All Activity

Same difference, I remember my late maternal grandfather, a blacksmith, rant on about the inferior electrical arc welding replacing hot rivets in rail car manufacture and that they were "weak". I dared point out to him that the liberty ships were welded together, once... That being said, I have seen many ugly leather pieces with large holes punched and overly thick and garishly colored threads used. These makers also tend to be vocal about how inferior machine stitching is. YMMV

Finally purchased one of Barry Kings Line24 snap setters. How did I not know about this 10 years ago! I have destroyed so many snaps in the last 10 years... I won't say it's impossible to destroy the snap using the Barry King tool, but it's gonna be a lot more difficult. Pretty cool being able to set a snap with a single thwack with. my mallet. Definitely worth the $30 if you set a lot of snaps. https://www.barrykingtools.com/product-page/snap-setter

I am looking to buy a machine to sew leather binding on some German weave carpet on a truck I am working on. I also plan to use it for some other auto ulpulstery (leather headliner, seat, etc). I also wouldnt mind doing somw leather work. I have never used a sewing machine so I will be learning from ground zero. I did some research and the Juki 1541s looks like a great machine. What do you guys think?

Totally Agree. The next project is going to be a small spray enclosure with exhaust for the house. Glad it helped kgg

Thank you for the link. Helped me find it in Amazon for the US.

My first laser engraver (of 3) came from a wonderful friend on here whom I'll leave nameless so people don't bug him for one or other stuff. He offered me a 3000 Mw machine for 50 bucks plus shipping. I love that little rascal. I also have a 10 watt . . . and another one is somewhere in the "in transit" stage. I have no problems with the 10 watt . . . cutting anything leather I want . . . and I even cut 1/4 or 3/16 plywood with it . . . engrave the plywood and do all sorts of funky stuff. I use an air assist which makes the edges look like they were cut with a super duper sharp but hot knife. One of my favorite things to do with it is cut out left over leather scraps for key fobs. It cuts the fob . . . pops the holes for the rivet . . . in two passes. I could do it in one . . . but backing off on the power conserves the life of my laser head and makes for a slightly better looking product. If I'm adding a name or logo or something . . . I do it first . . . then do the cut out. Logo and cut out are in the 3 minute category from blank hunk of leather in my hand . . . to the finished product in my hand. My 2 present machines sit on a 10 dollar second hand door about 24 inches wide and 6 ft long . . . 1 by 12's form the sides . . . and some of the top . . . plexiglass windows cover each machine . . . a fan is on one end pulling out the fumes . . . to a dryer vent hole in the side of my shop that leads outside . . . at the other end of the box is a hole slightly larger than the fan hole. There is no stink in my shop. I don't have my phone or I'd pop the pictures up here. I only have this one of the setp showing it from the end where the hole is. It is covered by the square of plywood with the drawer handle . . . and you can see the two machines inside. Basic corrugated cardboard it a good medium for practice to check your settings. I'll then do a cut out of one of the important areas of the burn . . . run it thru the machine on a piece of scrap . . . adjust as needed . . . an run it. All in all . . . laser engraving is not as easy as falling off a cliff . . . but each person has to learn on their own. One machine . . . using one piece of leather . . . and one program . . . will produce different results than whatever part of that equation changes. May God bless, Dwight

Thats pretty cool

Use your laser and mark the flesh side of the leather, easy peasy, no need for a template.

I use Lightburn extensively, not only to drive my lasers but as my premier pattern design tool. I don't use or recommend any Adobe tools. For CNC milling and 3D printing Fusion is my product of choice.

A basic laser can be relatively inexpensive but it is but a subset of what is required, IMHO. I use different lasers for various tasks in my workshop but I rarely burn images or text directly into leather for decoration as it degrades it too much for the items I make. YMMV. That being said, I do use a large diode laser extensively to cut card stock templates/jigs and marking the flesh side of leather for cutting etc. Marking the leather this way saves a lot of time as I don't need to scribe or trace the patterns onto the leather. The charring of laser cut leather can be a pita and cleaning it up takes longer than just using a knife or such. I strongly recommend having your laser in an enclosure to allow good fume extraction and prevent possible eye damage from laser light.

Nice setup. I use a DA Paasche for airbrush work with dyes and I have found that using denatured alky instead of isopropyl alky for dilution gave me better penetration and finish on vegtan. The main reason for using an airbrush is gradient coloring/shading and the sunburst finish on small items is striking. I'm unsure how this will work on shoes or other previously treated leather. Similar to you I apply a single coat of NFO minimum of 24hrs to vegtan before applying Fiebings Pro Dye cut to about 50/50 with alky. Absorption and even spread is quite good. As tests I did sectional cuts of 8~10oz HO and found I got better dye penetration on NFO treated than without. Having spraying chamber or doing this outdoors and using a good respirator is important.

