Members Horsewhishper Posted August 30, 2018 Members Report Posted August 30, 2018 Hey guys and gals just looking for opinions on sewing machines. I am looking at a cb4500 for 2400 dollars but that is a large chunk of change . I hand sew everything right now and enjoy it but am enthralled with how well this machine stitches straight, true and fast , was going to buy cheaper but I figured if I am gonna spend the money might aswell get one for everything I will ever need to do. Any thoughts welcome Quote
bikermutt07 Posted August 30, 2018 Report Posted August 30, 2018 (edited) I just got my first machine today and it's no 4500. And a 4500 won't sew absolutely everything, as no machine does everything ( just info, not harping). But here's my testimony. In 4 years I have made only 2 totes. I have not made purses, stitched belts, or made even close to as many bags as I have wanted. Why? All that stitching. I got a great deal on a 206rb-1 that will sew all the above. Now I don't feel so intimidated. Some day I may find a great deal on a 4500, then I can make all the holsters, gunbelts and armor I want. A guy can dream Edited August 30, 2018 by bikermutt07 Quote I'm not paying 80 bucks for a belt!!! It's a strip of leather. How hard could it be? 4 years and 3 grand later.... I have a belt I can finally live with. Stitching is like gravy, it's only great if you make it every day. From Texas but in Bossier City, Louisiana.
JJN Posted August 30, 2018 Report Posted August 30, 2018 (edited) @bikermutt07 Congratulations on your Consew! I hope to see what you make over the next few months. @Horsewhishper When I have the need to sew thicker than 3/8" leather, I will be looking at a cb4500. I have read very good reviews about that machine on LW. Edited August 30, 2018 by JJN Quote Ferdco Juki Pro-2000, Juki DNU-1541S, LS-1341, LU-563, DLN-9010A-SH, MO-6714S, Consew 206RB, 206RB-1, Chandler/Bernina 217 6mm w/Cam Reader, Brother LT2-B842-5
Moderator Wizcrafts Posted August 30, 2018 Moderator Report Posted August 30, 2018 1 hour ago, Horsewhishper said: Hey guys and gals just looking for opinions on sewing machines. I am looking at a cb4500 for 2400 dollars but that is a large chunk of change . I hand sew everything right now and enjoy it but am enthralled with how well this machine stitches straight, true and fast , was going to buy cheaper but I figured if I am gonna spend the money might aswell get one for everything I will ever need to do. Any thoughts welcome You could start with a CB3200 that sells for $1695, plus gas or shipping. It sews from just under 1/8 inch up to 1/2 inch. Also, it is possible to sew into thinner material by dumbing down the machine. Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Members dikman Posted August 30, 2018 Members Report Posted August 30, 2018 Are they worth the money? Yes and no. If you're in business or have a ready market as a hobbyist then yes, the right sewing machines will make life much easier. If, however, you just dabble in leatherwork (as many of us do) then it's doubtful you will ever recover the cost of, for example, a CB4500. Of course some of us just enjoy having the machines for what they are and accept that it won't pay for itself. As bikermutt said, however, one machine won't "do it all". If you buy a CB4500 (or its equivalent) you'll find that you'll need a smaller machine for lighter materials. By all means if you can afford it go for it, just don't expect it to do everything. Quote Machines wot I have - Singer 51W59; Singer 331K4; Seiko STH-8BLD; Pfaff 335; CB4500. Chinese shoe patcher; Singer 201K (old hand crank)
Members Constabulary Posted August 30, 2018 Members Report Posted August 30, 2018 For sure everyone wants the best machine but often they are over the budget. Charging the credit card is easy but could cause other problems in the following weeks or month. You sometimes see people here who sell their expensive machines after a few month or so. Probably because of being short of money for too long cause hobby / business did not pay off, it was not the right hobby or just other things (or bills) took priority - lots of different stories. So why not staring with a used machine - I know you barely find the heavy 441 type machines used but why not starting with machines like the Singer 45K or other vintage machines heavy leather sewing machines? It for sure depends on the local market and often people have better access to new machines than to used machines but I would consider vintage machines at least as an option. These machines have been