Pounder

Once again the generosity of this site and its members is outstanding. Camano Ridge, that was the same post I was searching for, thanks for sharing it again. Dwight, great use of conduit, I will definitely have to try my hand at that although I will probably not get them as nice as yours. Tom G, great simplification of the jig, based on this and some pics I am sure I can make one and save some money. Everyone keep the ideas coming I am sure there are several people who enjoy reading your posts and get an idea or two . And a big thank you to all that have responded.

Morning All: I have been searching for days for a thread that had a self centering hole punch alignment tool but to no avail. During this search I got to thinking there are probably thousands of little hand made jigs, helpers or whatever you want to call them out there that can assist the business leathercrafter. I know there are probably past threads that cover this subject but I cannot find them and (I hope) it never hurts to resurrect a good subject again. So, how about sharing some of those little trick machines that help in the shop and cut down on time. For example, jigs to help with letter placement, hole centering for belts, different stitching ponies, just to name a few. A big thank you in advance to all who participate.

Thank you for the pattern, you are what this site is all about, sharing and education.

Thank you for sharing your pattern, you are what this site is all about. John

Happy Thanksgiving Ray and everyone else: Today I am thankful for my wife, who continues to support my dream, my children and my grandchildren. I am thankful for the family memories I have of family who have pasted. I am thankful my little business continues to grow. I am thankful to have found LW and have met a lot of wonderful people here.

Have to add another for Bob Kovar at Toledo Sewing Machine. I took the plunge about a year past and purchased from him and have never regretted it. At that time I knew nothing about sewing machines (still don't know a whole lot) but I know who I can go to when I have a question and know I will get the straight on it. Just my 2 cents worth.

Thanks for the share of a ingenious design. You are what this site is all about and I have a large scrap heap to get started on.

After being downsized and kicked to the curb, I took the plunge and operate a full time leather business from my home. Over the past three years I have seen a steady increase in profit but I am far from being able to rely on it. Thank heavens for a retirement check. On the up side, I do not mind working hours on end and there is something about a pleased customer that money just can't buy.

Roy Thank you for your offer to share your patterns, I for one am always grateful for any pattern and knowledge imparted with it. I would enjoy seeing all of the patterns you wish to provide. Again thank you, you are what this site is about, sharing and education. John

To prevent or at least minimize leather stretch while stamping always attach non corrugated cardboard to the back of the item you are tooling. When doing so, use a tacky glue or rubber cement to reduce the pull when separating these pieces. Another trick is to use packing tape to prevent stretch, I use both of these and have no problem.

Mark Patterns can be found everywhere but it depends upon your ability to turn a picture into a pattern. I suggest you study how patterns are made, which lines to cut which lines to just bevel, etc. It will not be long before you can produce an piece of leather art from any picture or your own ideas. Also check out tattoo books, woodburning books, wood carving books, they all offer patterns which can be used for leather. Good luck on your search. John

Thanks for the share, some really good information. Another example of what this site is all about, good people and education in leather.

Will do and thanks again Steve.

Thanks Steve I really appreciate your input. I have the operators manual. I am beginning to think you are right, just go for it. Again thank you, this is what this site is all about, helping others and education. John

Cowboy Bob and Royal Design Leather Thanks for the advice. sounds like Singer had the right idea but a poor attitude. I will contact Singermania (Steve) and see what he has. Again thanks to you both, this is what this site is all about, helping others.

Good Morning All: I have a Singer 45K50 that I want to restore. I have been seeking a repair manual but cannot locate one, if in fact it does exist. I have searched the Singer sites and have found operating and parts manuals but no repair manuals. Is there a specific manual or one that covers several classes of this Singer model? Is this Singer model comparable to another brand model that I could obtain that manual? I appreciate any help that can be provided. Pounder

Thanks to you all for the suggestions and recommendations. Cannot wait to try one of them just to see what happens, heck I might do them all so I know it is really clean. Okay maybe not. I do get the idea, soak the ---- out of it and let it set. Then scrub, rinse and repeat. Thanks again to all who posted and hope everyone gets something out of this.

I am attempting to clean and hopefully salvage and use this Singer 45K50. The machine is in primarily good shape except it "groans" at a certain point when you hand turn the wheel. I have had this explained to me as "metal galding" and a good bath might make it stop. I am appealing to the knowledge of you old timers, like me, that know these things, this machine was manufactured in the 1920's. I would like the bath this machine in something and would like to hear some product or home concoction recommendations or direction before proceeding. Thanks all, can't wait to read the responses Pounder

Nice job.

Hello Mike Welcome to Leatherworker.net, imo the best leather site on the internet today. I have been tooling for 30 + years and thought I knew a thing or two about leather until I found this site. I recently retired and opened a small leather shop in my home, not trying th corner the market just make a little pocket money. Anyway, again welcome, look forward to seeing some of your stuff. I would encourage you to become a contributing member, I have saved so much from tips from this site it is well worth it. Enjoy.

Camano Ridge Thanks for the offer, PM sent.

Help: Does anyone have a pattern for a .22 caliber two shot derringer, OWB? I have searced the forums and found nothing. If you do not have, can you direct me to some site, place or book that might have one? I am confortable making holster but this one is giving me fits. I know I can rely on someone having it and thank you in advance for sharing. John

Great video, cannot wait to see the next one.

Not sure if this is proper, so if it is not, my deepest apologies but just wanted to get this out one more time. This is a great machine that just needs someone who knows about them. The price is negotiable. Might even consider the right trade and cash, if related to leather. Putting it out here first before offering to others, e-bay, Facebook, etc. Come on fellow leather rafters, let's make a deal.

According to Singerco.com, this machine was manufatured in 1920 and is still running strong today. It is equipped with a Clark, Single Phase 1/4 HP Motor, Type C, Medel:CR, serial #25 and it works. All of this is mounted on a 2" solid oak table with strong metal frame support. Unusual pedal set up. I am selling because it is to much machine for me. I am sure the right person could make this machine spin like a top. Asking $750. If intrested send me a PM, I live Central IN. Singer Ad 2.doc Singer Ad 3.doc Singer Ad 4.doc Singer Ad 6.doc Singer Ad 7.doc Singer Ad 8.doc Singer Ad 9.doc Singer Ad 10.doc Singer Ad 11.doc