Gun Holsters, Rifle Slings and Knife Sheathes
Protect your weapons with style and safety. Law enforcement, hunting, self protection, sharp shooting, target practice.
8,183 topics in this forum
-
- 3 followers
- 33 replies
- 58.4k views
LW's friend Jim Simmons has shared another fantastic lesson with us- the California Slim Jim Holster. California Holster Patterns.pdf California Holster Tutorial.pdf Nice, huh? Johanna California Holster Patterns.pdf California Holster Tutorial.pdf
Last reply by trmachine, -
- 12 followers
- 66 replies
- 101.2k views
Howdy folks, I would like to y'all to take a look at this Holster Making Tutorial. This will take you step by step through making a template for any size or model Six Shooter all the way through to finished holster. The methods shown are those I have used to make lined and un-lined holsters for the last 10 years. Even if you have never made a holster, the instructions are easy to follow with text and photographs showing each and every step involved in the process. The difference between this method and others you may have seen or currently use is there is no Wet Molding involved to make a holster that fits right, tight, and out of sight. Feel free…
Last reply by whistleshortbritches, -
- 2 followers
- 29 replies
- 40.3k views
John Henry typed this on a typewriter for a handout because we were doing so many holster classes in Macon. (In Georgia, they like their guns!) I scanned the pages, used some OCR software and have bleeding eyes from the editing- so blame any typos on me. I'm interested to know if you folks do about the same as he did, or what you do differently? Is there anything you like about this, or disagree with? I'm asking because I have dozens of workshops like this from our archives, and if y'all really want to see them, I will post them. I tried to clean up the formatting some, but he always was a meticulous outliner. Looking through all this other stuff of his tonight was bitter…
Last reply by JayEhl, -
- 5 followers
- 87 replies
- 89.9k views
Hi, ya'll. I just can't figure out how to get those glass smooth edges on my holsters. So far, I've been cutting, sewing, sanding edges, beveling edges, burnishing with water using a wooden post that i've got chucked onto an old motor, molding, dying, redoing edges, finishing. So, my problem is, when i do the edges the first time, i can get them looking good. I use water on the edge and use a little bit of wax on the burnishing wheel to do the edge. But, when I mold the holster, i put it into the oven to warm up and help create a stiff mold and once the holster is done drying, the edges are looking bad. So, I come back after molding and dying to try and touch up the…
Last reply by sbrownn, -
- 3 followers
- 40 replies
- 82k views
[Thought that I would at least get the text instructions posted out here. I am working on getting the pictures uploaded.] I have been on this forum for quite some time. I haven't posted much but I have seen several people ask about how a holster is made. I am not a professional. I pretty much do this as a very part time hobby. I thought that I would share the steps I take to design and make a holster. This particular model is my take on several makers. It is similar to Alessi's DOJ model. It has a slightly forward cant. I owe all I have learned through careful study of existing makers and many conversations with Lou Alessi. He has been a great mentor and frie…
Last reply by CaptQuirk, -
- 2 followers
- 22 replies
- 30.7k views
Someone asked about an ankle holster. I have one design that I have been making for several years that seems to go over very well in the Law Enforcement and Conceled Carry communities. So I thought I would try to show everyone how I make one. I used to make them out of neopreme but my supplier for the kind with a cloth front and back is not able to get that anymore so I have taken to using chap leather. So to get started here is a list of materials needed. 1 pc of 5 oz chap leather about 5- 1/2 X 15 inches 1 pc wool sheepskin scrap about 4-1/2 X 5-1/2 inches 2 pc of 2" x 4" Velcro Loop side 1 pc of 2" X 4" velcro hook side 1 holster designed to fit your weapon syste…
Last reply by Pappys Leather, -
- 11 replies
- 21.8k views
Okay folks, let's see if this rascal will upload. I ofered to draw up a pattern for a Pommel Holster and I used the 1881 Pattern for the set. Give this a look see and try it out. VERY IMPORTANT! Burn the PDF on a disc so your local print shop can print them for you. These pages are Tabloid size (11 1/2" x 17".) Tell them to set the PAGE SCALING to NONE. If they set it to "Fit to Page" the patterns will shrink! Have fun, Jim Pommel Holster Patterns.pdf The instructions on the next post.
Last reply by mitch0328, -
- 3 replies
- 10.9k views
The instruction pages are letter size so you can print them on your personal printer. Pommel Holster Instructions.pdf Enjoy, Jim
Last reply by gunter, -
- 2 followers
- 14 replies
- 2.2k views
Had a customer send me this photo of the holster and double mag pouch i built him. His dept. hosts a rodeo every year and they are alowed to use personal gear, so he wanted something that stood out. Im glad he chose mahogany... I think it pops.
Last reply by Stetson912, -
- 2 followers
- 7 replies
- 1.1k views
The sept/Oct issue of the learher crafter's journal had this neat little sheath by Gabor Pinter. I thought I'd have a go at it.
Last reply by Stetson912,