List of Members sewing machines

[dikman]

Always nice getting a new toy.

[chrisash]

Will this be a new skill to learn,

Darn things sew a 100% straight line when you practice, then have a mind of there own when on your good item

[MisterSmith]

I recently picked up a TECHSew 2750, and its proved very versatile. It’s has sufficient attachment and options that it will satisfy a variety of projects

[Wizcrafts]

Okay, I'll join the foray.

I currently have the following machines, some of which are used every day and others less frequently.

• Cowboy CB4500 (w/accessory pack). Used daily to sew everything from thick belts to holsters and other bulky items.
• Singer 139w109, a long body walking foot machine used daily to sew thinner goods with #92 thread. Used for patches on vests that are not over a pocket.
• Singer 111w103, a standard body walking foot machine that we bought out of a customer's car. It is a backup machine threaded with #69 thread. Used for thinnest leather jobs.
• Singer 42-5, a spring foot machine from the Roaring 20s. I use it occasionally to hem chaps, close the bottom of jackets and vests and some upholstery jobs.
• Singer 29k71, a small bobbin, short arm patcher on a treadle stand. Used almost daily to sew patches over pockets, repair purses and bags, go over loose threads on wallet interiors, etc. It is only used with #69 thread to minimize wear.
• Adler 30-7 patcher. This is a high lift, big bobbin patch machine on a motorized base. It is usually threaded with #92 thread, but occasionally I load 138 into it for heavier jobs. This is a go to repairs machine that is also used to sew cylindrical objects (e.d., dice cups).
• Singer 168G101, a 7" post machine with compound feed walking feet. It uses the same feet, bobbins and needles as the Singer 111w103. I use it to repair hats, to sew embroidered patches onto hats and to sew along the bottom of bags. It is usually threaded with #138 thread, but can handle #207 flawlessly (it was preset for 207).
• Singer 31-15, a bottom feed tailoring machine from the Roaring 20s. I thread it with #69 bonded, or standard cotton or poly-core garment thread. I use it to sew linings for vests and jackets, and to sew cloth projects. Rarely used, it shares the table with the 111w103. I have all manner of accessory feet and folders for this machine.
• Pfaff 4 thread, 2 needle serger. Used rarely to close and protect edges of linings, denim and other cloth that tends to run. Indispensable in a sewing room.
• Consew blind stitch machine. Used rarely on cloth pants and skirts for taking up and re-hemming.

I should mention that my Dad was a tailor all his life and taught me to sew on his Singer 31-15, which he bought new from Singer in the 1920s or 30s.

[Big Sioux Saddlery]

5 hours ago, chrisash said:

Will this be a new skill to learn,

Darn things sew a 100% straight line when you practice, then have a mind of there own when on your good item

"They all sew scrap!"  Quote from the best heavy stitcher mechanic I know.

Well, I guess since I am a machine and tool hoarder, I want to play too.  My list of current machines, most of which WILL sew, but not necessarily used every day:

