Jump to content
Sign in to follow this  

Recommended Posts

Share this post


Link to post
Share on other sites

i like that design friend.

Share this post


Link to post
Share on other sites

Very fine example.  Looks like a nice project.  

Share this post


Link to post
Share on other sites

I made a few more ,I am getting into this little air brush.

 

Wanna see something really dumb.  take a look at the cut mark across that panel. YEP. I did that. It was laying under another piece when I cut it. OPPS.  I either make another panel or move my phone into that case, 

 

IMG_1305.JPG.73d31d17a6994f28aae7646a9d2cbcc6.JPG

 

 

Share this post


Link to post
Share on other sites

Aww... it happens.  But the dragon scales on the red looks very eye catching and beats the crap out of my 'basket weave' stamp!  ha! 

 

Share this post


Link to post
Share on other sites

oh man that stinks! I have a nice wallet with a big dye stain right in the middle of it. Or sew up the cut with something weird, add a few old clock parts and call it diesel punk. 

Share this post


Link to post
Share on other sites

Its been a while since I done that

My usual, sometimes too bluddy often, mistake is to take what I think is a waste off-cut and think 'That piece will do nicely for this, it just needs cutting down to shape'  then after its been cut down, its 'Oh Sh*t'  as I realise that piece was a cut piece for an on-going stalled project. And invariably it was the last good piece available for the stalled project.

No repair. You'll not be happy or content until you remake & replace that slashed panel. And it'll be one of the bestest panels you'll ever do! :P

Share this post


Link to post
Share on other sites

Nice, the stamping is great. Have wanted to try airbrushing, you are giving that nudge to try.

Share this post


Link to post
Share on other sites
12 hours ago, fredk said:

'That piece will do nicely for this, it just needs cutting down to shape'  then after its been cut down, its 'Oh Sh*t'  as I realise that piece was a cut piece for an on-going stalled project

LOL!  happened to me, too, the other night.  Face planted my forehead on my marble slab.....sheesh... So, with last nights project I started to label the flesh side of the project with the part name.   

Edited by JayEhl

Share this post


Link to post
Share on other sites

Very nice. I didn’t know you could air brush leather, but I am a newb here.

 

Share this post


Link to post
Share on other sites
9 hours ago, new west said:

Very nice. I didn’t know you could air brush leather, but I am a newb here.

 

you can get a cheapy from wally world for around $35. do yourself a favor and buy a respirator also, the fumes will get cha

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...