Stetson912

Howdy folks, I'm seriously considering a Barry king knife. I've sharpened my Tandy blades but they still don't cut well. So I figured I'd upgrade. Then I discovered all the many types of blades that are available just from Barry king. My question is, does each blade have a different purpose? Should I get a 1/4" or 3/8" or both, angled or straight, thick or thin, red or blue... Ok the last option was a joke but still, for a novice it's a daunting decision. I would like to have a variety of carving abilities from big western floral pieces to intricate Sheridan pieces. So my thoughts were getting a 1/2" or 5/8" barrel and a 3/8" and 1/4" thin straight blades (because that's what I'm used to) Thanks a mucho

Do you have any of stohlmans case making books? I'd recommend them. It really depends on the project, you could take a strap of leather you are using for the gusset and wrap it around the main panel of the bag to measure it. I would use a fabric tape and measure around the panel and then make a single gusset a little longer to trim later. A three piece gusset is might be easier. You could attach one side at a time and then you can stitch the sides to the bottom after. Skiving thick leather would help you bend over the edges 90degrees to attach to the bag face, in this case I would do the whole length of the gusset. As for the corners, if it's a real sharp corner you can't use a single gusset, but for round gentle corners you just have to stick it out and bend it around and try and keep it in place before stitching it. I recommend binder clips or contact cement or basting tape. Hope it helps.

I I'm not familiar with machines. I don't own one nor can use one I'm afraid. If you are infact referring to venator's pictures then please ignore this haha. And apologies if I overstepped my bounds here, I'm still trying to get used to the forum etiquette.

It is soft and nice leather. I also have trouble stitching thinner leather. I tend to over-tension it

This is my latest attempt. The alignment is off and the binding wasn't good either. It ended up being too short to cover enough of the edge to stitch right and it's a mess internally with the pockets. It's all 2/3 oz leather so maybe I need to use thicker leather for the back. Thanks also wrinkles on the face when folded which isn't fun.and cards don't fit in the pockets either... At least not easily haha But hey, live and learn.

I feel your pain, I'm no good at wallets, but Ill keep trying until I get it. It is frustrating but it'll pay off one day.

Sweet. Nice to see a fellow zona crafter.

I see what you mean by the turned edges. Looks good. Might be simpler that way than what I was thinking. Thanks!

Ah ok, so make a bag the same dimensions as the main bag? Then drop it in and stitch around the top? Yu our have trim pieces around the top of the liner which is a good idea I think. But that's the basic principles right?

Whoa, that's awesome. May I ask how you did the lining? I haven't made a bag before but I'm going to soon and that is the thing holding me up. You did a fantastic job on this bag.

As a matter of fact you can search Tanner's bond tape and that should bring up the product I'm thinking of. It's relatively cheap as well. Maybe someone else here has used it before and can enlighten us on how well it works?

I agree with Halitec. I've seen many people use seam tape with good success as a temporary hold for things like this. Double sided tape works ok too, as does contact cement. However, contact cement is pretty heavy duty and you'd have to be extra sure if your placement before stitching, I'm sure you already know that haha.

@garypl that looks great. I think I was over thinking it. The bag I'll be making will have a gusset but that shouldn't change things too much. Thanks for the pictures

Howdy all! I'm going to make a bag for my wife for our 3rd anniversary. The traditional gift is leather so a bag is obviously a fitting project. I had a lot from a popular retailer but before I knew what junk they are I had most of it together. The bag I'm going to make will use the same parts just better leather and I want to add welts and a nice fabric liner. So my question is, what's the best way to add the liner to keep it loose but secure and not glue it down? If I add welts can I put the liner in the welt to secure it (if that makes sense) or is my best bet to bind the edges and stitch the liner around the top of the bag? Thanks a bunch

I like the simplicity of all of them. I think the dye work on the top two is unique. I like the character it adds and will have to try it one day.