RockRash Report post Posted December 30, 2023 I have been wanting to make a round knife sheath for a while now. I decided to try out some new stamps and airbrush I got for Christmas and I came up with this. Quote Share this post Link to post Share on other sites
DieselTech Report post Posted December 30, 2023 Nice looking sheath! Love the tool work. May I ask, what brand is your leather knife? Thanks. Quote Share this post Link to post Share on other sites
bladegrinder Report post Posted December 30, 2023 Nice work but who made it? the makers name has been photo cropped out. Quote Share this post Link to post Share on other sites
RockRash Report post Posted December 30, 2023 14 minutes ago, DieselTech said: Nice looking sheath! Love the tool work. May I ask, what brand is your leather knife? Thanks. Thanks. The knife is the small round knife makers leather supply sells. I'm no expert (this is my first round knife) and I know I need more time using it. This particular knife doesn't feel all that comfortable. This was the only knife I used for this project , I want to get proficient with it. If I could go back I'd order a larger knife. This one is so small ive ended up cutting myself a few times because my fingers are so close to end of the blade. Reference photo Quote Share this post Link to post Share on other sites
RockRash Report post Posted December 30, 2023 7 minutes ago, bladegrinder said: Nice work but who made it? the makers name has been photo cropped out. I did lol. I just do this as a hobby and my wife got me the makers mark for Christmas. It has my real name on it and call me paranoid ( I probably am over paranoid) I dont want my real name on a public forum. Quote Share this post Link to post Share on other sites
bladegrinder Report post Posted December 30, 2023 I gotcha, nothing wrong with that in the world we live in today. Quote Share this post Link to post Share on other sites
MarshalWill Report post Posted December 30, 2023 Looks good. I like the way it fits under the welt. Quote Share this post Link to post Share on other sites
DieselTech Report post Posted December 30, 2023 1 hour ago, RockRash said: Thanks. The knife is the small round knife makers leather supply sells. I'm no expert (this is my first round knife) and I know I need more time using it. This particular knife doesn't feel all that comfortable. This was the only knife I used for this project , I want to get proficient with it. If I could go back I'd order a larger knife. This one is so small ive ended up cutting myself a few times because my fingers are so close to end of the blade. Reference photo Thanks RockRash I appreciate it. Looks like a nice knife. What does it measure from tip to tip if you dont mind? Thanks. Quote Share this post Link to post Share on other sites
RockRash Report post Posted December 30, 2023 22 minutes ago, DieselTech said: Thanks RockRash I appreciate it. Looks like a nice knife. What does it measure from tip to tip if you dont mind? Thanks. Looks like 2 3/4" Quote Share this post Link to post Share on other sites
DieselTech Report post Posted December 30, 2023 45 minutes ago, RockRash said: Looks like 2 3/4" Thanks very much. I have been looking for a small head knife & that is perfect for me. Thanks again. Quote Share this post Link to post Share on other sites
RockRash Report post Posted December 30, 2023 (edited) 2 hours ago, MarshalWill said: Looks good. I like the way it fits under the welt. Thank you. I have seen it done before and always liked the idea. I will say its very satisfying sliding it in the sheath and snapping the snap. 1 hour ago, DieselTech said: Thanks very much. I have been looking for a small head knife & that is perfect for me. Thanks again. 2 hours ago, MarshalWill said: Diesel Tech, it's a great knife, very sharp from makers. I'm sure my complaints are my lack of experience with it. ETA: sorry I screwed up the quote. Edited December 30, 2023 by RockRash Quote Share this post Link to post Share on other sites
BigBore Report post Posted December 30, 2023 Very nice! ‘Sharp’ looking project! Quote Share this post Link to post Share on other sites
chuck123wapati Report post Posted December 30, 2023 nice work indeed!!! Quote Share this post Link to post Share on other sites
rleather Report post Posted December 30, 2023 Really nice work on the stamping ! I like the way you used the border stamps. The back looks every bit as nice as the front. Nice work! Quote Share this post Link to post Share on other sites
Doc Reaper Report post Posted December 30, 2023 I like the work, scared of all that blade Quote Share this post Link to post Share on other sites
MarshalWill Report post Posted December 30, 2023 That one's only 2-3/4" across, just the right size. Besides, those blades don't getcha much once you get used to them. Getting used to them can be a challenge, though... Quote Share this post Link to post Share on other sites
dikman Report post Posted December 30, 2023 Very nice job on the sheath. As for the blade size, I made a small round knife from a worn out half-round blade from my multi-tool (so it's about the same size as yours but a bit thinner) and I find it a nice size to use. Quote Share this post Link to post Share on other sites
DieselTech Report post Posted December 30, 2023 13 hours ago, RockRash said: Thank you. I have seen it done before and always liked the idea. I will say its very satisfying sliding it in the sheath and snapping the snap. Diesel Tech, it's a great knife, very sharp from makers. I'm sure my complaints are my lack of experience with it. ETA: sorry I screwed up the quote. Went to order that knife this morning. Dang it! Wouldn't you know it was sold out. Sold out over night. Dang it. Quote Share this post Link to post Share on other sites
RockRash Report post Posted December 31, 2023 13 hours ago, BigBore said: Very nice! ‘Sharp’ looking project! 13 hours ago, chuck123wapati said: nice work indeed!!! 12 hours ago, rleather said: Really nice work on the stamping ! I like the way you used the border stamps. The back looks every bit as nice as the front. Nice work! 7 hours ago, Doc Reaper said: I like the work, scared of all that blade Thanks! 6 hours ago, MarshalWill said: That one's only 2-3/4" across, just the right size. Besides, those blades don't getcha much once you get used to them. Getting used to them can be a challenge, though... 5 hours ago, dikman said: Very nice job on the sheath. As for the blade size, I made a small round knife from a worn out half-round blade from my multi-tool (so it's about the same size as yours but a bit thinner) and I find it a nice size to use. It's a great size and knife. I just need more time behind it. I'm planning on using it a lot on my net few projects so I can get more comfortable with it. 5 hours ago, DieselTech said: Went to order that knife this morning. Dang it! Wouldn't you know it was sold out. Sold out over night. Dang it. Diesel Tech, keep checking back his inventory seems to be resupplied fairly quickly. I had the same thing happen a while back with his buck stitching chisels. Quote Share this post Link to post Share on other sites
jrdunn Report post Posted December 31, 2023 22 hours ago, RockRash said: I did lol. I just do this as a hobby and my wife got me the makers mark for Christmas. It has my real name on it and call me paranoid ( I probably am over paranoid) I dont want my real name on a public forum. My therapist says "Just because you're paranoid doesn't mean that everyone isn't out to get you." Quote Share this post Link to post Share on other sites
RockRash Report post Posted December 31, 2023 2 hours ago, jrdunn said: My therapist says "Just because you're paranoid doesn't mean that everyone isn't out to get you." It's a frustrating situation. Lol Quote Share this post Link to post Share on other sites
