OLDNSLOW

I will have to get some photos up a little later but, I have 2 glock 43's I only need one, I also have 3 different 1911 full size mold guns when I only need maybe 2 of them, one with a rail and one with out. What I need is a Glock 26, and a Glock 19, I just haven't taken the time to order these. I also have 1 CZ97b and one CZ 75b I think that is the model of the 2 I think that compact is the one I want to keep, I ordered the 97b by accident when I actually needed the compact so the larger model hasn't been used. the CZ mold guns are true blue guns the 43 and 2 of the full size 1911 are those green ones that guys buy to do Kydex with. Let me know If y'all have any interest in buying or horse trading works either way but prefer to trade so I don't in return have to hunt down the other 2 Glocks. Thanks Ron

Ya I knew one of them gals from New Zealand they do real well in tropical areas don't know to much when ya freezem up thow maybe just keep a portable heater nearum and she might think it just blowing sand in the wintertime.

whew glad to hear that, I thought for moment there that we might uh lostya fer good

what he's offering there is not a bad deal ya otta be on that like stink of a stick, don't pass it up I was payun 14.00 a foot when in a spot and needed to get it.

others I hope will chime in but I would look to tandy, you can go online and sign up for their email stuff or go into a store if one is close to you fins some small stuff.

will do when I emailed them to myself I chose the small size so that they will post here so I'll step it up some when done.

That's belly leather probably ok to practice and learn with, some do use it for some things such as belt liner, but most wont use it for a top layer. Being that it is belly it goes through the stretch and restrict action on the cow so now wonder it was moving around when wet molding. Get yourself some inexpensive stuff from tandy and so over or expect to have the movement happen again when wet molding. just sayun

well then, hope to see you still contribute and doun some stuff, make and post some holsters or pdf's:) once in a while but again good on ya, hmm must be married to a dr my mind says to myself

What is or was the top coat? I hope it was only dye on the top, I think most if not everyone dyes the leather then wet mold then when dry apply the top coat of clear, mop and glow or what every you choose to use.

ok hope this works a couple of photos, neither of these are done there along ways from that, I keep thinking about airbrushing that inside of the back part just haven't nailed down the color. The inside of these holsters are lined with about 1.5oz of veg tanned piggy

So true, so I guess it is a trade off. Don't know how this is gonna work here gonna try and post a photo if it doesn't ork I'll try again later, yup need to resize be back later, it gives me time to warm up my cast iron drawers before I slip into them

Wow bummer from my point of view any way but good on you, I didn't think you were old enough or maybe you were smart enough to sock away some cash that makes this possible! Again good on you, really hate to see you go, but also hope that you'll still be around to contribute. There must be several that owe you a great deal of thanks, me being one of them!

if I'm not mistaken the second came in the 6.80 box and was still like 13.00 for shipping, I hate to use the word ripoff but where the prices for the scrap is reasonable there diggen in your drawers ta geddit on way or the uther.

Yes I like the Caiman and the elephant, I just glued up and stitched the panel today, fist time ever using it so wasn't sure how it was going to sew it, it was a real bear to cut and match up to the leather. As soon as it is done I will post some photos here after I slip in to my cast iron drawers.

just a report back, I am happy with the items that came in from Maverick but the shipping cost is a real sack buster. Both orders came in small flat rate boxes and were real light wait, in fact I commented during me second order about the cost of shipping and they seemed to have dropped it a little. I have sent belts from where I am to the west coast for less than 8.00 and I have been paying maverick way more than that for something that is like one fourth the wait godda be a better way. You would think that is they have the volume that they do, they could work out a better rate just sayun.

I had run into the same problem that biker had with some leather I was working with so I put in a call to Kevin at SLC, he had 2 suggestions to correct the problem. One was to dilute to 50/50 with the denatured alcohol, due to the mixing at the factory, Fiebing's is know for mixing in very high concentrates. The other was to address the problem with the leather, he indicated that I would need to air brush the leather to help correct the problem, and I have to say he was right on both parts. And this isn't a comment to promote them as I don't work for or represent them.

Ya now they are huffing or puffing crap that you wouldn't even think about getting high on, not to mention all the bad drugs going around. Things certainly haven't gotten any better, if fact they are worse. I commented a while back, and in a different post obviously that you and I are about that the same age, but it is truly sad when we hear about all of the bad stuff going on now that is much worse than it was 40 years ago when we had the hippie movement, but oh well this will just go off center. To bad they didn't send someone out to pick it up.

Did you inquire as to why the need for the info for a can of glue? Or did they think that maybe at your age your sniffing the stuff or giving it to little kiddies? Seems like a bunch of bs for a can of glue!

I guess this next payday I'll finally have to spend a few bucks and get a stamp, got most everything else needed just a matter of getting one now from studio n

Thanks all, and really like that holster! have you ever caught yourself leaning over to look at something that isn't 3 dimensional or wont move like a referee in a game on TV? That is what I was doing to look at the edges, then I thought to myself you dumb arse ya kant see it.

Ya I had a drop or sweat hit some leather the other day, makes for a bad day.

its ok as along as you didn't wake up withsomeone elses other half that could lead to a shooten!!!

Thanks yes photos always help and makers names can be mentioned as far as I know other wise no one would ever find out who made it!

photos photos no photos it didn't happen need evidence of said work.

ok so to ask a different Q, who has a decent stamp for reasonable dollars?