Engine1 Report post Posted March 4, 2020 Hey, I’m researching stitching clamps before I buy any thoughts. I’m considering dream factory or Romanov middle size. I program be doing wallets, watch bands, and journal covers as I don’t see my self hand stitching bag when I have two perfectly good machines for that. Quote Share this post Link to post Share on other sites
Tugadude Report post Posted March 4, 2020 I cringe when I read questions that contain the word best. I think best varies based upon the person and the product in this case. I would add one more option to the list. I know I have often longed for a pony with wider jaws, like this... Have you considered making your own until you decide what you need? Do you have the skills? A lot of us made our own and liked the results. If you plunk down $100 or more only to find it doesn't suit, that would be a shame. Of the two you listed, they are remarkably similar. Go with the best deal. Both are decent. Quote Share this post Link to post Share on other sites
Scoutmom103 Report post Posted March 5, 2020 Have you considered making your own until you decide what you need? Do you have the skills? A lot of us made our own and liked the results. If you plunk down $100 or more only to find it doesn't suit, that would be a shame. Of the two you listed, they are remarkably similar. Go with the best deal. Both are decent. Did you make this Tugadude? I like the longer "clamps" integrated and it's apparent maneuverability. Quote Share this post Link to post Share on other sites
Tugadude Report post Posted March 5, 2020 No, I saw it on etsy. I really like it too. Quote Share this post Link to post Share on other sites
johnv474 Report post Posted March 5, 2020 FWIW I have owned a few styles. Since the "Grandpa's Sit N Stitch" is no longer made, I plan to go with Dream Factory's floorstanding model from Etsy. I would also buy any of the other sizes (floorstanding or large, if I could only buy one). Quote Share this post Link to post Share on other sites
paloma Report post Posted March 5, 2020 (edited) I use this one,and i am very glad of it... This one is the model 100 mm , i also have the smaller one 70 mm and depending on the job I have to do, I keep the base and just change the clamp. the manufacturer: http://shornik.com/index.php/en/ I dont know if it's the "Best" but for my use everydays it can accept nearly 99% of my needs. Edited March 5, 2020 by paloma Quote Share this post Link to post Share on other sites
chrisash Report post Posted March 5, 2020 Myself I find the cheap ones on Etsy or ebay are ok , the ones that fit under tour knees, which means I can also swivel around to get the best light if needed, but whatever you chose they will be fine Quote Share this post Link to post Share on other sites
mike02130 Report post Posted March 5, 2020 Make your own. One doesn’t need much know-how. Three pieces of 1”x4” wood, a hinge, few screws and a bolt. Lumber yard can cut for you. Quote Share this post Link to post Share on other sites
Hardrada Report post Posted March 5, 2020 I like the Dream Factory ones. Been wanting one for quite a while. I almost bit the bullet last December. Not sure I'd risk ordering anything from South Korea at the present moment, though. Quote Share this post Link to post Share on other sites
kirbytorres Report post Posted March 6, 2020 On 3/5/2020 at 6:51 AM, Tugadude said: Love the magnet at the sides of the saddle.. Quote Share this post Link to post Share on other sites
Tugadude Report post Posted March 6, 2020 The magnets are a great touch. You can also create a space to hold some beeswax to use on thread. Lots of ways to customize. Quote Share this post Link to post Share on other sites
paloma Report post Posted March 6, 2020 Yes, magnets on a clamp it's really convenient.. Quote Share this post Link to post Share on other sites
dikman Report post Posted March 10, 2020 Tugadude, I like that, it's a clever design. Quote Share this post Link to post Share on other sites
Draconias Report post Posted April 26, 2020 On 3/4/2020 at 2:51 PM, Tugadude said: I cringe when I read questions that contain the word best. I think best varies based upon the person and the product in this case. I would add one more option to the list. I know I have often longed for a pony with wider jaws, like this... Have you considered making your own until you decide what you need? Do you have the skills? A lot of us made our own and liked the results. If you plunk down $100 or more only to find it doesn't suit, that would be a shame. Of the two you listed, they are remarkably similar. Go with the best deal. Both are decent. I also came across this on etsy, and really like the modular design. I have made a couple of the bases out of maple, and have bought the clamps (for the base) from a local woodworking store. Currently working on a couple of shorter (7") clamps that will be 3" wide for my wife and myself. I don't care for the plastic handles, I tend to strip them out. I plan on just using a regular bolt through the bottom with a flat washer on both sides and tighten it down with a lock nut where it will turn for me but not be loose. I have rare earth magnets from my model airplane hobby I plan to insert on both sides of the clamps, and pickup one of the cam levers from Rockler for tightening the clamps. This is currently a work in progress, I'll post more pictures once I have finished it. Quote Share this post Link to post Share on other sites
