Jump to content

Recommended Posts

  • Moderator
Posted

We were commissioned to make a series of bags for a Greek historical society as part of their costumes.  Each bag is supposed to be unique and the only requirements are that there is no metal on any bag, and that any design features must have been possible in ancient Greece.  This bag features all hand made construction, and adjustable strap with no buckles and a captive loop closure.  Of course, it's hand stitched and made with love :)

The only cheat is the thread.  I should have used linen but this is nylon.  Shhhhh.

 

purse1.jpg

purse2.jpg

 

Learnleather.com

  • Members
Posted

I assume that border stamp was made by one of Bob Beards' ancestors. ;)

  • Moderator
Posted
55 minutes ago, TSes said:

I assume that border stamp was made by one of Bob Beards' ancestors. ;)

Artistic license.  You COULD do it by hand and some of the art in Acropolis Museum in Athens has something similar, if not quite as crisp.

 

Learnleather.com

  • Members
Posted

I think it looks very nice. Your stitching is straight and clean, even on the back side. Great job.

  • Members
Posted

Looks good Mike. What leather is that? It's like a fat milled look but not sure if that is actually milled or just character from the critter it came from.

  • Members
Posted

Nice!

Machines: Mitsubishi DB-130 single needle, Kansai Special RX-9803/UTC coverstitch, Union Special 56300F chainstitch, Pfaff 335-17 cylinder arm walking foot, Bonis Type A fur machine, Huji 43-6 patcher, Singer 99 hand cranked, Juki DDL-553 single needle (for sale)

  • Members
Posted

I like this one better than the first. Nice work for sure.

"Oh my God....I beseech thee grant me the grace to remain in Thy Presence; and to this end do Thou prosper me with Thy assistance, receive all my works, and possess all my affections" Brother Lawrence c.1614-1691

plinkercases.ca

  • Moderator
Posted
8 hours ago, TSes said:

I think it looks very nice. Your stitching is straight and clean, even on the back side. Great job.

Thank you.  I remember the days where I would hide the back side of stitching :)

8 hours ago, battlemunky said:

Looks good Mike. What leather is that? It's like a fat milled look but not sure if that is actually milled or just character from the critter it came from.

Honestly I have no idea.  Could be fat milled.  Nat calls it oil hide, but it isn't like any oil hide I've ever seen.  Has a textured surface on it and stamps ok, but its very soft.

5 hours ago, DrmCa said:

Nice!

Thank you.

3 hours ago, plinkercases said:

I like this one better than the first. Nice work for sure.

Me too.  The second one of anything is always better :)  Thanks!

 

Learnleather.com

Posted

Mike, I liked your idea with an adjustable strap length. Everything else, as always, is superb and thoughtful.

  • Moderator
Posted
7 minutes ago, ABHandmade said:

Mike, I liked your idea with an adjustable strap length. Everything else, as always, is superb and thoughtful.

Thank you.  I like to use friction for straps and retention.  In this case, I just put two cords in one hole and there's enough friction to keep it tight.  And in the keepers creating a sharp bend and it won't move unless you want it to.

 

Learnleather.com

  • Members
Posted
20 hours ago, TSes said:

I assume that border stamp was made by one of Bob Beards' ancestors. ;)

19 hours ago, immiketoo said:

Artistic license.  You COULD do it by hand and some of the art in Acropolis Museum in Athens has something similar, if not quite as crisp.

Some things never change.  Then as now, some people had more money than others and liked to flaunt it with a bit o' bling.  When people are willing to pay for bling, there are always going to be others willing to make something to accommodate, for profit.  Where there is a craftsman willing to make and sell things with bling, there's another craftsman willing to make the tools needed for said bling. 

I could be wrong, but I think Bob Beard hand-cuts his tools.  Stamps were almost certainly made - probably using brass - possibly cast then hand finished, maybe just cut from a chunk of brass.  They would not have lasted like steel does, but long enough to makes lots of bling before they wore out.  As for the repeated wave patter, who knows ...Maybe. A Greek key pattern seems pretty likely - they seemed to like that one well enough to have it named for 'em!

I also wonder if somebody willing to pay for that kind of bling might have been willing to pay for a bit of metal too for clasps and such, maybe even made from gold?  Maybe a gemstone button or two?  We'll probably never know, but it's interesting to think about.

No matter what the ancients did, your work looks fantastic, Mike!

- Bill

 

 

 

 

  • Moderator
Posted

Bill, 

You nailed it.  In the museum in Athens, there was a LOT of bling, and a lot of gold.  There's another design that was my first choice, its called a meandrous.  Sort of like the wave pattern but spirals.  At the price point for these, hand carving it was out of the question, and the leather wouldn't have supported it anyway.  Greek clothing and are was very detailed and their metal work was astounding.  So much precision in their surviving jewelry.  I just tried to channel some of the feeling of the things we say rather than recreate a specific piece.  Hopefully, the client will like them.

 

Learnleather.com

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...