camano ridge

Standing Bear Trading Post Reseda CA www.sbearstradingpost.com About 40 miles from Anaheim.

Check these folks out blackriverlaser.com they make the samps out of Derlin it is cheaper then metal but holds up well. They do custom work and their prices are very reasonable. Their site only shows the templates you will need to call them to find out about pricing for what you need. They are great to work with.

Glock 21 is sold. The other two are still available.

I have a few dummy guns for sale HK USP 45 Duncan, Glock 21 Rings, Polish P64 9mm (similar to walther PPK)Rings $30.00ea plus $5.00 shipping all 3 $95.00 shipped.Payment by paypal only. Post her if interested and PM me with your email I will give you my paypal address. Scott

Slickbald is a member who frequents this forum, he has Makers Leather Supply. They have a pancake holster pattern master pack for $16.00 contains a small medium and large pancake pattern with full instructions. You can adjust the stitch lines to your model of pistol. http://www.slickbaldcustoms.com/ click on products. Scott

He may have been reffering to the Tippmann Aerostitch, it is pneumatic and does have foot pedals. I am not sure how you would convert the Boss to foot operation. I attached a page from the aerostitch manual that shows a stand and foot pedals. Scott

I'm not Kevin but here is Eds Face book page, address of gallery of Eds work and his email address. http://www.facebook.com/edbearman.bearmauls http://tinyurl.com/BearMauls PolarB1717@aol.com kodiak50004@aol.com (This is Beary's email Ed's son. He also does the mauls and burnishers. Here are pictures of the mauls I got from ED. Pure quality. Scott

Here is the page for MSC they do sell just the mallet faces, however the faces will probably cost as much or more then a new one at harbor freight. MSC lists 191 mallet faces if you know the brand they can probably help you. http://www1.mscdirect.com/eCommerce/NavigationServlet/Hand-Tools/Hammers-Striking-Demolition-Tools/Hammers-Mallets/Replacement-Handles-Heads-Faces/Replacement-Heads-Faces/_/N-77f29?refinement=4290221656&searchandizedOk=Y I second the Bearman Mauls

I will take the Diamond Back 380 (Duncan) Diamond Back 9mm and SW Bodyguard(rings) If still available. Scott

Thanks, Sylvia and everyone else for your replies. After a bit of research and following up some leads I found a Tandy who's manager says he specializes in kepping in stock discontinued items. (not sure how he does that). He had a few packs of what I was looking for so now I have more then enough. Thanks again for your help. Scott

Has anybody registered a domain name and or setup a web site through Go daddy.com? What was your experience? Scott

Here is a thread that discusses making stamps: http://leatherworker.net/forum/index.php?showtopic=10252&st=60. I have also attached some pages showing diffrent stamps made from bolts using files no grinder.

Do you use Neutral Kiwi on top of the MPB or do you just use the MPB and leave it at that?

Thank you for your response, Michaels and Joanne fabrics both show them on there web site I went to two Michaels and a Joanne fabrics neither store had them. I have checked ebay with no luck. I found several places on the web site however when I contacted them they all said they could no longer get them from there suppliers. The store manager Of my local Tandy said they have not had them for a couple of years.

Montana Pitch blend web site shows several products is it the MPB cream that you use and does the pine smell go away? Scott

Looking for double cap rivets with flower on cap. I did seach on web found a few places that showed them but no one has them in stock. If anyone knows where I can get some or has some they would like to sell let me know. Scott

One method that works well is to measure and mark your belt slot, punch an appropriate size hole ( 3/8" works well) at each end of the slot, connect the slots using a wood chisel. If the inside of the slot needs smoothing use a small sanding drum on a dremel.

If you have not done so already you might post this on cacity.com there is a wildbunch forum and a forum that deals with uniforms and period correct clothing. I think you will be a ble to get some help over their as well. Not that you won't get help here it is just that those forums are specific to what you are looking for.

Still invisible.

Don't know how close to Dartmouth you are, there is a tandy store in Dartmouth they would have those books in stock. If you can't get to the store call them they should be able to mail direct from their store to you.

For future reference you might want to check out this site it shows Big game cartridge belts and price info. http://www.murraycustomleather.com/belts.htm

Back to the origin of this thread. I like the holster, looks good. Scott

I have to agree it is some what a matter of pride. I could take a piece of scrap leather wrap it around the pistol for size, stitch a seam down the side and have a plain jane cheap pouch type pocket holster done in a bout 15 minutes. But what fun is that. You don't need herman oak tandy would work fine becuase no one will see it, but were is the pride in that. If I make a holster for myself I indulge my self and use good leather and ocasionally tool a design or use a little exotic trim (yes even if it is going in my pocket) both for practice and as an ego stroker. When I make a holster for some one else I do tooling on request regardless of weather its going in a pocket ofr not, it is there CUSTOM ordered holster. I use good leather and do the best i can tooling and dying so that they have a holster they can be proud of and will show others. Also when you take the holster out at night and lay it on your dresser or where ever do you want to look at an old ratty pouch of leather or a work of art. Even the one that Katsass has pictured although plain is nice looking and well done. Why do people who are going to conceal a weapon have fancy wood grips laser etched grips and sometimes even engraving done to their weapons, it's pride and personal customization it's not like some one elses it theirs.

You did not state if you were looking for .45 acp or 45 long colt. Check out these sites. Also some dummy bullets are made to approx size and are for holster display only and may not fit in to a weapon. http://www.amazon.com/Colt-45-Replica-Bullets-Cartridge/dp/B004NT8C4A http://www.amazon.com/Colt-45-Replica-Bullets-Cartridge/dp/B004NT8C4A Denix replicas make the also scroll down the page http://www.discountcutlery.net/en-us/dept_21202.html ,I think they only have for 45 long colt. I have also seen them on ebay and amazon.com Hope this helps. Scott

Check out RMB Custom Leather http://www.allaboutpocketknives.com/knife_store/index.php?store_id=799&&category_id=3628 Rob is a member of this Forum and sells several belt clips and thamb breaks as well as rings blue guns for molding holsters. You can also check out thees sites: http://www.highdesertleather.com/id74.html http://oldfaithfulholsters.com/category/tools-and-supplies/ If by directional snaps you are refering to DOT fastners or Pull the DOT snaps try here http://www.dotfasteners.com/ Scott