thunter9

i saw a post the other day about some one looking for good rawhide .can't seem to find the post since. montana leather sells about 7 different types cow goat elk dear pig and bleached these are full hides they have pre cut lace and i'm sure i've missed ssomething

either call or i have some questions what is the footage? if your in iowa where? if this is oak how much scarring and folds? was out west for years ,used mc pherson or the brother in billings mt at montana leather they sell a lot of leather the the boot and saddle makers from id. wy. mt sd probley some in nd mc phersons in portland

i'm game what color natural and or black how do want to do this 319 939 3934

can any one date an old frazier saddle from looking at it and from the numbers that are on the saddle the number is orb looks like 05 CP this is under the skirt in the back on top. its in good shape its a bear trap saddle it has cast iron oxbow stirrups tooled built in saddle bags. brass horn. small pouch with frazier snap in back of the cantle . the fenders are tooled with a naked lady getting out of a tub and a T and a upside down L and a bar under line it . its marked frazier in several places

THANK YOU I have a nice pc. of horse hide i've had for years its probly 2-3 oz. solf ,,smooth finish.. wasn't sure if not a furmmer type leather wouldn't of been a better chose. is going to be glued to a wooden board and then sell it

this is what i'm talking about

can any one tell me what type of leather is being used on antique writing desk tops please

its the skive leather bends is in 1/2 soles and such not any other geeeeeeeeeeee you might of been able to skive russet 8 oz. maybe never intended to skive light wweight leather

what do you want from radio shack their going out of bizness

if it was a 5 and 1 it woould work great as a boat ancher but since its a skiver you just need a blade and a couple screws maybe / theres not much to them free might be to much to spend

I picked up a late 1800's clark spool cabinet with 6 drawers and a leather top desk. I've gotten the vinyl off of it. got it about ready for a new leather top. now I have a nice pc of horse hide I've had for years black thought of using that . or is were there a more suitable leather . I want the leather to be correct for the period . its not like I'm going to use it. every one I see on line uses leather no vinyl also online are the old desks with the gold leaf on the trim. this I don't want. horse hide was used in in the beginning to line stump sockets in BK and AK lower limb prosthetic legs and some arms. thin very strong and soft or am I over thinking this?

just for the sake i checked on what fed x would charge and it would seem its more than what the horse would sell for sorry

Good morning,moneys all that. Now if you were to find a set or two more like 2 ? Cast iron vintage,antique cap guns in good shape that work. You might have some thing I might want to trade for. As for the horse the only issue is the peddle on how it attaches has an issue. If we get that far I'll send you some pictures.I'm not sure what shipping will be for something like that.you have a great holiday and see what you can find.

these are the 2 sets want to do the smaller set first how wide do you make your straps 1 1/4 seems about right. other set looks like it had leather as backing ,buts long gone

those are new ? mine are a 0-18 peddle bells .the leather is short buckel on one end and no backing leather has S wire . now the other are really old thats 24 bell set that the leather is shot S wiire missing a bell i have a back up . runs from a size 0-14 or a 12 that will be the one i'm trying first. it looks like your using a zipper stop to attach the loops together. about all i'll do with the bells is clean the gunk off them. i'll try and post a pic.

i have a adler 30-70 with a cluch motor in near newish condition and i think i want a cylinder arm walking foot tripple feed shuttle hook with reverse. and a salvo motor want to sew russet 8 oz three thicknesses how light a thread will a shuttle take without any problems can i spin it with z99 . would i lose much fuctionality by changing over to the cylinder other than the swivel head and getting down into the toe box

bob might be but i'm deaf talks like he's turned away from me

sounds like a lot of false hopes i found this i found that deals falling out of the sky lol when i of if I find what i'm looking my tune might change. as for now i've called denver and florida oh we'll get back to you be more than happy to sell you a NEW machine

$ ?

nice old landis grinder with dust collecter built in is that for sale

not sure any more call them call montana leather best speed single cap rivets i've ever used. through out 1000's of some others that never set right always left a burr. same as mcphersons in portland brothers this make any cents

have you found what your after? where are you at. have most from the early 70's through till they ended the first time or changed the name plus other patterns .golf bag ect

i'm thinking about replacing the leather on a full set of antique sleigh bells so i'm looking for some where to buy enough strap to put this together . i've looked over how they were done in years past. seem they used 1 1/4 inch harness leather with the square holes spaced about 5--6 inches apart so you'd attach the bell then slide a leather loop which is formed over double thickness. attach another loop till every things where you want it . then take another belt the same width and slide it on the back side through the loops. so what would ber better russet thats been died,, or something else skirting ect

ohio bag

sure looks like a champion curved needle sole sticher . quite heavy i know the landis comes apart so its a lot easier to move . the upper head. the bottom base, annd the middle the pc in the back come apart also if i remember right depending where you live on finding some one to work on it