tat2

Hello everyone, I have a couple new Jack Saps recently made. We had been using steel shot to fill most of our Saps but recently began to change some of the design to steel plating. These two Saps are made with a steel plate 5mm thick. I used 6-7 oz leather and molded it over the plating, using belt strap for the handle which offers a snug fit around your hand. Oil Dye use and harness stitch with Black 277 bonded nylon thread. You wont have any issue being bullied or taken advantaged of with this Sap in your hand! I welcome your thoughts and feedback on these impact weapons.They are for sale on our website www.greenmanleather.ca http://www.greenmanleather.ca/all-jack-saps.php

http://www.greenmanleather.ca/skull-sporran.php here is a better image

Well done dude you work is OUTSTANDING!! your not cheeap just bloody creative!!!!

no worries I did not think anoyone would know but it was a shot in the DARK!! off the Pakistan I go!!! They have what I need and reasonable prices!

No one knows??? Off to Pakistan then, Found a supplier who is making mine with GML stamped on it!!! Ya'll give a holla if you need any supplies for construction pouches!!

Everyone has been Fabulous with sending in their orders! I still have 30 no.5 left and 45 no.8's

I wanted to sew on my Junker Ruh SD 28 so I made this knife Sheath. The sew lines are not to straight but it was worth trying it out.

Here is one of our new products coming out on Tuesday. Very simple design but stands out and quite manly! The Skull Day wear Sporran was made for man doing the highland games. he did not like the tassels moving around as well wanted something fierce and to intimidate the other partisipants. untitled.bmp

Hello Stephen here from www.greenmanleather.ca From Ontario! I am emailing off the LW site to let Junker Ruh SD 28 users know I found a person selling off a shoe business with a supply of Junker Ruh needles. I am working on a bulk order of Junker Ruh Needles. Found 5,6,8 Junker ruh needles. Not sure if you need any but do spread the word. I spoke with a couple folks who still have the machine but no needles to sew with. I know supply is short and 6 of us are buying as much as we can. Priced and sold in packs of 10's 120USD per 10 220USD per 20 Payment can be made through this email at gml-@sympatico.ca in USD. Our order is going in later on this afternoon today so have a think about it. FIRST COME FIRST SERVED! Stephen O'Ceallaigh www.greenmanleather.ca Email gml-@sympatico.ca Cell 647-637-5229

I see the construction tool pouches every day. SO I want to make one only I cannot find the tape measure clip and Electrical tape holder which is a chain a T bar. I appreciate any thoughts. Tries all the main places, like Weaver , Ohio Travel Bag ETC. Thanks for your help.

I see the construction tool pouches every day. SO I want to make one only I cannot find the tape measure clip and Electrical tape holder which is a chain a T bar. I appreciate any thoughts. Tries all the main places, like Weaver , Ohio Travel Bag ETC. Thanks for your help.

Hello Nathalie, the weight of the machine is 15 pounds and width of the bench machine is 7-8 inches wide. not including the handle of course!. I entertaining all offers as our Daughter was recently born and selling off items no longer needes. Let me know If I can help out in any way.

I'm eyeing this machine to buy, and I think its of german design as it has an adler shuttle configeration. Any thoughts would be appreciated! when I turn the hand crank the bottom pulls up needle then goes down and the top needle goes through the leather.

The 5 in 1 also was 1 one the first 1000 created as shown on the plate. The splitter in the image I have cleaned up and keeping So please do not ask! The 5 in 1 machine I wish to sell. I have never seen a 13 inch throat and its really big in size. Small amount of surface rust but it cleaned up rather nicely! Given the rarity of the machine and its size I was hoping to get at least 900 USD for it. But am open to reasonable offers. I have seen them sell for around this price but email your offer and we'll take it from there. One small thing is the machine did not come with a hand crank, rather it was broken. I called a supplier who makes the wooden handles metal bar in Texas. Cost would be 61USD plus shipping. So my thought is to offer 61 dollars towards the shipping given the machine should have the hand crank in order to operate properly. Please email me directly, Stephen gml-@sympatico.ca 647-637-5229

