immiketoo

If I had to start over knowing what I know now, I'd buy pre-letter craftool from the 50s and 60s. They are fine tools with crisp impressions.

Thanks, man. I have so much more than I ever needed, I just didn't know it at the time. On the plus side, I can now tool almost anything

I totally understand. I commented on your other post regarding tools and how to choose. Its a process, and you need to know what you're getting yourself into.

Rob, as a self admitted tool whore, I have a lot of experience with acquiring stamps. From top to bottom in terms of quality and price in my experience. Rober Beard - Blued tool steel, amazing smoothness and THE tool in figure carving for a variety of reasons. $50-120 Wayne Jueschke - un-coated tool steel (As good or better than Beard but limited to geometric and border stamps) $50-130 Barry King - Polished stainless: Barry has nearly everything you need and has recently ventured out into some figure carving tool. Awesome selection of geometric and BW tools. $30-85 Old Hackbarth - Polished stainless. Great tools from an old era. Hard to find. Expensive but great impressions. $40-65 Clay Miller - Polished stainless: Clay has a great line of tools, with great quality and impressions. Recently added a line of figure carving tools derived from Stohlman tools. $30-55 Craftool Pro - brushed stainless: Decent but very limited selection and generic shapes. Very limited geometric and BW $15-40 Pro LeatherCarvers - made by Jim Linnell's son. Stainless. Average impressions and alignment. limited selection. $35 Old pre -letter Craftool - Steel. Great quality tools, wide variety of shapes and sizes and PROPER figure carving shapes the way Al Stohlman designed them. $4-15 New Hackbarth - Steel. Seen them, don't see a lot of hype but good solid tools $??? Craft Japan - Decent chrome plated metal: A step up from the basic beginner sets, crisp impressions, fairly standard shapes. Good quality. $7-12 Current Craftool - Chrome plated metal: Some decent tools but inconsistent impressions and incorrect shapes for figure carving ok quality $4-7 Midas - Zinc alloy? Good tools, but very crafty shapes for the most part. Almost a novelty item, but I do use mine from time to time. $10-15 I started with cheap tools. I bent shafts, learned about uneven stamps, poor impressions and was generally unsatisfied with the results. Then one day I happened on Barry King tools and my eyes were opened. Bevelers that didn't leave chatter marks and could co around corners. Crisp impressions that aligned with the next one, etc. No bent tools, better knurling for better control. Then I took a few lessons from a Lady Named Silva Fox and she recommended a few tools from Bob Beard, and those literally changed my life. The things those few tools taught me (in addition to wanting more of them) are astounding. My skills improved at a much faster rate with good tools and I learned there was more than one way to use any given tool. I am speaking of figure carving tools by Bob, specifically. Smooth tools that allow me to mold leather how my mind sees it as opposed to how the tools sees it. With the right 15 to 30 tools, I can carve nearly anything, and I would sell all of my other possessions before I sold those handful of tools. The benefits to the higher price tag are that these tools cannot be found at any other level or maker. Its that simple. Now, all that being said, there are amazing artists using the most rudimentary tools available or some modified cheapo tools who pull off amazing feats with those tools. Tony Allen Bernier is one of them. Britt Nantz is another. At a certain level of experience, the tools almost don't matter as the artist can find or make tools to do what they want, complex geometric tools aside. Those are pure wizardry. However, there are many benefits to tools with expensive price tags. For example, consistency of impressions. Some low quality tools leave uneven impressions. So if you had a BW and you ran half your piece holding the tool one way, the pattern may spread, and if you turn it around, it may now converge on itself. This is maddening until you recognize it and learn how to deal with it. Other low quality tools have plating that can chip off, again affecting the impressions. Easy to fix, if you have to tools and know how. The single biggest reason to consider pro level tools, even bigger than the quality of the tool and its ease of use, is style. Pro tool makers focus on one thing. Making tools. Therefore, you have a much wider variety of tools available to you. There is some exclusivity at the higher price point and some tools cannot be found anywhere else. Developing my own style was important to me as I recognized early on I would not be satisfied by carving only Tandy/Stohlman patterns the rest of my life. I started leather work in Chicago, and there's literally nobody who wants the same tired floral/acanthus pattern you've seen a bazillion times since the 1960s on any items they purchase. While there may be a market for that sort of thing, I find it passe, as do my clients. Using a wide variety of tools that allow you to experiment with other ideas, requires tool shapes that can fit in delicate spaces, make impressions other than the standard beveler or pear shader, and help you develop your style. So, find someone who's work you like, and then find out how they do it. What tools are they using? How can you emulate it? Can you make due with what you have or do you need to look past the basics? The choice is up to you.

William Dawson once told me Perfect Pattern, Perfect Project. Its a mantra of his, actually. After struggling with drawing patterns for years, I learned just how true Bill's mantra was after Dave Skinner created a few patterns for me. Check out the teaser video for his upcoming class and join us on July 11, 2018 to learn just how easy it can be. https://attendee.gototraining.com/r/1501577032464758018

For the record, all of my classes are recorded as well and have been for over four years. In fact, Jim modeled his entire web based classes of of the learnleather.com model. I'll see what I can do, Bob. More like starting at 50 bucks and going up.

