Members Klara Posted August 6, 2021 Members Report Posted August 6, 2021 4 hours ago, Spyros said: ... When I get the occasional itch for woodworking I just roll everything outside under the carport with a big mask on, when I finish I blow everything with a leaf blower and roll it back inside. Brillant idea, sadly too late. During my recent bed-building I covered the whole wood-workshop in wood dust. Fortunately it's separate from the one for leather and textiles. Quote
Members Sheilajeanne Posted August 6, 2021 Members Report Posted August 6, 2021 Mike, so the only thing keeping that clam on your work table is the weight of the antique iron?? How well does that work? Quote
Members zuludog Posted August 6, 2021 Members Report Posted August 6, 2021 This is three pages of this subject now, and it's been going on too long - you'll have to clamp down on it! Quote
Contributing Member fredk Posted August 6, 2021 Contributing Member Report Posted August 6, 2021 33 minutes ago, zuludog said: This is three pages of this subject now, and it's been going on too long - you'll have to clamp down on it! LOL, that had me in stitches! 3 pages aint long for a thread Don't let it needle you Quote Al speling misteaks aer all mi own werk..
Members Spyros Posted August 6, 2021 Members Report Posted August 6, 2021 (edited) Oh get off your high pony, people wanna talk Edited August 6, 2021 by Spyros Quote
Members mike02130 Posted August 6, 2021 Members Report Posted August 6, 2021 9 hours ago, Sheilajeanne said: Mike, so the only thing keeping that clam on your work table is the weight of the antique iron?? How well does that work? It works well. I'm not putting any downward pressure on the pony. It is an 8# iron. A clamp would work well, too. Quote @mike02130 Instagram
Members dikman Posted August 6, 2021 Members Report Posted August 6, 2021 18 hours ago, Spyros said: When I get the occasional itch for woodworking I just roll everything outside under the carport with a big mask on, when I finish I blow everything with a leaf blower and roll it back inside. Most of my woodworking is done outside for that reason! The lathe in particular makes a monumental mess, so when I want to use it I bolt/clamp it to an outside bench. Seagiant, there's some nice-looking wood in yours. Quote Machines wot I have - Singer 51W59; Singer 331K4; Seiko STH-8BLD; Pfaff 335; CB4500. Chinese shoe patcher; Singer 201K (old hand crank)
CFM tsunkasapa Posted August 7, 2021 CFM Report Posted August 7, 2021 After 45 years of carpentry I have never worried about saw/sanding dust. I have heard that I might develop an allergy to walnuts from working with the wood and inhaling the dust. But I have never liked walnuts, so I'm not concerned. In all those years the worst I've had to deal with is getting slightly stuffy. Quote Hoka Hey! Today, tomorrow, next week, what does it matter?
Members Sheilajeanne Posted August 7, 2021 Members Report Posted August 7, 2021 The chemical in walnut sawdust/shavings, juglone, is extremely toxic. Horses have died when walnut shavings was used as their bedding. I would certainly wear a mask if working with walnut wood. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.