valuable information. Thanks for picking that up. Wordpress can be a little finicky with links, dependin on the site.

All fixed now.

Eric Fisher

Fisher Custom Leather

"A Retirement Project"

https://fishercustomleather.wordpress.com/

Posted

Now THAT'S what I was looking for ! Thanks, Eric!

Working on a retirement project of my own. (8 working days left...)

Jeff

So much leather...so little time.

 

  • Members
Posted

Thanks guys, I will give these a shot.

 

Sled

Remember, Whether you think you can, or think you can't. You're Right!

Tell me and I forget. Show me and I remember. Involve me and I understand.

It is in the religion of ignorance that tyranny begins
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...