650 or OBO. I would interested in swapping but more happy with money in my pocket! I will ship anywhere in the world! email gml-@sympatico.ca 647-637-5229 Stephen

For Sale is a dbl lined leather creaser. I am not sure of the age but know it is from the 20th century, This creaser will crease strap work from 1/4 to 1.3/4 wide strap. the lines assist to use to line for stitching or simply for decorative design. It is in fine condition! your seeing saw dust on the machine .Everything works smoothly! Also has to keyed slots for embossing.email if you have any more questions, this machine IS hand crank operated! 900 or OBO. I would interested in swapping but more happy with money in my pocket! I will ship anywhere in the world! email gml-@sympatico.ca 647-637-5229 Stephen

Hello I have a 2.5 inch strap cutter for Sale. Its the smallest strap cutter I have ever seen. I used it for small strap work. blades are sharp too. I am open to what folks want to spend on this machine, it IS in excellent condition and has all original parts on the machine. if you have a Fenda or Landis 30 6 inch splitting machine I am open to trades. Please contact me directly: gml-@sympatico.ca 001-647-637-5229 Stephen strap cutter.htm

No need to be a wet blanket! Yes this IS a controversal product to make. There is no law stating one cannot make it, its using it which is a crime. look on the websites you"ll see many folks selling all kinds of Jack Saps. I think all have a right to use whatever means to ensure the safety of ourselves and those we love. Law or no law what you one do to protect which is most precious?? Anyhow since this listing has benn up I have had a bunch of orders!

Hello Everyone Stephen emailing from www.greenmanleather.ca. Over the past year I have received a huge demand to recreate a Pal Sap a like the one Chas Clements used to make. It is my pleasure to offer one to you today! The impact Palm measures about 2.5 wide and 1.2 inches high. Using a 3/8 thick piece of steel. This customer wanted his sap to be made with and Oak and Acorn hand tooled design. Many or you also has asked to me to make you one in the past and although I was reluctant to make a new model I thought email you all today and let you know GML is making this amazing Palm Sap. 75 USD plus shipping, or 2 for 135.00USD In about a month or so GML with be taking hte Saps of the site and setting up at our new domain www.jacksaps.com I look forward in hearing from you all again. As well if any have stories on how my products performed.

We have an extra Pearson 6 bobbin winder we would like to sell. It is missing the wax pot. works fine and still in excellent shape! please email us if you have any more questions! we are asking 400USD plus shipping. Email or PM only gml-@sympatico.ca Stephen

Art I have no clue what your talking about BUT: The creaser is still available and willing to haggle.

I agree, the stitch really is for decoration. I use Weavers strap stich edge guide for the Adler 205's and the belt is down in 4 mins. The dbl guide allow you to sew effortlessly! Cheating? possibly but worth the investment when you have mulitple orders. I would think if the stitch is set too tight/ close together you would weaken the belt and allow for tearing. Just make sure you test everything out first before sewing. The stitch did allow the belt to be stiff for a while then relaxed. The the stretch is based on the selection and grade of leather. Lastly make sure you are using a large bobbin machine or else the bobbin wil run out and you'll have to double up and at times can look unprofessional. At Green Man Leather we only use dbl shoulder or double Butt leather which is known for super strength and minimal stretch.

I recently bought a Singer 144w103 from www.keysew.com. It was for a customer , ordered it, made payment in full then customer stated it was not the machine for them. So Now www.greenmanleather.ca is the proud owner of a signature flatbed sewing machine. I am told it was rebuilt , repainted and in exceptional condition! I wanted to know who has one , what they sew with it , how do they find the machine in general, how it compares to other machines etc. I bought a bunch of extra parts of ebay this weekend. 794 needles available a Campbell Randall for 9.30 for 10 needles. Any how any more insigh on the machine would be very helpful. I am a cylinder arm user, Adler 205-64 and Pearson no.6 harness stitcher. So having this machine will be a lot of fun!