All the sites I find these are Japanese. One name I found them under is pattern clip but I cant find them in the US

I moved your post to Dyes, Antiques, Stains, Glues, Waxes, Finishes and Conditioners since it is a finish for leather edges.

What browser are you using?

200 is a successful request, so that's an odd error. Maybe try again in a few hours. You'll need to make a new response to this thread.

Thank you. kgg

@Shoe repair daughter Go ahead and start again, since the edit window is closed on this one. I'll delete this thread as soon as I see the new post. I'll Follow you so I get notified of new posts. Thanks for taking care of it!

It appears the price went up from the $9.99 CAD when I ordered it to $10.69 https://www.amazon.ca/Airbrush-Splitter-Disconnect-Regulation-Compressor/dp/B09XDYFG93/ref=sr_1_1?crid=3Q6F555AR3IIX&dib=eyJ2IjoiMSJ9.wE4XqJHbKH9dn79iiZk-EH1t-_Jmt1oZ7neTJr9ZKPxohuZnpVvwpU1yIvUXgiwOzoTAebFLHjntt9ZW0wvYsVeALoPaLkJPHr2218LLQuSBgPGUvBEporcPt_4adYb7yizB6HVkyOu5hy1C7qAQZIAyuzV8xGNNiZUlYiL_lE_tzm58kUgZYrBseG8m_Oy8BtJrtV5_dM_4h7ZvHL_g_V9xVBNCaGzdkGUX-Pz5328KvUKLdM22rGWoJyq4BTIypNIs3C3KPV4BOEbcOmVCsqA89TlC0sSNQ5n5DptkaqY.UTa_EHjXPEQqqPzvA02-2XfKfSD_5cp3R5p6ffLqCmA&dib_tag=se&keywords=Tiiyee+Metal+Air+Hose+Splitter%2C+3-Way+Cross+Lever%2C+Quick-Connect%2C+Silver%2C+6.3+mm+%2F+0.25+inch%2C+Airbrush+Adapter&qid=1758242082&sprefix=tiiyee+metal+air+hose+splitter%2C+3-way+cross+lever%2C+quick-connect%2C+silver%2C+6+3+mm+%2F+0+25+inch%2C+airbrush+adapter+%2Caps%2C206&sr=8-1 kgg

Unknown server error. Error code -200

The brake in a clutch motor is to stop the sewing machine when the "go" pedal is released even through the motor continues to run. In a servo motor the motor stops rotating when the "go" pedal is released so a brake in reality isn't necessary when sewing at slow speeds. At high speed sewing it would be possible to get some run on. kgg

could you put a link to the three way outlet splitter ($10 CAD)? I'm not searching with the correct terms. Thank You. Love the 3D printed holders

Is the brake optional on a clutch motor? I've been working on my clutch motor skills. In part to be better qualified to write this blog article: https://leatherworker.net/forum/blogs/entry/516-option-c-clutch-motor/ , and in part to satisfy curiosity. I've greased the pivot points and the main slide sleeve to improve the control and feel. I've slowed it down. I've backed off the slack adjuster in the brake far enough that I can consistently release the brake pressure when I want to use the hand wheel. But I keep asking myself, "Do I really need this brake?" The universal motor with triac speed control (aka "analog servo" aka "brushed servo") that I had for a few weeks also came with a brake shoe that activated whenever I was not on the gas. With that motor, I liked it better after I removed the brake shoe entirely. So I've been wondering, what is a straightforward way to remove the braking effect from a clutch motor, and are there any known downsides to doing so?

Thank you. You know me, no machine is complete until it has been 3Ded. I do use quick connectors on my other compressors but had difficulty finding them or this setup. Thank you. No method is the best it just depends on what will work best for the project. kgg

Nice setup, I knew you'd find some way of 3D printing something for it! The holder is very neat, by the way, if using jars it should be better than the hook-type thingy I have. Amongst my airbrushes is a Paasche like yours, very simple to use (and clean) and great for general use. It does require a higher pressure to run than internal mix units but for coverage work, as opposed to detail, it's a better brush to use. Rather than use an air splitter I fitted quick-release adaptors to all my brushes, simple to swap them and I only have one hose to avoid tripping over! Good writeup.

What error message do you get when attaching