Members dikman Posted November 6, 2016 Members Report Posted November 6, 2016 I'm with you, Big Sioux. I love music and when I'm casting boolits I'll play some nice easygoing instrumental/orchestral stuff but when I'm working with the leather - nothing. It's too distracting because I listen to the music, rather than concentrating on what I'm doing (and as you know, one mistake can ruin a project!). Quote Machines wot I have - Singer 51W59; Singer 331K4; Seiko STH-8BLD; Pfaff 335; CB4500. Chinese shoe patcher; Singer 201K (old hand crank)
Members TinkerTailor Posted November 6, 2016 Members Report Posted November 6, 2016 1 minute ago, dikman said: I'm with you, Big Sioux. I love music and when I'm casting boolits I'll play some nice easygoing instrumental/orchestral stuff but when I'm working with the leather - nothing. It's too distracting because I listen to the music, rather than concentrating on what I'm doing (and as you know, one mistake can ruin a project!). Part of the problem isIi have the choice of listening to my music or the neighbors......Silence is not an option. .........Ahhhh, city life, where it is just not nearly as acceptable to fire off a warning shot to get them to turn it down as it may be in Dwights neck of the woods...... Quote "If nobody shares what they know, we will eventually all know nothing." "There is no adventure in letting fear and common sense be your guide"
Members dikman Posted November 6, 2016 Members Report Posted November 6, 2016 Yeah, I can see where that can be a problem (I'm sort of rural but close to the city, so almost the best of both worlds - almost). I forgot to comment on Mr. Gibson's excellent blog, much truth in there. Quote Machines wot I have - Singer 51W59; Singer 331K4; Seiko STH-8BLD; Pfaff 335; CB4500. Chinese shoe patcher; Singer 201K (old hand crank)
Members Dwight Posted November 7, 2016 Members Report Posted November 7, 2016 4 hours ago, TinkerTailor said: Part of the problem isIi have the choice of listening to my music or the neighbors......Silence is not an option. .........Ahhhh, city life, where it is just not nearly as acceptable to fire off a warning shot to get them to turn it down as it may be in Dwights neck of the woods...... Ammo is getting too expensive for warning shots, . . . Our "big" noise problem is these nutcase kids who have a $300 vehicle, . . . but have 5 grand in the sound system, . . . just so they can crank up the base and shake the little birds out of their nests as they drive by. And don't think I haven't toyed with the idea of "target" shooting up next to the road when one goes by. About 100 grains of triple 7 in my old muzzle stuffer can make all the newly buried sit up and take notice, . . . But, . . . back to music, . . . guess I'm just from the generation that started out having to have it as a part of their lives, . . . so I enjoy it. May God bless, Dwight Quote If you can breathe, . . . thank God. If you can read, . . . thank a teacher. If you are reading this in English, . . . thank a veteran. www.dwightsgunleather.com
Members NikkiPizzini Posted November 7, 2016 Members Report Posted November 7, 2016 The Landis K shoe stitcher my associate Kelly learned on was called "La Beastia" It was a monster, a finger biter and a needle breaker... Kelly was convinced that my standing directly behind her and staring down " La Beastia" while threatening to cut her up into many pieces and sell her to the scrap metal factory allowed Kelly to safely stitch countless pairs of pointy toed Luchesses without a problem ... So I oblige d. The second Landis K Kelly stitched on was a honey of a stitcher, and appropriately named Buttercup. We had a crotchety old Singer 29 K patcher that we called Clementine, and so I would sing " My Darlin Clementine" each time I had to stitch something expensive. I believe all leather workers have such stories, what would be the fun otherwise??? Quote
BruceGibson Posted November 7, 2016 Author Report Posted November 7, 2016 6 hours ago, NikkiPizzini said: The Landis K shoe stitcher my associate Kelly learned on was called "La Beastia" It was a monster, a finger biter and a needle breaker... Kelly was convinced that my standing directly behind her and staring down " La Beastia" while threatening to cut her up into many pieces and sell her to the scrap metal factory allowed Kelly to safely stitch countless pairs of pointy toed Luchesses without a problem ... So I oblige d. The second Landis K Kelly stitched on was a honey of a stitcher, and appropriately named Buttercup. We had a crotchety old Singer 29 K patcher that we called Clementine, and so I would sing " My Darlin Clementine" each time I had to stitch something expensive. I believe all leather workers have such stories, what would be the fun otherwise??? LOL! Love this! Thanks everybody for all the comments ...most of us work in isolation, to some extent, so it's cool to me to see that we all deal with machinery that's "possessed" at various levels! Mine run the gamut from predictably annoying to full-on Stephen King novel, and all points in-between. Quote "Don't squat with your spurs on." www.GibsonLeather.com
makitmama Posted November 7, 2016 Report Posted November 7, 2016 I must confess that I have a whole set of CDs I made up, and use a different one for each task. Hand quilting/jewelry making? Harry Chapin/James Taylor/Carole King. Fast housework? ZZTop/BTO/classic rock. cross-country drive? southern trash rock. sewing on my Class IV? hymns/southern gospel. That way when I pray that the bobbin doesn't run out/needle doesn't break/thread doesn't jam, I can pray to music. Since starting the gospel music, I haven't hit or kicked my machine once. Quote
Moderator Wizcrafts Posted November 7, 2016 Moderator Report Posted November 7, 2016 12 hours ago, NikkiPizzini said: The Landis K shoe stitcher my associate Kelly learned on was called "La Beastia" It was a monster, a finger biter and a needle breaker... Kelly was convinced that my standing directly behind her and staring down " La Beastia" while threatening to cut her up into many pieces and sell her to the scrap metal factory allowed Kelly to safely stitch countless pairs of pointy toed Luchesses without a problem ... So I oblige d. The second Landis K Kelly stitched on was a honey of a stitcher, and appropriately named Buttercup. We had a crotchety old Singer 29 K patcher that we called Clementine, and so I would sing " My Darlin Clementine" each time I had to stitch something expensive. I believe all leather workers have such stories, what would be the fun otherwise??? I experience these moments when I sew on my patchers. At any given moment in time, one or both of them will skip stitches on an important repair job. The very next job will be sewn perfectly. They both prefer to listen to Internet Country radio stations. They agree with my choices of KEQX in Texas, or KWKZ in Cape Girardeau, Mo. Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Members Constabulary Posted November 7, 2016 Members Report Posted November 7, 2016 I think you folks should oil your machines instead Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Members TinkerTailor Posted November 7, 2016 Members Report Posted November 7, 2016 2 hours ago, Constabulary said: I think you folks should oil your machines instead On other forums there is a smilee that is giving the bird just for these kinds of comments. Try to imagine it now for me please. Quote "If nobody shares what they know, we will eventually all know nothing." "There is no adventure in letting fear and common sense be your guide"
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.