Tugadude Report post Posted April 27, 2020 15 hours ago, Draconias said: I also came across this on etsy, and really like the modular design. I have made a couple of the bases out of maple, and have bought the clamps (for the base) from a local woodworking store. Currently working on a couple of shorter (7") clamps that will be 3" wide for my wife and myself. I don't care for the plastic handles, I tend to strip them out. I plan on just using a regular bolt through the bottom with a flat washer on both sides and tighten it down with a lock nut where it will turn for me but not be loose. I have rare earth magnets from my model airplane hobby I plan to insert on both sides of the clamps, and pickup one of the cam levers from Rockler for tightening the clamps. This is currently a work in progress, I'll post more pictures once I have finished it. Very cool. You mentioned magnets and it got me thinking in a direction I hadn't before. I've seen where folks place magnets on clams or ponys to hold needles, etc., but I never considered using magnets to hold the jaws together. Mush of the stuff I do is small. Watch straps, small wallets, etc. There is no reason why magnets wouldn't suffice to hold these kinds of lightweight items. So no need to clamp anything at all, quick and easy. Then if you are doing a large bag or something that needs to be clamped more securely you would then rely on whatever mechanism you have at your disposal. Interesting. Quote Share this post Link to post Share on other sites
Draconias Report post Posted April 27, 2020 In my post above, I was just saying that I will be putting the magnets on the exterior side to hold the needles. But I have to admit that it is a cool idea to use magnets to hold the clamps together. If they were strong, you might have to use some kind of lever to pry them apart Quote Share this post Link to post Share on other sites
fredk Report post Posted April 27, 2020 5 hours ago, Tugadude said: Very cool. You mentioned magnets and it got me thinking in a direction I hadn't before. I've seen where folks place magnets on clams or ponys to hold needles, etc., but I never considered using magnets to hold the jaws together. Mush of the stuff I do is small. Watch straps, small wallets, etc. There is no reason why magnets wouldn't suffice to hold these kinds of lightweight items. So no need to clamp anything at all, quick and easy. Then if you are doing a large bag or something that needs to be clamped more securely you would then rely on whatever mechanism you have at your disposal. Interesting. yup an Interesting idea. In my experience the magnets need to be very strong, eg N52 minimum, to hold through leather, but if the magnets are outside the leather area N36 or so would possibly do Quote Share this post Link to post Share on other sites
johnv474 Report post Posted May 5, 2020 On 4/27/2020 at 1:56 PM, fredk said: yup an Interesting idea. In my experience the magnets need to be very strong, eg N52 minimum, to hold through leather, but if the magnets are outside the leather area N36 or so would possibly do Thank you for these details. Surely others, like me, find magnets interesting but do not yet know enough to select them appropriately. Quote Share this post Link to post Share on other sites
fredk Report post Posted May 5, 2020 48 minutes ago, johnv474 said: Thank you for these details. Surely others, like me, find magnets interesting but do not yet know enough to select them appropriately. ah, do not be fooled. I only quote from experience, not science. I bought magnets rated as N36. They just about hold together thru 1 thickness of 0.8mm pigskin. I have also bought magnets rated at N52 and they hold thru 1.1mm upholstery leather. Quote Share this post Link to post Share on other sites
tsunkasapa Report post Posted May 5, 2020 I bought what was referred to as a "Grandpa's Sit N Stitch" at the Pendleton Leather show 2 years ago. $20 and a few hours of my time. I wouldn't sew at anything else! They DO exist. Quote Share this post Link to post Share on other sites
johnv474 Report post Posted May 5, 2020 There used to be a site. Grandpas pastime or something. However the site was down last I looked, unfortunately. Quote Share this post Link to post Share on other sites