No worries, I used to be. Then I fell in love, retired and moved to the old country. Anything that involves something living other than plants is probably considered figure carving. There are as many debates about this as there are leather workers, but I classify them like this. Geometric and basketweave go together. Animals, people, and many logos and symbols fall into figure carving. Floral covers flowers, plants and acanthus. Pictorial covers scenery, mountains, trees, structures etc. Celtic could almost be its own category, although many viking images involve a bit of figure as well. There may be more I am forgetting and I'm sure others can fill in the blanks.

I'm international too. No worries.

I'll talk to him and see if I can't get my hands on a few for distribution.

The only place is from Bob. He does ship internationally. You'll have to call him or message him on FB. Problem is he's REALLY busy. Like think a year wait list.

Railrider, Thank you. In the video, I am using a steep figure beveler by Bob Beard. Its the only tool I've found with the right shape for this technique, although there may be others that can do the trick, or you may be able to modify your own to suit your style. I use B2 through B6. If you want to see a close up, let me know. Now, for figure carving, this is the single most useful technique I have, and now you have it too. You can use it to do 80% of your figure carving, and after that, the rest is easy. A little matting and some spoon work and you're well on your way to figure carving mastery. Also, there is NO reason to start with floral carving if you don't want to do floral carving. The techniques have some overlap, but generally, if you can carve a face, you can carve a flower. The converse isn't necessarily true as the beveling techniques are vastly different. Regarding the Eddie or any of the other faces I have done, its all the same as what in my video. This one has both celtic and figure carving with Odin and his crows. Celtic is a pain, but a few simple tips can help. Number one, always cut just outside your lines on knot work so you can see where you're going. Always maintain the same thickness on knot work or it looks bad. On intersections, how you bevel makes all the difference, and a standard steep beveler isn't enough. You will want a figure or shallower beveler to create the appearance of over under on you weave. If you're interested, I can put together a short segment on Celtic carving for you since it's not too complicated, you just need to follow the formula and pay attention to the details.

You can use a piece of steel. Many people do. The only issue with steel is that if you touch it with your hands it could leave black marks on your leather. You can clean these with oxalic acid but its easier to avoid than to fix. Now, I HATE counter tops because they are usually irregular, they are thin and prone to cracking if you ever need to walk something with a bit of force. I choose a surface plate. 3 inches thick, come in a variety of grades and sizes, and are frankly perfect for leather work. If you have the strength and space, a grave stone will also work wonderfully, but they're a pain to move around.

Ian Atkinson has a ton of good content. He is Leodis Leather on youtube. My site also has a lot of good stuff, www.learnleather.com.

Aside from the aforementioned cost issues, the real problem is finding someone who can print the file properly AND making certain the file is correct. Someone did a 3D gun for me and when I got it, the barrel was oval indicating the cloud file had been stretched on one axis. Without the gun or a proper mold, there is NO way to ensure that your 3D prop is correct. I'd hate to make a holster only to find out the gun didn't fit because of an altered file.

I agree. He is one of the coolest people I know. Well worth the time to watch. Serge is about as creative as they come. He puts an amazing amount of thought into his classes.

Thanks man, Serge is a master of unconventional thinking. Plus he's jut a cool dude to hang out with. This class is also about minimalism and making awesome things with limited tools.

It takes four times the planning and execution of normal BW, but its awesome looking and you can fit it anywhere.

Thats the only way. The reason most people use a camo tool at the edge of basketweave is to hide that faded from angling the tool. The only other way to get it to the edge is to hand carve your basketweave. Its a different look but its cool.

May sound silly but what about corn meal and super glue? Or something similar?

Hmmm...I never use edge paint as a single application, so I don't know. Maybe leather dust and glue? What are you making? And, I hate to ask, but are you hammering your seams? You are pretty accomplished, so I assume you are, but trying to help find a solution...

Pics would help diagnose what you're trying to achieve, but generally I try to avoid all gaps in edges that are glued before I start my edge finishing process. If there is a gap, edge paint generally covers what I need it to with a little work. If I really needed to, I may make a custom plug out of veg tan and fill the gap that way but that is fixing a problem that shouldn't exist.

Point is that I doubt other edge processes would hold up any better on soaked leather. Not buying a liter of anything you don't have a use for or a solid process in place with is good advice though!

I don't think that his tests invalidates the use of this product. I don't know ANY leather gear designed to stand up to what he did to it. I use the exact same process when I apply it, and it has stood up to all kinds of bending, folding and deliberate scratching. It doesn't come off. All I do for a finish is use RTC over the entire product, although its not necessary. Any leather product would fare poorly under the conditions you put it through. As a foot note, I don't use the top coat. Only the edge paint.

If you're using edge paint, I wouldn't use gum trag with it as theres nothing for the paint to stick to. In fact, I wouldn't use gum trag at all. Ever. So many better ways to get a good edge with leather. If you're using dye to color your edges, you can do it without trag. Apply dye, slick, wax, sand, repeat until smooth.

YEssir, its online as are all of my classes. Serge is going to make this one a lot of fun!