CFM chuck123wapati Posted July 10, 2021 CFM Report Posted July 10, 2021 12 hours ago, DJole said: That is true. But I only wanted a light impression to guide the swivel knife cuts. its a great idea very easy and simple. Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
Members DJole Posted July 11, 2021 Author Members Report Posted July 11, 2021 11 hours ago, chuck123wapati said: its a great idea very easy and simple. It just takes time and patience to cut all the fiddly bits out carefully. I'd LOVE to have the time/tools to make a 3-d printing, as others point out above, but this was dirt cheap, and available in about 15 minutes. Quote \D. Jole \ --> <http://djole.altervista.org/djole/Publications/Leather/Lindex.htm>
CFM chuck123wapati Posted July 11, 2021 CFM Report Posted July 11, 2021 6 hours ago, DJole said: It just takes time and patience to cut all the fiddly bits out carefully. I'd LOVE to have the time/tools to make a 3-d printing, as others point out above, but this was dirt cheap, and available in about 15 minutes. No more than cutting out a regular pattern. I have spent most of my whole working career over 30 years learning computer technology all the way from dos and a floppy disc to cad drawing, i have had enough of that crap. Learn, update, relearn, update, oops now its obsolete, spend more money, relearn ,update blah blah blah etc not for me any more i do leather because its fun and relaxing. If i wanted to learn another program it wouldn't be for building more plastic junk to throw in the dumps. Anyway enough of my tech rant I bet you could also make them out of wood ,similar to the stamps they use for printing on cloth or paper. Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
kgg Posted July 11, 2021 Report Posted July 11, 2021 On 7/9/2021 at 5:17 AM, DJole said: So, I came up with this idea to make a light stamp: I think this is very ingenious, a true "KISS" solution. Yes, this could be done on a 3d printer or laser but I like the simplicity of your solution. Even through I have multi 3d printers, which I dearly enjoy using, your solution for a one of or so is a good practical low cost solution that anyone could do. Not everyone wants to invest the time, money, effort or can afford the investment into more complicated solutions. kgg Quote Juki DNU - 1541S, Juki DU - 1181N, Singer 29K - 71(1949), Chinese Patcher (Tinkers Delight), Warlock TSC-441, Techsew 2750 Pro, Consew DCS-S4 Skiver
Members spacedog Posted July 11, 2021 Members Report Posted July 11, 2021 8 hours ago, kgg said: I think this is very ingenious, a true "KISS" solution. Yes, this could be done on a 3d printer or laser but I like the simplicity of your solution. Even through I have multi 3d printers, which I dearly enjoy using, your solution for a one of or so is a good practical low cost solution that anyone could do. Not everyone wants to invest the time, money, effort or can afford the investment into more complicated solutions. kgg Exactly what I was thinking. Neat idea. 16 hours ago, DJole said: It just takes time and patience to cut all the fiddly bits out carefully. I'd LOVE to have the time/tools to make a 3-d printing, as others point out above, but this was dirt cheap, and available in about 15 minutes. I feel the same. 3D print stamps would be cool, but this is something I can do with a limited budget and technical know how. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.