Frankqv Report post Posted May 18, 2019 I remember seeing this topic once before,but I was unable to find it. Once you have amassed a number of mold guns, storage becomes a consideration. After REV 1,2 and 3 I've come up with a basic storage concept. I am sure other have as good if not better, but here it is. Laser cut ,shows the Build,about 15 minutes to assemble. I have 5,10, and 16 gun designs can be stacked.First photo shows 45 gun storage.Last photo show storage the largest mold is an FN57. The header piece is the slick side of Masonite so you can use removable stickers to mark slots as you change configurations.I don't know if there is any interest in these,I do know they have made inventory and usage of mold guns much more friendly. If interested they could be shipped knock down,you assemble,wood glue and a mallet. Sstacked.The fist Quote Share this post Link to post Share on other sites
coma44 Report post Posted May 19, 2019 I like it. Once I get a pile I will have to do something similar Quote Share this post Link to post Share on other sites
chrisash Report post Posted May 19, 2019 Great design and lateral thinking, you should sell them as flat packs Quote Share this post Link to post Share on other sites
chrisash Report post Posted May 19, 2019 Just noticed the front panel, this does not show how its connected, but it could be made with similar slots on both the center and end of the plank as well as on both ends and center of the main box shape, but with slot down holes and similar to push it over the lugs (on the main box two hook type lugs per end and to small slots on the top board) and pull down Hope that makes sense Quote Share this post Link to post Share on other sites
kgg Report post Posted May 19, 2019 Nice clean design, like it. kgg Quote Share this post Link to post Share on other sites
Lobo Report post Posted May 30, 2019 Very nice concept. I always kept my dummies hanging on the wall, arranged by make and model. Lots of nail holes in that wall! Quote Share this post Link to post Share on other sites
Bayou Bengal Report post Posted July 5, 2019 That beats the rubbermaid bin I drop them in. I need to do that. I’m tired of bending over digging for this or that Quote Share this post Link to post Share on other sites
greystoneleatherllc Report post Posted July 6, 2019 I'd be interested in 5-6, 10 slot units might have to count mold and see if I need more db Quote Share this post Link to post Share on other sites
JLSleather Report post Posted July 6, 2019 Pretty sure this was a CD / DVD rack in it's day. Found in thrift store for $3. Holds about 100 guns. But I'm in the process of building something more substantial that will hang on a wall, freeing up floor space (even though this only takes about 1 foot out and 3 feet wide). I'll upload a sketch of how to make it if anybody's interested, though I imagine it's simple enough anybody can do it quickly without my input Quote Share this post Link to post Share on other sites
Bayou Bengal Report post Posted July 7, 2019 On 7/6/2019 at 9:15 AM, JLSleather said: Pretty sure this was a CD / DVD rack in it's day. Found in thrift store for $3. Holds about 100 guns. But I'm in the process of building something more substantial that will hang on a wall, freeing up floor space (even though this only takes about 1 foot out and 3 feet wide). I'll upload a sketch of how to make it if anybody's interested, though I imagine it's simple enough anybody can do it quickly without my input Very interested Quote Share this post Link to post Share on other sites
