LeatherLegion

Here is another lot of 100 leather fobs/key chains blanks that will allow you to put your own touch and customize them any way you want. They are cut out of 7-8 oz black leather that has a nice wrinkled finish , are 16cm long and 3cm at the widest point ... cutting mat's squares are 1in. Price for the whole lot is $100 ... shipping included anywhere in US and Canada Also if you have a particular design in mind just let me know as I might be able to accommodate custom designs too Thank you !

That's a good looking wallet !!!

If both dogs are fully grown you can keep the number of holes for adjustment to a minimum...Thickness of the collar will affect the size...more so on small size collars. I ask my costumers to measure their dogs neck circumference at the smallest part...snug...no fingers in-between the neck and the measuring tape .Make sure the inside circumference of your collar, while buckled up, will match that size . Measured flat on the table , it will be probably 1-2in longer depending on how thick the collar is. Good luck with them and don't forget to post pictures

. Try cutting it with the hair-on side down, holding up , off the table a bit while running the knife through it.

Not a fan of hair-on ...but that's a cool looking bag !!!

On light color belts I usually don't finish the edges...just a matter of personal preference . On the black I got the edges finished properly.

Here are 2 new belts made out of 9-10oz stitched all the way around with heavy duty #346 thread. I tried to avoid bulking up the buckle end by setting the buckle in place using 2 small steel tabs . Comments are welcomed . Thanks !

Similar in style to a biker wallet...2 larger pockets and 2 card pockets...5in long and about 4in deep. The card pocket in the front was cut using one of the clicker dies I put up for sale Just bought a "day light" light bulb and this is the first time I got true color shades in the picture...pretty happy with it. I just have to come up with a small light box now Any comments would be appreciated. Thanks !

New price... $100usd shipping included within N America

$100 for the pair + $20 shipping within N America

The large squares on the cutting board are 1in...the small ones are 1/4in. The vertical die is pretty much 2.75 / 3.75in ...the other one is 4 / 2.5in Shipping to US should not be over $20 either you get one or both of them Thanks !

Up for sale are 2 card pocket clicker dies....horizontal and vertical. Both are slightly used but in excellent condition, used only with a hand clicker press . $110 for the pair or $60 each + shipping cost Thank you !

5in long , 4in wide when closed, made out of veg tan 4-5oz (Tandy's European single bends)stitched all the way around with #138 on a CB4500. I finally got the airbrushing right this time around. Same wallet design but with a zipper pocket in works right now. As usual , any comments including critiques are more than welcome

Quick update : I just looked into this dinosaur leather and it's pretty much legit. The leather comes from a small , family owned dinosaur farm out of Arizona. and they have few distributors across US. I just got off the phone with one of the owners , Fred , which seems to be a very nice guy ....also very helpful and knowledgeable , and I was told that the dinosaurs are bred and raised executively for their hides as the meat tastes like chicken and nobody is interested He also said that next year is planning on getting few dragons for the same purpose . One of his distributors (Exotik Skins 'r us) also carries hair-on werewolf and gargoyle hides , unicorn shell cordovan and hopefully starting next month , he will stock mermaid skin tanned using pixie dust ...which should be great for card holders and such ... So...yeah...so much for "dips" DoubleC...

JREESER1 ...did you ripped me off brother ??? DoubleC seems to know what she is talking about. I will google it anyway just to make sure.

Here is a smaller version with an extra pocket inside the flap and the other ones facing inwards . I also took Chief's advice and use the domed part of the line #24 snap on both sides

That's one small shoulder...only 1100 square feet??? What's the belt for? 2in wide sounds a bit extreme for any project .

He actually bought a shoulder ...he gave me a piece big enough to make this collar. Thanks JREESER1 !!!

Neatsfoot oil anyone ?

Sold ! If somebody else is interested just e-mail me please as I can cut more. Thanks again !

I actually have around 50 of them...I'll take $50 + shippng

For those of you interested here is wallet unfolded

Thanks Chief...I am gonna give it a shot for sure. I made few wallets where I actually went the other way around using the flat back of the snap on both sides ...I just needed that low profile sandwiched in-between two plys of leather

Joe...go ahead brother !!!...lol...I am gonna post a picture of the main part of the wallet unfolded soon as I have a chance , just to give you a better idea

Playing around with some ideas...one piece of leather , 2 card pockets ... one on the inside and one on the outside for most used card...bills fit nicely without the need to fold them. I might go with 2 stacked pockets on the inside. For this one I used 4-5oz chrome tanned , stitched with #138 on a Cowboy CB4500 Any comments are more then welcome. Thank you !