Jump to content
AlZilla

Another slow down option?

Recommended Posts

I can't quite understand what's being demoed here but I think it's a new servo that will do 50 RPM without a reducer.  I don't think it's specific to the machine even though they're flipping a switch near the needle. I think it's just added there.

It's a Hightex/Cowboy product so maybe @CowboyBob can fill us in?  I wonder how the low speed torque would be?

 

 

Edited by AlZilla

Share this post


Link to post
Share on other sites

I'm wondering if that is the cowboy 797 sewing machine. It looks like a nice machine if I'm correct. 

Lol I'm maybe totally wrong too. 

Share this post


Link to post
Share on other sites

Waitaminnit ... Here are the specs on the motor:

 

https://cowboysew.com/750SL-low-speed-high-torque-servo-motor.htm

Share this post


Link to post
Share on other sites

Found a little info here.  http://kinedyne-motor.com/products/HM-750S/236.html

And a video actually sewing leather. 

Nice to see a real demo sewing a stack of leather.  Notice the large flywheel on the sewing machine, lots of speed reduction there.

Making me jealous, I want one, but for the amount I do these days, it's out of my range.

 

Share this post


Link to post
Share on other sites
33 minutes ago, Northmount said:

Found a little info here.  http://kinedyne-motor.com/products/HM-750S/236.html

And a video actually sewing leather. 

Nice to see a real demo sewing a stack of leather.  Notice the large flywheel on the sewing machine, lots of speed reduction there.

Making me jealous, I want one, but for the amount I do these days, it's out of my range.

 

Yeah I havent found a place you can actually order/buy it from in the U.S. Lol or maybe I did not look hard enough. 

Share this post


Link to post
Share on other sites

Audio on that video is shocking!!!! They must have some pretty impressive circuitry in the controller to do that and I'm guessing it's got a hefty price tag.

Share this post


Link to post
Share on other sites

I believe that’s the same machine I just set up for Tandys a couple weeks back. Didn’t pay attention to servo. Imma see what it’s working with when I’m in the store again. 

Share this post


Link to post
Share on other sites

Interesting motor! But seems they are kicking around promotion for this motor for maybe 2 years but yet no source to buy them or what? For a reason?

 

Edited by Constabulary

Share this post


Link to post
Share on other sites
16 hours ago, DieselTech said:

Yeah I havent found a place you can actually order/buy it from in the U.S. Lol or maybe I did not look hard enough. 

From the video description:

Kinedyne HM-750SL is the world's most powerful "low-speed, high-torque" servo motor that is able to maintain full power and torque even at low speed. Using photoelectric encoder, the minimum speed is down to 50 RPM. The actual sewing machine speed is 13 stitches per minute only which is great for more precise sewing of detailed work and heavier leather To sew very slowly is also ideal for leather working beginner. Using either an 750SL servo motor on heavy thick sewing applications completely eliminates the need for a now obsolete, "Speed Reducer". https://automatic-sewing.com/750SL-lo...

To purchase:

UK : https://www.franklinco.co.uk/product/...

USA: https://cowboysew.com/750SL-low-speed...

Australia: https://sunvalleytrading.com.au

Share this post


Link to post
Share on other sites

It popped up for me as a new video from Hightex. I agree it probably has a hefty pricetag. The couple of places that claim to offer it only have a "Get Quote" button.

Share this post


Link to post
Share on other sites

I just ordered one today from Ryan Neel. 
$320 delivered to my door (includes syncronizer) 

Share this post


Link to post
Share on other sites
16 minutes ago, James1 said:

I just ordered one today from Ryan Neel. 
$320 delivered to my door (includes syncronizer) 

Yeah I got a email from them today to email Ryan for a cost & never got around to it. 

Good to know the price. Thanks. 

Share this post


Link to post
Share on other sites
34 minutes ago, James1 said:

I just ordered one today from Ryan Neel. 
$320 delivered to my door (includes syncronizer) 

I think we'll all be interested in a follow up report. $300 is about what a servo and speed reducer would run anyway.

Share this post


Link to post
Share on other sites

I will report when I get it installed . I am putting it on a Juki TSC-441. 

Share this post


Link to post
Share on other sites
17 minutes ago, James1 said:

I will report when I get it installed . I am putting it on a Juki TSC-441. 

Please keep us posted. I was curious if a 441 could benefit from that setup. 

Thanks. 

Share this post


Link to post
Share on other sites

I've had a couple HM-750T's for a little over a year and installed a HM-750L on someone's machine. So far, they've been working pretty well. No complaints. It would be nice to see a few more videos of the HM-750S on some other machines. 

Share this post


Link to post
Share on other sites
On 3/18/2024 at 6:38 PM, James1 said:

I just ordered one today from Ryan Neel. 
$320 delivered to my door (includes synchronizer) 

Curious if you got it installed yet and how it's working?

Share this post


Link to post
Share on other sites

Sorry, yes I installed it and have made several bags with it and am very pleased with its performance, however I have only used it on 2 layers of 5/6 oz leather so far. I will try to sew max thickness for my machine and see how it does. It was very easy to install and set up using existing motor mount holes, and my belt from the clutch motor fit the new motor. I am fairly new at sewing, so I can’t give a professional review, but I can say that it is night and day difference from the clutch motor, I have so much control now going stitch by stitch. I wasn’t sure how I would like the Needle position sensor, but I am very pleased with it and use it almost the time. My machine has a speed reducer from the clutch motor, but I didn’t end up using it because I can go so slow without it. 

Share this post


Link to post
Share on other sites

Just curious if anyone else has purchased one of these yet? If so, what are your thoughts? 

Share this post


Link to post
Share on other sites
1 hour ago, James1 said:

Just curious if anyone else has purchased one of these yet? If so, what are your thoughts? 

@James1Which model did you purchase? I am interested in having slow speed and NPS on my 441 but NPS does not play nice with the speed reducer installed so this may be the way to get there.

Edited by BliksemDonder

Share this post


Link to post
Share on other sites

So far, I am very happy with it, like I said, I have a speed reducer, but I’m not using it because of the controllability of this motor. I have sewed two layers of 16 ounce skirting leather with no problems at all at the slowest setting of 50 

Share this post


Link to post
Share on other sites
8 minutes ago, James1 said:

I purchased the HM-750SL.

@James1Why I asked is that the 750SL & 750SH list the same specs on the website, maybe poor proofreading or maybe some other differences I missed? Other pages mention that the SL is intended for light-medium machines, not listing the 441class and SH for heavy duty machines listing the 441class. I will reach out to them to try and clarify on this.

The page I found this on is this one: https://cowboysew.com/heavy-duty-sewing-servo-motor.htm

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...