Jump to content

Recommended Posts

  • Members
Posted

That was an option I considered but the doors were designed to have the strength of the OSB to keep them square. the additional weight of the glass would have caused other issues with hinges etc.

I only intend using the workshop with the doors open and as it is in my garden there is no access from anywhere but my house :)

Thanks for the input.

I have recently started my own blog to share more detail of my projects



http://my63leather.wordpress.com




  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

Posted

You'll have to be careful, mate, it'll be better than the neighbors houses, they'll move in :P

No longer following it.

 

  • Members
Posted
On 2/19/2019 at 8:05 PM, Buzzard2005 said:

Looks good :)

What are you going to put on the roof? It looks to be about a 2:12 or a 3:12 slope, you may have an issue with ice if you use a regular shingle. I work in a roofing supply store, in the sheet metal shop, we get a lot of people with ice damage on the sheds that have used a 3 tab shingle.

Yup, that was my first thought, too. "That guy obviously does NOT live somewhere where they get serious snowfalls!" 

I used to live in a house that didn't have enough slope to the roof. I spent a LOT of money fixing it up when I moved in to make it waterproof. The roofers installed a special membrane to resist leakage, as well as the regular roofing tarpaper that goes under the shingles. The third winter I was there, we had an ice storm that deposited about 4 inches of ice on the roof. When that started to melt in the spring, the water leaked right through my living room ceiling! I loaned a friend a pickaxe, crossed my fingers that she wouldn't get carried away with it, and together we spent over an hour removing the ice. Less than an hour later the leak stopped. 

Posted

I would recommend you install a metal roof, it will be a little more expense but faster to install. The rain will run off easier and with such a low roof profile any snow will have an easier time sliding or snow raking it off. You will find that it will be warmer in the winter and cooler in the summer particularly with the air gap of the 2x4 strapping. Here your 25 year (haha) shingles last about 6 to 8 years with serious deterioration starting around year 3 to 4. A lot or all of the shingles have become ECO friendly, less or no real tar, and wind up in the landfill quicker.  

kgg

Juki DNU - 1541S, Juki DU - 1181N, Singer 29K - 71(1949), Chinese Patcher (Tinkers Delight), Warlock TSC-441, Techsew 2750 Pro, Consew DCS-S4 Skiver

Posted
42 minutes ago, kgg said:

I would recommend you install a metal roof, it will be a little more expense but faster to install. The rain will run off easier and with such a low roof profile any snow will have an easier time sliding or snow raking it off. You will find that it will be warmer in the winter and cooler in the summer particularly with the air gap of the 2x4 strapping. Here your 25 year (haha) shingles last about 6 to 8 years with serious deterioration starting around year 3 to 4. A lot or all of the shingles have become ECO friendly, less or no real tar, and wind up in the landfill quicker.  

kgg

Having lived overseas, I would agree that is what's needed in Ontario...

Unless global warming has sped up big time, this should not really be an issue for us Brits.

...at least, I hope its not... :(

No longer following it.

 

  • Members
Posted

I have to be honest this is my first large construction project I have erected kit sheds in the past. I had planned on buying a workshop but they were out of my price range.

I found this site the wood haven 2 by accident and over a year of reading and thinking I began to think I might be able to build my own.

 http://www.thewoodhaven2.co.uk/viewtopic.php?f=35&t=198

The members have been very helpful MikeG is an architect and has helped an approved the plans so I am confident it will stand up to the rigours of English weather.

All of my research regarding the height of work benches will be used in the next stages when I move to the interior. 

I have recently started my own blog to share more detail of my projects



http://my63leather.wordpress.com




  • Members
Posted (edited)

More progress from the last few days.

46758386334_1d4e2a8681_z.jpg2019-03-27_09-39-41 by my0771, on Flickr

Window wall complete actually at this point all walls except the front were clad.

46760853684_6e46d5d2fb_z.jpg2019-03-28_07-11-00 by my0771, on Flickr

The front was a little more of a challenge having the sides and the top as well as the doors.

2019-03-28_07-11-00 by my0771, on Flickr

47434580892_b2c982b1d7_z.jpg2019-03-28_06-04-10 by my0771, on Flickr

Almost there this was where the timber finished fortunately I had ordered more.

40532610753_f0a310131f_z.jpg2019-03-30_11-34-48 by my0771, on Flickr

Complete :) I am really pleased with the result not perfect but good enough.

 

Edited by MY63

I have recently started my own blog to share more detail of my projects



http://my63leather.wordpress.com




Posted
On ‎3‎/‎31‎/‎2019 at 2:44 AM, MY63 said:

I am really pleased with the result not perfect but good enough.

Looks pretty darned close to perfect from what I see. You have done a great job.

Kindest regards

Brian

 

"Whether you think you can or whether you think you can't, you are right"  Henry Ford

Machines: Singer 201p, Kennedy,  Singer 31K20, Singer 66K16 ("boat anchor" condition), Protex TY8B Cylinder Arm (Consew 227r copy), Unbranded Walking Foot (Sailrite LSV-1 copy)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...