Jump to content

Leescustomleather

Members
 View Profile  See their activity

  • Posts

    120

  • Joined

  • Last visited

 Content Type 

Everything posted by Leescustomleather

  1. Leescustomleather
    My main goal in this construction was to have a sheath that the knife blade fit snugly, for positive retainment and also, I really like the way it feels.
  2. Leescustomleather
    This is just a mock-up but I think you can get the idea, it also minimizes contact of the knife handle with the beltloop
  3. Leescustomleather
    When accommodating a guard that large I will make the belt loop a separate piece, and then make a spacer from a couple of thicknesses of 9-10 oz Vegtan with the beltloop as the outer most piece and attach it that way. Love your work!!!
  4. Leescustomleather
    I put down some smooth soft wood like fir or pine and move it with the leather
  5. Leescustomleather
    If you have a drill press you can mount an awl blade in it with the motor off and use the leverage provided by the press to easily push the awl through, and as an added bonus it will go through perfectly straight. A little bees wax on the awl will make it easier to remove. I am a Bladesmith and have to pierce three layers of between 8 to 10 oz vegtan on a regular basis.
  6. Leescustomleather
    On a side note, vinegaroon will also darken some woods like oak and after a couple of months it will become less potent, and you can get some very nice gray colors from it for leather which I know of no other way to achieve
  7. Leescustomleather
    The chisel has 10 tines not nine that is your problem
  8. Leescustomleather
    I would line the jaws with some Vegtan to protect your work
  9. Leescustomleather
    Olivewood is quite dense and hard, so full stabilization isn't needed. Redwood burl is soft and can absorb moisture so to be used for knife scales really requires treatment, and thanks.
  10. Leescustomleather
    Thank you , I keep trying to improve my work.
  11. Leescustomleather
    Thanks
  12. Leescustomleather
    A little knife I finished today and liked how it came out. I hope this is ok to share, I am still pretty new.
  13. Leescustomleather
    If you really want to use a particular product buy some and try it in a spot that will be inconspicuous. I just checked my tin of saddle soap, and it says it cleans and renews leather furniture on the back. Not for suede.
  14. Leescustomleather
    Good for you
  15. Leescustomleather
    I think you can't go wrong with Feibing's saddle soap. Both clean and condition your leather at the same time
  16. Leescustomleather
    Nice knife, nice sheath! I struggled with getting my hole through the welt square to the edge also. I mounted a sewing awl blade in my drill press with the motor off and used the lever action of the drill press to easily push the awl blade through perpendicular to the edge, A little beeswax on the awl blade will help it to pull back out. Also, much easier on my hands too.
  17. Leescustomleather
    Thanks this is a scrap from an old saw blade, An unused plumbing fitting and a dead branch
  18. Leescustomleather
  19. Leescustomleather
    I needed a modeling spoon so I made one
  20. Leescustomleather
    Nice job, very clean.
  21. Leescustomleather
    You might want to check Goods Japan Website
  22. Leescustomleather
    Check out these, he is on Etsy LeatherStampsTools He has a lot of top-of-the-line tools, I own quite a few of them but have yet to spring for a swivel knife body. I realize that my comment is not very helpful but if you go look, I bet you will enjoy seeing what he has to offer. He is also a sponsor on this site
  23. Leescustomleather
    Edge paint and use a 1/8" metal rod to apply it. I use brass dip it into the paint and then rub/slide it along the edge. I will give you very fine control of where the paint goes. I know it sounds wierd, I learned it from A Japanese leather smith but I couldn't read his name
  24. Leescustomleather
    Great methodical approach, I imagine they will last a long time being made with such care.
  25. Leescustomleather
    I'm glad you found the solution, thanks for sharing!
×
×
  • Create New...