Jump to content

Studio-N

Members
 View Profile  See their activity

  • Posts

    1,035

  • Joined

  • Last visited

 Content Type 

Everything posted by Studio-N

  1. Studio-N
    Delrin embossing plates for billfold 3 x 3. $50 Additional priority mail shipping. Paypal accepted. See some of my other plates here.
  2. Studio-N
    NEW Delrin embossing plate for roper wallet, checkbook or billfold. $50 Addional priority mail shipping. Paypal accepted. See some of my other plates here.
  3. Studio-N
    Two embossing plates depicting sayings inside the outline of firearms. These are for a press and are under 9" long so they will work on most bifolds and wallets. Additional Priority mail from 75217. Paypal accepted. See some of my other plates on here.
  4. Studio-N
    dBay and their ex-wife Paypal will NEVER under any circumstance stand behind their sellers.
  5. Studio-N
    The wings are sold.
  6. Studio-N

    just let me know if you didn't get the pictures. There is not verification that the messages were received. thanks.

  7. Studio-N
    I will press them in the morning
  8. Studio-N
    Up for sale are a series of embossing plates. These are all Bunkhouse Tool designs before they started making them out of poly-resin. I think these are pretty well priced to sell since normally get $35-$50 for delrin plastic stamps. The whole lot for $320 before it gets pieced out. Will ship priority mail or ground due to weight. Paypal accepted. cheers!
  9. Studio-N
    SOLD 09/09/19
  10. Studio-N
    Sorry - sold in like 5 minutes. This is a 3 piece clicker die set for making an old style free spirit bag/purse like shown. The ejection rubber is shot and needs to be replaced. these are 3/4" clicker dyes. They probably need to be resharpened but are otherwise in good shape as well as the hole tubes. Ship by priority mail or UPS ground from 75217. Paypal accepted.
  11. Studio-N
    For sale are 3 heavy duty steel rule dies for making a cigarette case with flap that will also hold playing cards. Case is as pictured but Leather would be unpunched. As seen, each die is mounted on 1-1/2" boards with a metal plate between the layes for strength and rigidity. Total weight is 12-13 lbs and will ship via ground or priority mail. Shipping is calculated from 75217 and will be quoted on request. Paypal accepted. $100 plus shipping.
  12. Studio-N
    just use a reciprocating carver. You may have to cut off most of the handle for the stamp to fit in the collet, so don't use your best tools.
  13. Studio-N
    I have done up to a 9x9" plate with the same HF 1 ton arbor press. You just can do it all at once. Press, move everything over 1" (which is the size of the ram), rinse and repeat until you cover the entire surface with maybe some overlap presses. works fine.
  14. Studio-N
    Hopefully they've picked a price point that is good.
  15. Studio-N
    I only see one price online. haven't been into a store in a while. did they drop their wholesale club pricings?
  16. Studio-N
    they've tried that before but were to expensive and eventually dropped them too.
  17. Studio-N
    I hope it's different in the leather business, but in the machine shop world Apprenticeships have another name - slave labor.
  18. Studio-N
    Perhaps Kalifornia can set up a sanctuary city that can sell pro dyes.
  19. Studio-N
    the fact it is part of their Eco-foo-foo line should have been the first clue. Expect it to be discontinued in a year or too now that the word is out that it is just another acrylic in neat-lac clothing.
  20. Studio-N
    you can find many, many of them on ebay.
  21. Studio-N
    A simple 1 ton from Harbor freight is all you need. You can get extra pressure if you add a press foot such as this: Press foot. However, I have done a 10x10 plate with just the 1" square ram of the arbor press. Start in a corner. Press. Move the workpiece over 1" (the size of the ram). Press. Rinse and repeat until the entire area is covered. 1 ton arbor press is $60 at harbor freight. cheers!
  22. Studio-N
    The Evil Empire (tandy) just discontinued these. They are probably still available in the warehouse. You can get a mgr to check the stock and can special order the ones you need if they don't still have them on hand, Here's a link: alphas
  23. Studio-N
    I saw in the new Tandy catalog that they will be selling NeatLac again. Then I read a little closer and see it is a water based Eco-Foo-Foo product. So it's probably not a lacquer and really an acrylic. I think I'll stick with the 'real' neatLac from SLC. Let us know if you try it.
  24. Studio-N
    Here's hoping they don't get sued by Tippman for copywrite infringement like Tandy did over the stichbastard they almost made. they seem to think they are the only ones that can make a handle powered sewing machine.
  25. Studio-N
    I like this answer. I'm certainly creative. I reproduce and combine things in different ways to give my work a decorative flare. but that to me is just something that adds to my craft and value of the item. cheers!
×
×
  • Create New...