4 Slot Bifold Template & Directions

[Hi Im Joe]

I saw this post first on reddit.com/r/leathercraft and was super happy! I'm glad it made it over here too.

Thanks again for the free pattern.

[WinterBear]

Thanks, I'll have to give a wallet a try now. This seems like a good choice for a first one.

What weight do you all recommend for the exterior pieces, and the interior pocket pieces? I don't want it too thick from what I've read on the forum, but I don't want a "floppy" wallet either.

[plowboy73]

Thank you for sharing great design for us beginners.

[ducjes]

Thanks, I'll have to give a wallet a try now. This seems like a good choice for a first one.

What weight do you all recommend for the exterior pieces, and the interior pocket pieces? I don't want it too thick from what I've read on the forum, but I don't want a "floppy" wallet either.

If you have to go all one weight for the entire thing, I recommend 4 oz. If you have options, 5 oz for the exterior, 4 oz for the interior piece and 2.5 oz for the slots.

[olds cool]

Nicely done pattern. Thanks for sharing

[biglew]

I would like to thank you

[electrathon]

My only concern would be the stitching on the inner slot making an impression on the outer slot & the constant friction from card use.

The cards in the slot in front of it would stop any impression from transferring through. The pattern I have been using lately is very similar to this design, it works well to keep the bulk down in the wallet.

[nwdetectorist]

And we thank you for your support.

Bartles and Jaymes:)

[TexasJack]

Nice job on the pattern!!

[silverbullet]

Thanks this is the kind of people who make this the best foram on line. Helping friends should mean as much to new and unknown friends . Just feels good to help people it pays off in the end life is short easier to be nice then mean . Thanks again I've never made one from scratch this will help. Gary