Members hashtagartz Posted February 25, 2021 Members Report Posted February 25, 2021 I am making a holster for a Hellcat with a micro red dot sight mounted on the slide. I currently have a mold for the hellcat but not he sight. I tried looking to see if one can buy a mold for the sight with no luck. any suggestions. I thought about 3d printing but not sure how to get the pattern to do it. Thanks Jacob Quote
CFM chuck123wapati Posted February 25, 2021 CFM Report Posted February 25, 2021 my first thought was to make one out of wood then i thought maybe some of that oven bake clay stuff my kids do awesome stuff with it. Quote
Members hashtagartz Posted February 26, 2021 Author Members Report Posted February 26, 2021 20 hours ago, chuck123wapati said: my first thought was to make one out of wood then i thought maybe some of that oven bake clay stuff my kids do awesome stuff with it. thanks! The clay may be the answer! Quote
MikeRock Posted February 26, 2021 Report Posted February 26, 2021 Sculpey clay is the ticket! It has very low shrinkage. https://www.sculpey.com Quote
Contributing Member fredk Posted February 27, 2021 Contributing Member Report Posted February 27, 2021 Will your blue gun withstand the 130 to 150 degrees needed to bake the polymer clay? [aka Sculpey and FIMO] Quote
Members chrisash Posted February 27, 2021 Members Report Posted February 27, 2021 This Fusion 360 video may give you some idea's if you can take photos of the original from there axis you can get a good 3D model for a 3d printer to make or if no printer there may be someone else who could make it for you (1) How to Create a CAD Model from a Photo in Fusion 360! FF96 - YouTube Quote
CFM chuck123wapati Posted February 27, 2021 CFM Report Posted February 27, 2021 4 hours ago, fredk said: Will your blue gun withstand the 130 to 150 degrees needed to bake the polymer clay? [aka Sculpey and FIMO] i dont think you would need to bake the blue gun. just make it to be attached with double stick tape Quote
Members chiefjason Posted February 28, 2021 Members Report Posted February 28, 2021 Sight? On the top? You don't need anything. Just keep the leather out of the way. If it's a red dot sight you are over thinking this whole process. If it's a laser/light then check ebay for used models. Quote
CFM Frodo Posted February 28, 2021 CFM Report Posted February 28, 2021 dowel rod and electrical tape Quote
Members Brooks125 Posted March 2, 2021 Members Report Posted March 2, 2021 On 2/28/2021 at 12:03 PM, Frodo said: dowel rod and electrical tape ... or not. If your putting a sight rail in, just extend the dowel out the back. Done right, I think that would turn out very nice! Of course, you may end up filing the sight off you Blue Gun to do that. (You know, you have to post pictures when you finish it now!) Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.