AzShooter Report post Posted October 13, 2020 Sunday I shot a Steel Challenge Match from my wheelchair. I like having my gun in a holster instead of bagging it between stages. Before we got started three people asked me why I didn't mount it to the wheelchair. I started to think about it and came up with an idea. I take off the right side elbow rest so that it doesn't interfere with my draw. So, I wanted to set up something using a piece of pipe in the mounting hole for the rest. I went to Lowes and didn't find anything or any help. I then went to Ace, you know, the place with the helpful hardware man, and ran into a friend that suggested what to do. The salesman helped me find everything and I had the parts needed in about 10 minutes. I'm was going to use the above holster, I actually did make it ready for the chair by replacing the belt loop with a modified piece of leather and a wooden dowel. Metal and PVC did not fit the hole. I also decided to make a new holster for it with basket weave and a slightly raked angle. I'll post a pic by Wednesday when it should be finished. I'm waiting for the dye to dry over night before assembling it. The attachment I made for my previous holster works great, giving me more room and not having the grip wear on the wheel when moving. Quote Share this post Link to post Share on other sites
Dwight Report post Posted October 13, 2020 Looking fwd to the picture. May God bless, Dwight Quote Share this post Link to post Share on other sites
AzShooter Report post Posted October 13, 2020 Got it finished faster than I thought. I used a dowel for the mount because that's all I could get at the time to make it work. I'm going to change that out for conduit. I think that would be stronger. Quote Share this post Link to post Share on other sites
Dwight Report post Posted October 13, 2020 Looks good partner . . . is that 1/2 inch or 3/4 inch wooden dowel you used??? And how long is it?? May God bless, Dwight Quote Share this post Link to post Share on other sites
1961Mike Report post Posted October 14, 2020 Hi Looks good. I haven't shot Steel Challenge, do you have to draw from the holster? Just don't forget that's there at Walmart or does that matter at all in Arizona? Not a big deal here in Oklahoma. Later Quote Share this post Link to post Share on other sites
AzShooter Report post Posted October 14, 2020 23 hours ago, Dwight said: Looks good partner . . . is that 1/2 inch or 3/4 inch wooden dowel you used??? And how long is it?? May God bless, Dwight It's 1/2 inch. It's about 6 inches long. I need to cut it down to 4. It's a little long. 3 hours ago, 1961Mike said: Hi Looks good. I haven't shot Steel Challenge, do you have to draw from the holster? Just don't forget that's there at Walmart or does that matter at all in Arizona? Not a big deal here in Oklahoma. Later Steel Challenge is shot from the draw, Surrender Start. I'm shooting rimfire and you do not need to draw it. All starts are from a low ready position. Arizona is an Open Carry state. Quote Share this post Link to post Share on other sites
Frodo Report post Posted October 14, 2020 I extended the handles on my wifes wheelchair I found that 1/2'' emt found here would fit inside the wheel chair tubing The fit is so close that if you have a burr or ding on the end of your pipe it will not slip inside the tubing so after you cut your pipe, use a file to smooth the edge Quote Share this post Link to post Share on other sites
dikman Report post Posted October 14, 2020 Nice solution. I like the colour on the first holster. Quote Share this post Link to post Share on other sites
chiefjason Report post Posted October 15, 2020 I like it! Quote Share this post Link to post Share on other sites