All Activity

A site search for LU-563 turns up 18 pages of reading material. https://leatherworker.net/forum/search/?&q=111w156&page=2&quick=1&item=132320&search_and_or=or&sortby=relevancy

I've seen leather dust mixed with cement to make a filler or packing for the back of 3D carvings.

That looks like a win to me. It's a pretty close clone of the Singer 111w156, if not identical. Parts and information are going to be abundant and easily found. Look for the user instructions. If the 156 isn't easily found, the 111w155 will be close enough for the oiling points. You know that journey of a thousand miles that begins with a single step? You just took that step. Welcome to the rabbit hole. EDIT: Here's the 156 manual. It'll get you started. 111w156.pdf

I cannot see how you mounted the lifter but what I can see is that the roller (224413) on the lifting rod (240550) is missing (isn´t it?) and the orientation of the "tab" is wrong. It has to be like the red frame IMO the longer end has to face right. Thats what I can tell the rest is trial and error where you put the foot lifter assy.

I am intrigued 🤔. This is something I have never heard of. So,the pieces are too small to make into other small saleable items ? Like using wood dust or wood particles i guess .So you use a binder like in particle board or chip board? HS

Thank you all for the input - that is wonderful news! Yes, I have the table, but it needs a thorough descaling, paint, and a new top. Bob, I will be ordering a Consew servo motor soon.

NO,don't ever take it apart,just oil everything & use it.It will loosen up as you use it.

great looking bag indeed. The only thing I would do is change that inner piece on the flap. What does it do?. I would either lose it or lengthen it all the way around,skive it down and trim it closer to the stitch line and stain it to match better. oh, and i would beef up your stitching on the strap ends, those take the most stress on the whole bag and will tear out if it gets too heavy. All in all, that is one nice-looking bag. I really like that leather, and your tooling is wonderful.

Advice: Do it with love and don't rush. Improve your level.

yes, along the entire length

You don't say how this would be carried. I'm guessing in maybe a briefcase rather than a pocket. Maybe 12 pens wide may be a bit unwieldy so maybe think about a staggered double decker. That would look cool. As for spacing, you have one pen. Is all you need, you can't cater for every size that's out there so just allow a little leeway. Ive just built a 56 loop bandolier and the loops were based on one shell case. Start with a pen and paper, it won't come to you immediately but it will come. Then maybe some card templates. Your pic shows a thing of beauty but doesn't tell all. Is the brown bit seperate and able to come out? If so maybe one green bit and two brown bits to cater for the 12 pens?

Ask the client to measure his pens.

Alrighty, it sounds like pre-bending is the way to go. Do you find that simply applying pressure with your hands when cementing the layers results in a strong enough bond? This was the only reason I had planned on gluing flat, that I have more confidence in the hold of the contact cement when it's had a little time with some weight applied to it while curing. You use the gun to wet mold the individual layers to the correct curve radius before glue up? That sounds like an excellent way of doing it. Do you leave the gun in the leather while it's drying like when doing final molding or do you just mold it to the proper curve, take the gun out and let it dry?

I'd wear it proudly if I were a lady May God bless, Dwight

All my holsters were made glued flat and then folded, it's inevitable that wrinkling will occur although sometimes it's possible to minimise them. The last holster I made was a SlimJim style and I wanted to carve it so used thicker leather for the outside but this time I tried pre-curving it while glueing to the inner (as Dwight suggested). It did make a neater finish although it was a bit more messing around getting it right.

That would be made by me using two molds. Both are 2 piece molds . . . one big enough for the pen body . . . the other one big enough to hold the total pen body. You might try making one big enough to put both pieces in there . . . that would alleviate any match-up problems later on. I'd then find out the dimensions of his pens . . . taking a decent picture of them . . . you can fairly accurately predict the size for each hole . . . and I would add a 1/16 to 1/8 inch to each hold just to make sure. Wooden dowels can be substituted for the real thing. And don't worry about the expense . . . if you do that right . . . I'm betting for more orders based on word of mouth . May God bless, Dwight

Yes . . . I totally pre bend my holsters that are lined. AND . . . you isolated the big reason . . . wrinkles. If you glue them flat . . . you have a 999 out of 1000 chance that the inside will wrinkle like the 98 yr old witch living down the road. I moisten and wet mold the inside piece . . . as it touches the weapon . . . so it needs it's positioning settled up front and wet molding it does that trick. I then let it dry . . . completely . . . At the same time . . . I will also wet mold the outer layer so that the sight track portion knows it is not laying flat the rest of it's life. It's only a so-so molding . . . just enough to set the curve for the final bonding. I do the same for the back flap of the holster . . . bending the inside piece before bonding with the outer piece. It makes for a much better curve for the flap. Concerning the weight . . . generally speaking the thicker the leather . . . the stiffer the final product. But that can also be achieved by cheating. Putting the two pieces together . . . and either slipping it thru the Mexican loops or adding the front buckle loop . . . you then wet the whole thing . . . and hang it in a 140 degree farenhite "hot box" . . . take it out after a couple hours . . . if it was made out of 5/6 or 7/8 . . . the holster itself is a weapon . . . you could knock someone out . . . banging them on the head with that holster. May God bless, Dwight

Hi everyone! I’m planning to make a 12-pen fountain pen case similar to the one in the attached photo, and I’m trying to figure out the best way to create the inner wooden form. For those of you who have made fountain pen cases before: Did you make your own or buy a wooden form somewhere? If you made it yourself, how did you determine the dimensions for the pen slots? I only have one fountain pen on hand (this is a commission), so I don’t have multiple pens to measure for variation in size. I’d really appreciate any advice on how you handled sizing when you didn’t have access to the client’s full collection. Thanks in advance!

