Members Squilchuck Posted August 26, 2021 Members Report Posted August 26, 2021 (edited) A client has a saddle with a Cheyenne roll that is broken on the right third of length. It looks good until you pick up the saddle w the roll. Seat leather, or at least the padded seat cover, is intact. Its broken, separated, at the fold. Other than rebuilding the roll is there a quick fix? I thought putting a bead of Liquid Nails into the broken fold might stabilize it at something less than full strength. Got any better ideas, or think the glue wont work? -John Edited August 26, 2021 by Squilchuck Quote
Members oltoot Posted August 26, 2021 Members Report Posted August 26, 2021 hard to visualize. If there were a filler in there (attached to the tree) and a join in that is separated, at any rate, glue just sounds like a 'hail Mary'. Quote
Members Hasbeencowboy Posted August 26, 2021 Members Report Posted August 26, 2021 If baling wire won't fix it, it is beyond repair........LOL Quote
CFM tsunkasapa Posted August 26, 2021 CFM Report Posted August 26, 2021 36 minutes ago, Hasbeencowboy said: If baling wire won't fix it, it is beyond repair........LOL Quote
Members Goldshot Ron Posted August 26, 2021 Members Report Posted August 26, 2021 It sounds like to me that the saddle was made using cardboard as a filler and not leather. I have worked on saddles that had the same problem, but the owner was willing to pay to have the padded seat replaced, and at the same time I repaired the problem. I agree with Ole Toot, glue won't do much. Quote
Members Cattledude Posted August 28, 2021 Members Report Posted August 28, 2021 If you can't fix it with baling wire or duct tape, you have an electrical problem... Quote
Members Squilchuck Posted August 29, 2021 Author Members Report Posted August 29, 2021 Thanks for the help. John Quote
Members Sheilajeanne Posted August 29, 2021 Members Report Posted August 29, 2021 You guys are HILARIOUS!! Yeah, my late engineer husband would agree... if duct tape, wire or WD40 won't fix it yer screwed! Quote
Members Hasbeencowboy Posted August 29, 2021 Members Report Posted August 29, 2021 and by all means, don't forget super glue. I do hope you get some help with your problem Squilchuck Quote
Members YinTx Posted August 29, 2021 Members Report Posted August 29, 2021 On 8/28/2021 at 9:20 AM, Cattledude said: If you can't fix it with baling wire or duct tape, you have an electrical problem... I thought that is how you fixed electrical problems... YinTx Quote
Contributing Member fredk Posted August 29, 2021 Contributing Member Report Posted August 29, 2021 and don't forget cable ties and chewing gum, and raw eggs Stopped a leaky radiator in friend's vintage car during a rally by putting a raw egg into it. When the egg cooked it blocked up the hole. Only a temp fix though, and it eventually stinks 48 minutes ago, YinTx said: I thought that is how you fixed electrical problems... naa, a nail or a bit of aluminum foil and some paper masking tape Quote
MikeRock Posted August 30, 2021 Report Posted August 30, 2021 Nothing speaks of poor workmanship like wrinkles in your duct tape!! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.