All Activity

I moved your post to stamping

For sale items should go in the marketplace. This is unusual to be posting for someone else. I'm moving it to the marketplace. See the marketplace rules here https://leatherworker.net/forum/forum/70-announcements/

Some machines have a screw that locks the hinge to the machine base. Stops the machine from sliding around when tilted. Have a closer look at your machine and the type of hinge it uses. Maybe you will have an easy fix.

I'm interested in one of them - I live pretty close

Here is a knife sheath I cut out and scored the pattern with my S1 40w, then tooled it. Not the prettiest but it was my first shot at using the laser to score the pattern instead of using a pattern and transferring with a stylus. Also used the shape tool to make the belt loops - not the final shape, but again, for an experiment it didnt turn out too bad.

I moved your post to Leather Sewing Machines since you want to learn how sewing machines work. This is the place!

Greetings and Happy Holidays to all I am trying to learn how to machine sew, in that effort I bought an old domestic machine. A true leather sewing machine is too expensive for me to experiment and find out if I’m able to machine sew at all. I probably overpaid for a Pfaff 332 but don’t regret it. I did fall for the vintage machine thing as I later fell for a 130 of the same brand which was in shambles, but was able to bring back to life. This latter one actually sews while the 332 I have yet to bring to full operational status. I’ll admit it, I then grabbed a 260 which is also in very sad shape and awaits in the shed for a spring makeover. This 260 I feel was a good deal as was the 130, though admittedly I’m no expert. I would like to know if someone can tell me if there might be a way to reign in and better control the speed on my old yet spirited 130. I’m trying to design a specialized bag which she might be able to sew. Other than that, at this time I make coin and card holders which is what, like many others I suppose, I’ve started my leather making/playing with. I hope to eventually buy a used leather capable machine which is my other question. Where in your site may I find used leather sewing machines for sale? TIA for your help and time. Mario

I've read about this drop test but it never occurred to me that the bobbin must be different to be able to do it. I always go with a try first. Because my hobby uses different types and thicknesses of leather I'll always test on a bit of scrap first to check tension and needle size. I'll always use the 45 degree slide test as a starting point for needle size and adjust if necessary.

Beautiful job! Mine is still in its battered old grey paint - having restored a machine once I'm in no hurry to do it again!! Mine had the cutter assembly which I removed.

With "older" machines the rest (which is what it is) is made of wood and just pushes into the hole in the table, I've made my own from a broomstick handle. If you think it's too high you could cut it down or once you get it out try making a couple of replacements at different heights to see which works best.

You can disconnect the belt while you diagnose.

great work

made a leather card holder for a friend for christmas, different to what was going to do. leather did not want to allow me to transfer image, even when I tried cutting into leather was hard to see the lines with the fuzz part so just make outline stincel traced out before adding all the detailing in by hand.

these original manuals pop up every now and then. i just recently bought two from a guy in France he still has some: https://www.ebay.de/sch/i.html?ssPageName=&_ssn=zougoulouba

Do u have the same skiver?

Anybody care to measure the distance from the hinge line to the tilt stump on their machine? My working hypothesis is that a tilt stump too close the the hinge axis will lift the machine off its hinges. For reference, this is the hinge type on the table. I have not personally owned this style of hinge. It appears that even with the machine head tilted back, the hinge can still be pulled straight out of the table. But I suspect that is true of this other style as well:

Well if anyone needs a scanned copy, or the actual books, they can message me details.

Guessing - most likely a motor problem. I guess the machine has a servo motor so I would guess the lever of the accelerator unit or the hall sensor is loose / has moved and is probably stuck in the "run" position. Please post some pictures of your motor and the accelerator unit and lever where the it man rod is attached and maybe a video showing the issue (please not just 5 second video or so" upload it to YT and post a link here.

Hi I talked to Eli today over at Landis Machine Co was making sure he received a check that I sent him for a part for my Landis 16. I am posting this on here for Eli. He said he has two Landis 16 for sale he went through these machines and they are ready to sew and he is selling them for one of his customers. I told him to send me the photos and I would post them on here for him. Eli is a really good guy and one of the only people that has parts and can fix these old Landis 16. I sent him my Landis 16 and she is sewing a beautiful stitch. Give him a call if you are interested. The one machine is $1,800.00 and the other is $2,400.00. Here is Eli contact info. I was not sure where to post this one. Landis Machine Co 6373 Country Road 400 N. McLeansboro IL 62859 for pickup. Phone # 217-543-3464

yeah - keep that old cast iron alive - I seldom went wrong with that! 😉 I love my 51w but the 2nd type as yours would be even more preferred but I love mine too. Singer crazy me is. 😁

@FDC Sweet!

It is my understanding that the fridge isnt doing anything for keeping moisture in. Its the bag. The fridge just delays molding. If youre doing a project that you'll have to come back too a bag should suffice fine. If it will be a few days then I'd stick it in the fridge. Peter main has a bigh sheet of tempered glass he uses. He would wet the leather and stick the glass on top and it would stay cased as long as he needed it too right on his bench. I believe this works because Moisture isnt lost much through the edges but the grain. Thats just my theory though

This a typical location for the "tilt stump". Typically just made of plastic, pressure fitted into a hole drilled into the table top and meant as a temporary rest. The machine " slithered off the table hinge and into the drip pan " indicates to me incorrect / damaged hinge and or hinge installation. I have never had a head slip off and with my stubby fingers I am also titling my flatbed machines back to install / remove bobbins. kgg

I have a fairly new (2years) CB3500 that hasn't gotten a lot of use recently due to health issues. I've finally felt like doing a couple of projects and when I was going through the maintenance points I simply turned the power on and the machine takes off. The foot petal is 'up' and the arm in the motor is 'up' where there should be no stitching. There's a grinding noise coming from the motor when I turn the handwheel so it's not in the head unit. Any ideas on what caused this and how to fix? Thanks!!!

This machine would definitely do the job for you. The learning curve on my skiver was a bit steep but patience and lots of trial work. I'd label each control on the machine as soon as you get it as this helps when tweaking it!