CFM chuck123wapati Posted July 13, 2021 CFM Report Posted July 13, 2021 i like that design friend. Quote
Members AzShooter Posted July 14, 2021 Members Report Posted July 14, 2021 Very fine example. Looks like a nice project. Quote
CFM Frodo Posted July 19, 2021 Author CFM Report Posted July 19, 2021 I made a few more ,I am getting into this little air brush. Wanna see something really dumb. take a look at the cut mark across that panel. YEP. I did that. It was laying under another piece when I cut it. OPPS. I either make another panel or move my phone into that case, Quote
Members JayEhl Posted July 19, 2021 Members Report Posted July 19, 2021 Aww... it happens. But the dragon scales on the red looks very eye catching and beats the crap out of my 'basket weave' stamp! ha! Quote
CFM chuck123wapati Posted July 19, 2021 CFM Report Posted July 19, 2021 oh man that stinks! I have a nice wallet with a big dye stain right in the middle of it. Or sew up the cut with something weird, add a few old clock parts and call it diesel punk. Quote
Contributing Member fredk Posted July 20, 2021 Contributing Member Report Posted July 20, 2021 Its been a while since I done that My usual, sometimes too bluddy often, mistake is to take what I think is a waste off-cut and think 'That piece will do nicely for this, it just needs cutting down to shape' then after its been cut down, its 'Oh Sh*t' as I realise that piece was a cut piece for an on-going stalled project. And invariably it was the last good piece available for the stalled project. No repair. You'll not be happy or content until you remake & replace that slashed panel. And it'll be one of the bestest panels you'll ever do! Quote
Members WalterF Posted July 20, 2021 Members Report Posted July 20, 2021 Nice, the stamping is great. Have wanted to try airbrushing, you are giving that nudge to try. Quote
Members JayEhl Posted July 20, 2021 Members Report Posted July 20, 2021 (edited) 12 hours ago, fredk said: 'That piece will do nicely for this, it just needs cutting down to shape' then after its been cut down, its 'Oh Sh*t' as I realise that piece was a cut piece for an on-going stalled project LOL! happened to me, too, the other night. Face planted my forehead on my marble slab.....sheesh... So, with last nights project I started to label the flesh side of the project with the part name. Edited July 20, 2021 by JayEhl Quote
Members new west Posted October 25, 2021 Members Report Posted October 25, 2021 Very nice. I didn’t know you could air brush leather, but I am a newb here. Quote
CFM Frodo Posted October 26, 2021 Author CFM Report Posted October 26, 2021 9 hours ago, new west said: Very nice. I didn’t know you could air brush leather, but I am a newb here. you can get a cheapy from wally world for around $35. do yourself a favor and buy a respirator also, the fumes will get cha Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.