Well, the good news is that you probably don't have to take it all apart. and you might just be able to oil it and go. Some pictures would help us to to evaluate it. Maybe a video walk around. Do you have the whole machine, table,motor and all? Or just a head unit? For starters, I'd oil it everywhere metal moves against metal. All the oiling points on top, everyplace underneath that a bushing, bearing or anything else moves metal on metal. Turn it over by hand and let it sit for a day. If you have the whole setup, motor and all try running it and give it a listen. When I got my first industrial, it turned over a lot harder than any domestic i had worked with. I had no idea how tight it should have been so I erred way on the side of caution and flushed PB Blaster through everything followed by sewing machine oil. Turned it endlessly by hand trying to decide if it was too tight. I removed the internal belt so I could evaluate the top and bottom separately. After a week or so of this activity, turned out it was fine to begin with.

After doing several holsters with different techniques I've settled on using a heavy weight for the outside layer for one reason only. I like to carve as deep as possible. For me, lighter weight leather doesn't give me the depth I like when carving and doesn't hold the carving as well after final forming and bending. My most recent holster was 8/9 outside and 3/4 inside. Forms great and is very stiff when dry. If your not carving the leather, any combination equaling 12oz is perfect.

Chris Andre does his with 2 layers of equal weight. I do this when I want a lined holster and I can say it is very stiff. My method is different than Dwight. I just glue 2 layers together and treat it as I would normally. I haven't read the article but I do know bianchi was a fan of using suede linings, in which case would be lighter in weight and adhered to the heavier holster body. I'd recommend 2 layers if 4/5 oz for owb and 3/4 for iwb.

Got a great deal on a Juki LU-563. Essentially a one-owner machine that has spent the last 10-15 years in storage. It is tight and free, but it will obviously need to be oiled and checked out before being put into use. Most of the discussions on this forum seem to deal with damaged or broken machines. This one appears to be in remarkably good condition. My question is: Does the machine need to be completely disassembled? I have not yet found a service manual, and I'm hoping not to have to take it apart using a parts diagram. Thanks in advance for thoughts on how to proceed.

Sorry, I unintendedly posted a duplicate post. The original has the pictures, but here they are again.

Thank you very much for the replies, everybody. Chuck, I agree that experimenting with different weights to find what works best is the way to go. I'll probably try to find a decent source for smaller panel-type cuts of Hermann Oak for trial holster purposes. Since I use leather around 4/5oz for shoulder holster straps, and the 8/9 or 9/10oz stuff for unlined holsters, about the only use I'll have for the medium weight stuff would be for the lined holsters, so I'd certainly like to find the ideal weight for it before I invest in multiple sides for lined holsters. ALZilla, I'm sure Mr. Nichols does recommend horsehide, for the reason that he's been fascinated by Seventrees holsters since roughly 1970, and Seventrees used horsehide nearly exclusively for their holsters. I've heard very interesting things about using horsehide for holsters, namely that the flesh side is nearly as smooth as the hair side, and that once a horsehide holster has been wet molded and dried it becomes about as rigid as kydex. I'd be interested to try it out if I could find a source for it. Mr. Tragacanth, I've never considered whether the mineral content of the water used for wet molding could have an effect on the rigidity of the leather, but it very well could. That'd be an interesting test, trying pieces from the same cut of leather using distilled, spring and tap water. Dwight, I was sure this was the case, but I'm very glad to get your opinion on the matter. I'm not really sure what happened there when Mr. Nichols wrote that passage, as he really is quite knowledgeable. That's why I wondered if there was some variable or combination of variables that caused this to be Mr. Nichols firsthand experience making lined holsters, but I'm not sure what that could be. In any case, I do have a few more questions for you about your process for making lined holsters. Do you find that pre-bending the outer layer before glue up as you describe gives you better results than gluing the layers flat and folding the holster afterwards? I had figured on gluing the layers flat and setting one of my granite tooling slabs on it while the contact cement cures, as I thought that weighing it down real good would help to create a stronger bond. But I know that a number of people pre-bend their lined holsters to prevent the liner layer from wrinkling when the holster is folded. Have you found wrinkling to be a problem when cementing the layers flat and bending the holster after the cement is cured? Also, regarding the weight of leather used, in reading some of your various older posts on this subject, I've read that you've used two layers of 4/5oz, 5/6 oz and 6/7 oz. Which of these weights do you find produces the best balance of stiffness and moldability for you?

Thank you, forgot that one. Finished it today.