rickybobby Posted December 21, 2021 Report Posted December 21, 2021 These short and stubby little guns are a challenge to build sometimes. There is little on the gun body to mold leather to for "friction only" retention so I normally suggest a Thumb Break. The Leather is Wickett & Craig 8oz Russet on the main body and W&C Mahogany on the front overlay. Thread is 207 top 138 bottom in Henna from Weaver Leather. The finish is 50/50 Resolene & Water, holster was dipped to coat completely. After drying we rubbed some Fiebings Aussie Conditioner on the surface. Questions, Comments, Constructive Criticism are always welcome! Thanks for looking! Rick Quote
Contributing Member JLSleather Posted December 21, 2021 Contributing Member Report Posted December 21, 2021 (edited) NOT hatin' that one bit Edited December 21, 2021 by JLSleather Quote
Members AzShooter Posted December 21, 2021 Members Report Posted December 21, 2021 Very well done. Looks like the gun will be secure. Nice work. Quote
Members chiefjason Posted December 21, 2021 Members Report Posted December 21, 2021 Like making one for a Seecamp. They are so cute! lol I hate how square they come out. But just no way to get around it. Not enough room to get fancy or nice sweeping curves. You just gotta make it clean and nice. And you did a good job of that. Quote
Members PastorBob Posted December 21, 2021 Members Report Posted December 21, 2021 Very nice work. Not a fan of thumb breaks, but with this wee gun, there really isn't a choice. Very nice! Quote
Members DrmCa Posted December 21, 2021 Members Report Posted December 21, 2021 That is a lot of holster for so little of a gun. Quote
CFM chuck123wapati Posted December 21, 2021 CFM Report Posted December 21, 2021 that pretty cool indeed !! Quote
rickybobby Posted December 22, 2021 Author Report Posted December 22, 2021 On 12/21/2021 at 2:59 AM, chiefjason said: Like making one for a Seecamp. They are so cute! lol I hate how square they come out. But just no way to get around it. Not enough room to get fancy or nice sweeping curves. You just gotta make it clean and nice. And you did a good job of that. I do like my Seecamp. Once you become familiar with the little critter they are a nifty little gun. Mine is the .32acp several have told me that is the preferred caliber for that gun. Here is my version of the Pancake for the Seecamp it has a little more "style" to the lines ... On 12/21/2021 at 12:53 AM, AzShooter said: Very well done. Looks like the gun will be secure. Nice work. Thank you! On 12/21/2021 at 5:09 AM, PastorBob said: Very nice work. Not a fan of thumb breaks, but with this wee gun, there really isn't a choice. Very nice! Thank you, no one wants their little gun popping out of their Holster! On 12/21/2021 at 8:00 AM, DrmCa said: That is a lot of holster for so little of a gun. The ratio of leather to gun is very close! lol! On 12/21/2021 at 8:18 AM, chuck123wapati said: that pretty cool indeed !! Thank you Quote
Contributing Member JLSleather Posted December 22, 2021 Contributing Member Report Posted December 22, 2021 1 hour ago, rickybobby said: Here is my version of the Pancake for the Seecamp it has a little more "style" to the lines ... This is nice Been meaning to do a layout for this one.. like for about a year now Quote
Members spydie Posted September 3, 2023 Members Report Posted September 3, 2023 I have a poly PT22 that I'd like one for. How much? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.