• Landis One (x 4):   Yes I like these machines, possibly because it was the first heavy stitcher that I purchased when starting out that would actually do what the seller claimed it would do.  Used one exclusively for my first 15 years in business. Vintage (early 1900's) stitcher for heavy harness and saddlery items, I have used down to a 207 and sewed 9 to the inch, but overall they do best with a 277 or 346 and 5-8 spi.  Threaded needle machine.  Will sew close to an an inch thick
• Landis 3: Haven't used it much yet, was gifted to me by a dear friend when he found out he was terminally ill.  I had tried to buy if off him for years.  Used for much the same as above machine. Hook and Awl machine, vintage, again early 1900's, but not as early as the Landis Ones.  Will sew 3/4"
• Landis 16: Another hook and awl machine, came along after the Landis 3's, although I believe they were in production at the same time for a while(?). Completely different type of machine than the 3, even though it is a hook and awl.  Used for heavy work also. Will sew 3/4" +.
• Randall:  similar in style to the Landis 3, but preceded the 3 in production.  I believe the Randall and Campbell machines were in production before the turn of the century.  Hook and awl, more suited to finer work than the previously mentioned machines, 3/4" is absolutely maxxing this machine out, unless it is a High-lift model.  The stitch made by this type of machine has never been duplicated.  Cadillac of heavy stitchers. 
• Union Lockstitch:  Another heavy hook and awl stitcher, more of a high speed production machine.  Sews 3/4" . Finicky and fickle, I don't even attempt to sew smaller projects.  I need to have at least a set of 4 harness tugs to sew before I'll fire this one up.
• American Straight Needle: Intended as a machine for side seaming cowboy boots, it was marketed as able to also stitch soles and do harness work.  It is a compromise at best for harness work, having a narrow 4" throat.  Smooth running machine that will throw a pretty nice stitch when everything is right. 
• Cowboy 4500:  Enough has been said about these that I don't need to be redundant.  Versatile machine, but you know what they say about a Jack of all trades!  I bought it specifically to sew Biothane harness.  Beyond that, although I use it often, I could get along without it if working only with leather.
• Ferdinand Bull 900: Came in a shop buyout, sure glad I didn't buy a new one back in '91 when I was starting out.  Threaded needle, heavy stitcher, doesn't even come close to being the machine the vintage heavy stitchers are.
• Juki LU-563: Flatbed light stitcher, 3/8" max lift, run 138 or lighter thread, although I have run 207. 
• Patch machine: not even sure of make or model because it had been repainted and no decals when I bought it.  Sews good, but I have limited use for it.  Came in a package deal
• Singer 29-4 Patch machine:  doesn't sew for more than 5 or 6 stitches.  Came in another package deal, otherwise would never have gone out looking for one of these.
• American Curve Needle: Hook and awl, for sewing soles on boots.  I don't build boots, came in another buyout.
• Landis Curve Needle: Ditto of American Curve Needle. 

I think that's all of them.

[dikman]

Wiz, that Singer 168G101 sounds really interesting.

[Hildebrand]

I have a well used Tippmann Boss that I sew holsters and belts with.  I have not convinced the finance committee(wife) that I really need a Cowboy 4500 for my hobby but I am still trying.

[Wizcrafts]

2 hours ago, dikman said:

Wiz, that Singer 168G101 sounds really interesting.

Indeed! It is unlike most other post machines I have had. It may have been transported here through the Stargate.

[Mark842]

I jump in also

• Cobra 4 (x2) My main work horses. I have one set up for sewing heavy latigo items about 1/2" thick. The other I use for sewing foam and Kydex to leather..lighter duty stuff.
• Consew 229R-1 Post bed...bag duty
• Consew 206rb-1 Medium duty. Most of what I do with this is max 8-10 ounce oil tanned leather
• Singer 112W116 double needle. Decorative double stitch lines on belts, bag lids, etc
• Singer 29K31 Patcher goes on location to rallies/shows for sewing on patches
• Adler 30-7 Patcher, same as above and sewing lengthwise across the bottom of tool roll bags
• Juki DLN 5410 non leather medium fabric work that requires higher speed
• Junker & Ruh sd28 bought it to sit on a shelf and look cool but it actually works and I've stitched some soles with it
• Landis One  newest addition. Just picked it up in working order. Had been sitting collecting dust for 50 years. Restoration coming this winter. Another one that I purchased for the cool factor but after cleaning it up and lubing it up, I ran a line of stitching down some 10 ounce latigo using the old twine that it was still threaded with. I produces an incredibly nice tight stitch. I will be adapting it to sew with threads in the 207 to 346 range

[DonInReno]

17 hours ago, bikermutt07 said:

On the topic, I get to pick up a consew 206rb-1 with a new table and servo on Wednesday. Yeeeeehaaaaaaawwwww

That’s cool!