used for decades in all branches of the leather trade, they for sure do not have all the advantages of modern triple feed / unison feed machines (well, new machines have their issued too) but they are reliable and some of their "drawbacks" are often neglectable and depend on the product you want to sew. I don´t want to hold you back from buying new but used machines can be a good and affordable start into machine sewing. And I tell you - restoring AND using them later on is very satisfying. But restoring is not everyone's cup of tea. My 2 cents Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Members brmax Posted August 30, 2018 Members Report Posted August 30, 2018 In reality only you can determine your options to sell a product. I say that because that is first, before the tooling. Im sure you have read many articles on these in particular leather sew machines. They consist of some great tips to more effectively produce good results and operator usage. I want to respectfully emphasize how some here in or on the forum can adjust a machine in Very short order. This ability can be understood as only a lifetime of experience with these machines. In this I can positively say the only quick or in short order change to smart’n up or the dumbing down a sew machine is the change of thread color. Anything else is uh well the very reason factories dont do it quickly. The tip I can provide is selecting projects that don’t require much if any machine change. This will be easier to focus on machine, budget and a sales goal. good day Floyd Quote
Members chrisash Posted August 30, 2018 Members Report Posted August 30, 2018 My own knowledge is Embroidery machines and not leather machines , but what I have gathered on this forum that a good middle of the road seems to be the 3200 which seems to cover many requirements at a lesser cost or as stated above a good secondhand machine may be a wise choice and will not loose money but may also be kept for when you need both a larger and lower requirements Quote Mi omputer is ot ood at speeling , it's not me
Contributing Member JLSleather Posted August 30, 2018 Contributing Member Report Posted August 30, 2018 Some guys will buy machines because they want to earn money, others will have them because they like doing it. Either way, up to you if it's "worth it". Determine what you want to sew. Making yourself one holster? Probably not "worth it" getting a machine. Sewing one belt? I'd pass. Sewing TEN belts, total, I'd still pass. You want to sew 10 belts per week, I'd get a machine. "They say" that the 441 machines will sew leather an inch thick. Personally, I don't see myself ever needing to do that. Most of my belts and holsters range from 3/16" to 5/16" thick. The machine that sews those "can't" sew my wallets (it "can", but I don't care to change it, only to change it back). So, decide if it's "Worth it" to get a machine. And IF it is, decide what you want to sew (leather thickness AND thread size you want to use) and there's your starting point. For a good while, I made more wallets than holsters, so I had a machine that stitched the wallets very well, and hand stitched the holsters (which are short). Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Members Yetibelle Posted August 30, 2018 Members Report Posted August 30, 2018 The machine will last a lifetime, unlike my computer or phone, and if I wanted to sell it they really hold there value. One of the less discussed benefits of this investment is the ability to quickly prototype new projects that I was not willing or able to tackle before. I can grab some low grade veg-tan, trace out a project and sew it up in 20-30 minutes and typically the first draft looks pretty good. This is a really big deal, it helps you flush out ideas and concepts that you would never want to take 2-3 hours and hand-sew. So your skills and designs will improve very quickly. This flexibility is really amazing you will be making things left and right just because you can and it become rather addictive. I grab some scrap from one project and make a small leather case out if it, pound a snap on it and give it away as a gift. Also people will start bringing you there stuff to fix and unlike before when you had to hand-sew, you will be excited and patch a bag or a backpack in a few minutes. Its really great feeling. Quote One day I hope to learn how to sew..... Singer 111W155 - Singer 29-4 - Singer 78-1 - Singer 7-31 - Singer 109w100 - Singer 46W-SV-16 - Adler 20-19 - Cowboy CB-4500
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.