Members Bert03241 Posted June 14, 2023 Members Report Posted June 14, 2023 masking will make a huge difference in the afterburn and very little clean up if any. Quote
Members Dwight Posted June 14, 2023 Members Report Posted June 14, 2023 1 hour ago, Bert03241 said: masking will make a huge difference in the afterburn and very little clean up if any. Are you saying cover the area with masking tape??? May God bless, Dwight Quote If you can breathe, . . . thank God. If you can read, . . . thank a teacher. If you are reading this in English, . . . thank a veteran. www.dwightsgunleather.com
Members Bert03241 Posted June 14, 2023 Members Report Posted June 14, 2023 41 minutes ago, Dwight said: Are you saying cover the area with masking tape??? May God bless, Dwight they have masking for leather laser engraving . https://www.jpplus.com/paper-masking-for-laser-engraving?sku=LASGLASS-RL&gclid=CjwKCAjwyqWkBhBMEiwAp2yUFl8C-m5maK7vB28ItOYHTHuE8oFPygbYEku18pAWWlNt5BfUYe5HThoCsTwQAvD_BwE But I usually put 2 coats of sheen or resoleane on before engraving , then 99% of the residue wipes off with a damp rag Quote
Members ArkieNewbie Posted June 15, 2023 Author Members Report Posted June 15, 2023 20 hours ago, Bert03241 said: they have masking for leather laser engraving . https://www.jpplus.com/paper-masking-for-laser-engraving?sku=LASGLASS-RL&gclid=CjwKCAjwyqWkBhBMEiwAp2yUFl8C-m5maK7vB28ItOYHTHuE8oFPygbYEku18pAWWlNt5BfUYe5HThoCsTwQAvD_BwE But I usually put 2 coats of sheen or resoleane on before engraving , then 99% of the residue wipes off with a damp rag I'm going to have to look into that!! Engraved these last night. Did this on my Atomstack A30 Pro. That thing is a beast! Quote
Members KYCat Posted June 16, 2023 Members Report Posted June 16, 2023 On 6/14/2023 at 2:10 PM, Bert03241 said: they have masking for leather laser engraving . https://www.jpplus.com/paper-masking-for-laser-engraving?sku=LASGLASS-RL&gclid=CjwKCAjwyqWkBhBMEiwAp2yUFl8C-m5maK7vB28ItOYHTHuE8oFPygbYEku18pAWWlNt5BfUYe5HThoCsTwQAvD_BwE But I usually put 2 coats of sheen or resoleane on before engraving , then 99% of the residue wipes off with a damp rag I haven't tried the resolene but did try blue painters tape as a mask and it was a PAIN to weed off the more detailed areas. Won't be doing that again!! Quote
Members Bert03241 Posted June 16, 2023 Members Report Posted June 16, 2023 yes if theres a lot of small detailed areas weeding is a pain, thats why I prefer a couple coats of sheen or resoleane or 50-50 mop& glo just wipe off with a damp rag Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.