Members Mokerson Posted February 13, 2018 Author Members Report Posted February 13, 2018 6 hours ago, Webicons said: I can’t really speak to the quality of Vergez Blanchard tools but a new crop of companies from Asia are really changing the game. To name a few: KS Blades: for stitching chisels and punches Feng Tools: for edgers Nash Anonymous: for awls Nobuyoshi: for Japanese skiving knives Wuta: for creasing irons and stitching chisels I highly recommend any of these for their performance, fit and finish and many of them are cheaper than their Blanchard counterpart. Webicons, thanks for the list. It is a great starting point for folks like me. Any idea where to find info on Feng and Nash Anonymous? Quote
alpha2 Posted February 14, 2018 Report Posted February 14, 2018 1 hour ago, YinTx said: This happen to you? What brand did that to you? YinTx It was brand T. I just started punching a hole and cutting out the leather between the holes. Not happy with that method though. It's fraught with peril...one little slip and it is trash. Quote So much leather...so little time.
Members Webicons Posted February 14, 2018 Members Report Posted February 14, 2018 2 hours ago, Mokerson said: Webicons, thanks for the list. It is a great starting point for folks like me. Any idea where to find info on Feng and Nash Anonymous? They both can be found and contacted through Instagram: Feng Tools https://www.instagram.com/feng_tools Nash Anonymous https://www.instagram.com/nash_anonymous Note: Feng offers two different types of steel for his edgers XW42 and M390. The upcharge for the M390 is worth it. I use it several times a week for six months and only recently needed to sharpen them (and edgers are a PITA to sharpen). Nash offers fully customizable awls and knives. I ordered a special awl with a longer stickout. No issues and charged the same price. They are laser sharp. Goes through 10oz veg tan like butter. Quote
Members Mokerson Posted February 14, 2018 Author Members Report Posted February 14, 2018 3 minutes ago, Webicons said: They both can be found and contacted through Instagram: Feng Tools https://www.instagram.com/feng_tools Nash Anonymous https://www.instagram.com/nash_anonymous Note: Feng offers two different types of steel for his edgers XW42 and M390. The upcharge for the M390 is worth it. I use it several times a week for six months and only recently needed to sharpen them (and edgers are a PITA to sharpen). Nash offers fully customizable awls and knives. I ordered a special awl with a longer stickout. No issues and charged the same price. They are laser sharp. Goes through 10oz veg tan like butter. Ugh... not social media, what happened to the good old days where everyone had a website? Appreciate the info, I'll check them out for sure. Quote
Members Webicons Posted February 14, 2018 Members Report Posted February 14, 2018 (edited) Here are a few of my favorite things (from Asia): Nobuyoshi skiving knives/plane (Japan) Note: they are not much to look at but the Aogami Super steel is top notch and will hold an edge like no other. Feng edgers (China) Wuta creasers (China) Nash Anonymous awl (Hong Kong) KSBlades stitching chisels (Korea) Edited February 14, 2018 by Webicons Quote
bikermutt07 Posted February 14, 2018 Report Posted February 14, 2018 41 minutes ago, Webicons said: Here are a few of my favorite things (from Asia): Nobuyoshi skiving knives/plane (Japan) Note: they are not much to look at but the Aogami Super steel is top notch and will hold an edge like no other. Feng edgers (China) Wuta creasers (China) Nash Anonymous awl (Hong Kong) KSBlades stitching chisels (Korea) I haven't ordered the creasers yet. You're pretty happy with them? Quote I'm not paying 80 bucks for a belt!!! It's a strip of leather. How hard could it be? 4 years and 3 grand later.... I have a belt I can finally live with. Stitching is like gravy, it's only great if you make it every day. From Texas but in Bossier City, Louisiana.
Members Webicons Posted February 14, 2018 Members Report Posted February 14, 2018 8 hours ago, bikermutt07 said: I haven't ordered the creasers yet. You're pretty happy with them? Hey Mutt - Yes. Very happy with them. It took a while to get used to them, especially around tight corners but love them now. I have the 1.5 and 2.0 spaced versions and they do the trick for 95% of what I do. They’re comfortable and hold the heat well. It seems that Wuta changes their pricing according to the venue so look around. You can get free shipping on a lot of their tools but it takes 20 days+. I always opt for expedited shipping which is about 7 days but cost around 18 bucks. Quote
Members Tugadude Posted March 23, 2018 Members Report Posted March 23, 2018 On February 13, 2018 at 11:15 AM, Mokerson said: So... I've been buying VB tools for a few months now, as I need something I will order it and so far I have had no complaints. They have been solid, the finish has been an improvement over the stuff I have been using and I have had no complaints. I have mostly picked up cutting tools, hammers and dividers so far, and I have felt they were a good product for the price I paid. I just got in some edge bevelers though and I have to admit (still being a noob to leather work I don't have an extensive point of reference relating to the various tool mfrs.) when I unpacked them I was sure that they had sent me the wrong product. The fit and finish on these tools are really lacking! While I don't know if the comparable Tandy tools cut better or worse, they certainly look like they were better made and assembled. There is no consistency in the location of the groove on the bevelers, none of them are in the center of the tool, there are huge grooves and gouges from the making process with little attempt made to clean them up and make them into a presentable, finished tool. The ferules have burr's on them and just generally do not look like they came from the same place the rest of the VB tools I have. Is this normal for VB? I was considering ordering a set of oblong punches from them as well, but after seeing how they treated the steel on the bevelers I am expecting a very similar approach to a set of these punches. I am ordering a set of Montana bevelers to replace the VB ones I just got, but any advice or insight into the oblong punches would be appreciated. Like most here I suspect, I am a bit of a tool collector but in the end the tool needs to perform the job well, and how it looks is of little importance to how it performs, but for the price I would like to think that they can produce a tool that looks finished AND does the job it was made for. This said if I am missing the mark here due to inexperience please let me know, if not would love to hear of any mfrs, foreign or domestic, that produce quality oblong punches. Have done a few searches on the punches and haven't found much, I see Weavers name mentioned but no first hand endorsement or dings on their product. Thanks in advance. Did you try offering feedback to VB? Tell them of your displeasure? Quote
Members hectorroo Posted February 1, 2019 Members Report Posted February 1, 2019 Hi all, just wanted to say when I first started out in leather work, my first little research had me looking at VB. On the way back from a wedding in Spain to the UK, we stopped in the VB factory (wanted to get a few things ) and the offered to let us have a good look around. Heres a few pics from the factory. The guy with the yellow trousers was using a very large grinding wheel to do the initial sharpen the head knives. There was a second room that I didn't get photos in, where others were finishing the tools. We also had a chance to watch the pricing irons being made (there all made by the same person for many many years, or that was what we were told.). Each tooth is individually hand cut and polished. Since then I have bought more tools from Asia, and there are very nice. Still watching a little old French man slowly making tools shows the passion these guys still have for hand made tools. Quote
Members chrisash Posted February 1, 2019 Members Report Posted February 1, 2019 Some people talk about old knifes as a wonder tool, made by someone 20-50 maybe 100 years ago and holds its edge like no new tool ever can, but fail to see the improvements in steel every year to provide the sharpest long holding its edge modern steels The pictures above may well have been taken 50 years ago rather than this year, no sign of modern machinery that give that little bit extra in accuracy and repeatability that the new companies use I think to many companies live on their old reputations or a nice bit of fancy handle colouring or shape and charge silly money, the old ways are not always the best ways Quote Mi omputer is ot ood at speeling , it's not me
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.