alpha2 Posted February 7, 2018 Report Posted February 7, 2018 Well, after getting some practice, including gluing up a proper thickness piece, I stitched a knife sheath. It went PRETTY well. I went REALLY slowly. I didn't use the edge guide, as I'm waiting on a part. I only messed up on the stitch line once, at the acute angle at the tip of the sheath. If I hadn't used a stitch groover it wouldn't show as much. I'm thinking I'll darken the visible line somehow. I'll be cutting a slot in the needle foot so I can see the line better. I imagine with practice I'll get a better at following the line. It appears that I'll have to do some more grinding/sanding on some parts, like the feed dog or edges of the plate. On the back you can see some sharp cuts from those parts. I didn't mind so much hand stitching the smaller, thinner projects, but keeping the back of the piece straight was always a challenge for me. Also, the thickness of holsters and welted sheaths was not as much fun as I'd like. This monster of a machine didn't break a sweat, though! The edges aren't finished yet. Just did some quick burnishing so far. Quote So much leather...so little time.
CowboyBob Posted February 7, 2018 Report Posted February 7, 2018 Hello Jeff, That's a great looking first sheath there.Since your not sewing that thick you might try loosening up the foot pressure a couple of turns that will lessen the marking.(The black knob on top) Quote Bob Kovar Toledo Industrial Sewing Machine Sales Ltd. 3631 Marine Rd Toledo,Ohio 43609 1-866-362-7397
Members AdamPCain Posted February 7, 2018 Members Report Posted February 7, 2018 First try wow looks awesome, I am picking up my first sewing machine this Friday can't wait. Quote
bikermutt07 Posted February 7, 2018 Report Posted February 7, 2018 Great job, Alpha. Quote I'm not paying 80 bucks for a belt!!! It's a strip of leather. How hard could it be? 4 years and 3 grand later.... I have a belt I can finally live with. Stitching is like gravy, it's only great if you make it every day. From Texas but in Bossier City, Louisiana.
alpha2 Posted February 7, 2018 Author Report Posted February 7, 2018 50 minutes ago, CowboyBob said: Hello Jeff, That's a great looking first sheath there.Since your not sewing that thick you might try loosening up the foot pressure a couple of turns that will lessen the marking.(The black knob on top) Thanks, Bob, will do! Quote So much leather...so little time.
alpha2 Posted February 7, 2018 Author Report Posted February 7, 2018 Interestingly, the knife fit fine before stitching. It was tight after stitching. The stitches are right in the middle of the glued-in welts. So I took a open end wrench and shoved it in as far as it would go...perfect! Quote So much leather...so little time.
Members Rolandranch Posted February 7, 2018 Members Report Posted February 7, 2018 7 minutes ago, alpha2 said: Interestingly, the knife fit fine before stitching. It was tight after stitching. The stitches are right in the middle of the glued-in welts. So I took a open end wrench and shoved it in as far as it would go...perfect! sometimes all it takes is a hammer... Good job! Quote
garypl Posted February 7, 2018 Report Posted February 7, 2018 Looks good Jeff! You might want to take a small paintbrush and apply some light dye to the groove where your stitch line wandered a bit - might make it invisible. Most folks probably wouldn't notice anyway, but I am like you - I like everything to be as good as I can make it! Gary Quote Cowboy 4500, Consew 206RB-4
alpha2 Posted February 8, 2018 Author Report Posted February 8, 2018 That's my plan, Gary, darken it a bit. Easy fix. This was a "no charge" prototype, so it's going to be GTG. Still, I want it to be indicative of what I may be able to do! There's a local VFW biker group that has been good to me re: sheaths, I'll get the pics off to them. They MUST have a bunch of KaBars that need upgraded sheaths. They seem to be hankering for some sheaths in their club colors. Quote So much leather...so little time.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.