Frodo

Pledgedpatriot Go to a sheetmetal shop and tell them you want a strip of 16 gauge sheet metal1'' wide by 48'' long then bend the sheet metal in to the shape you want. I would use my file as a mold. drill holes, cut off the strip, round edges

Do not panic, Don't worry. I got your back. finish staining your project, then go get a sponge with that green scrubber thingy on it. cut a piece off, dip it in your stain, using the scrubby side, scrub the glue spot off, allow the stain in the sponge ono the work. you are inessence et sanding the leather. when yo see that the stain is now sticking, restain the piece to make it even first pic. i had stain on my fingers, this is where i wet sanded next pic. finished stain, the stain is gone

How come I was not issued a like button?

My AR , Broke out of the safe , Is holding the mausers hostage and threatened my life unless I built it a single point sling SARC/ little political humor. I made a single point for a friend . 8oz tan stain

if no rod like Chuck suggests get a round brass loop and heat beat it square

the surrounding material needs to be sewn for heavy canvas use a #22 needle and #138 thread for light canvas use a #20 needle and #69 or #92 thread if the canvas is a pvc or nylon canvas the hole needs to be singed before a rivet is inserted if it is a cotton /cloth canvas it needs to be sewn around the rivet to keep the material from shredding here is a rivet i removed from an italian holster you can see i singed the hole by heating a screwdriver and inserting it into the hole

what name caliber of rifle, i am sure some or me has something they did not lose in a boating accident

Tragic Fires in Aussie land.. A member on another site, posted this. FORGET the PAYPAL or any of that...I am not trying to scam money What I humbly ask is for you to help out sewing..I have sent her a PM as to the measurements for the pouches fabric or yard...

you know me..always trying ti reinvent the wheel this has probably already been done. but I have not seen it i see possibilities here. like a walking stick wrap. or a jar.

Short off topic commercial This message is for...............see the news BEEN THERE DONE DAT !!!!!!!!!

1.5 to 2 seconds. slow enough to control it

for needles and thread check with bantam   for parts, needles, thread,  and you can talk to them about needle /thread combinations I am currently on hold. i need some bearing sleeves for my pillow blocks

Tried to PM you It says that you do not accept messages.

Pm incoming

I need either a ''blue gun'' or a toy gun [cap gun] that is the same dimensions for a cowboy 45 long colt single action Or a holster pattern can anyone help a brother out? Cannot find a training colt on amazon.

My tale of wo I started smoking at the age of 14. I stopped smoking at the age of 50. This is how i managed to stop. It was Christmas eve, I was building a porch rail onto my house. I felt weak. my nail gun was heavy. so i decided to stop. I went to my Parents house and told my mom i was tired. needed to lay down. The rest of the story as told to me. I do not remember My sister said I got up and said i can not breath, then feel down. I was not breathing. an Ambulance was called. I was given oxygen At the ER. They cut my throat and inserted an airway. I died 2 times, Was jump started. 2 times I spent 2 months in a coma. then woke up I had the trach in my neck for 4 months. Till I threatened to rip it out. I have stage 4 severe COPD Memory lapse. and sometimes I can not find the correct word I know what the word is, but can not remember it Doc says it is due to lack of Oxygen. I LOVE metal work, running a forge I can not do that type of work anymore because of the fumes. This is why I got into leather work no fumes, I can work sitting down.

It was the needle depth . My needle was a tad long

A patcher machine. I can adjust the bobbin gear by one gear tooth and see if that helps

What is causing the skip stitch my bobbin is ''drop'' tested for correct tension top tension is the same as the bottom, as far as i can tell

https://www.amazon.com/Kiridashi-Pocket-Japanese-Handle-Sheath/dp/B079ZSDF5Y/ref=sr_1_124?keywords=crafts+knife&qid=1577545553&sr=8-124 a friend of mine gave me one of these. i cut through 4 layers of veg tan. 1/2'' thick. with 1 pass sharpest knife i have ever had in my hand.

yes, one complete turn of the handle is 1 stitch. here are my first sew samples. 9oz veg tan

I had another shaft made installed the shaft

here is a true story about a state mental hospital/prison we were breaking concrete in the break room. [for new plumbing] I huge sob walks up to a coke machine and puts his money in it. it ripped him off this dude bear hugged the machine, picked it up, and dropped it. his coke came out he laughed and walked off. I told my helper to go get my 24'' pipe wrench he asked why? I said if that crazy sob goes off. aint nothing else gonna stop him he had no idea how strong he was. looked like the guy on the green mile movie

I have always wanted to see that part of the country. That Butch gets Around. I renovated the Telluride co. Original bank into a coffee shop what we found was kinda cool. they had a big ass bank vault in the bank and a small safe hid in the back. The REAL money was kept in the little safe and day to day proceeds kept in the big vault. Butch Cassidy was said to have robbed that bank and only got the the money from the big vault